JaLCDOI 10.18926/14081
フルテキストURL Mem_Fac_Eng_OU_41_1_20.pdf
著者 今村 拓司| 小西 正躬| 今井 純|
抄録 In this paper, we propose a simultaneous optimization method for inventory control and production planning problem for a chemical batch plant. The plant consists of blending process, intermediate storage tanks and filling process. In the proposed method, the original problem is decomposed into production planning sub-problem and inventory control sub-problem. Then the decision variables are optimized by alternately solving each sub-problem. The solution of the proposed method is compared with that of centralized optimization method. The effectiveness of the proposed method is investigated from numerical computational results.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2007-01
41巻
1号
開始ページ 20
終了ページ 30
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308626
JaLCDOI 10.18926/14080
フルテキストURL Mem_Fac_Eng_OU_41_1_11.pdf
著者 Nogami, Yasuyuki| Morikawa, Yoshitaka|
抄録 This paper proposes an algorithm for generating irreducible cubic trinomials in the form x(3) + ax + b, b ∈ F(p), where a is a certain fixed non-zero element in the prime field F(p). The proposed algorithm needs a certain irreducible cubic trinomial over F(p) to be previously given as a generator; however, the proposed algorithm can generate irreducible cubic polynomials one after another by changing a certain parameter in F(p). In this paper, we compare the calculation cost and the average computation time for generating an irreducible cubic polynomial, especially trinomial, among Hiramoto et al. irreducibility testing algorithm, Berlekamp-Massey minimal polynomial determining algorithm, and the proposed algorithm. From the experimental results, it is shown that the proposed algorithm is the fastest among the three algorithms for generating irreducible cubic trinomials.
キーワード irreducible cubic polynomial minimal polynomial
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2007-01
41巻
1号
開始ページ 11
終了ページ 19
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308381
JaLCDOI 10.18926/14082
フルテキストURL Mem_Fac_Eng_OU_41_1_31.pdf
著者 濱名 良平| 小西 正躬| 今井 純|
抄録 Various kind of productions are made in semiconductor factories, where it employs the production system with multiprocess and multiple Automated Guided Vehicles(AGVs) for transportation. It is difficult to optimize planning of production and transportation simultaneously because of the complicated flow of semifinished products. This paper describes the formulations of production scheduling and transportation routing, and algorithm for simultaneous optimization of plannings by using logic cuts. The entire problem is decomposed to the master problem and the sub problem. If it derives the infeasible solutions, new constraints are added to the master problem to eliminate the solution area including infeasible solutions. The results of about optimality and computation time by using CPLEX solver are shown compared with conventional decomposition method to check up effectivity of proposed method in small size problem, and about optimality and computaion time for large scale problem.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2007-01
41巻
1号
開始ページ 31
終了ページ 43
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308108
JaLCDOI 10.18926/14119
フルテキストURL Mem_Fac_Eng_OU_40_1_31.pdf
著者 小川 貴史| 東辻 千枝子| 鶴田 健二| 東辻 浩夫|
抄録 We analyze the melting of spherical Yukawa clusters by Monte Carlo simulations. Spherical clusters are expected to be found in dusty plasmas in an isotropic environment such as microgravity and serve as a model for classical clusters. We obtain the specific heat through fluctuations of the potential energy and identify its peak as the transition temperature. Melting temperatures are compared with those of bulk Yukawa systems and it is confirmed that the melting temperature increases and approaches the bulk value with the increase of the system size.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 31
終了ページ 35
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308329
JaLCDOI 10.18926/14125
フルテキストURL Mem_Fac_Eng_OU_40_1_78.pdf
著者 船曳 信生| 磯貝 愛| 東野 輝夫| Oda Masashi|
抄録 A variety of studies on face components such as eyes, lips, noses, and teeth have been proceeding in medicine, psychology, biometrics authentication, and other areas. In this paper, we present an algorithm of extracting eye contours from a face image using the deformable template matching method. Our template for an eye contour is composed of three quadratic functions for the perimeter and one circle for the pupil. In our algorithm, a digital color face image is rst converted to a binary image of representing eyes, after the region around eyes is identied on the face image by using hues and values of the color image. Then, parameters in the template are optimized by a local search method with a tabu period and a hill-climbing, so as to t the template to the eye contour in the binary image. The accuracy of our algorithm is evaluated through sample face images of students. In addition, the application of our proposal to eye shape indices is investigated in a face image database "HOIP", where recognizable dierence exists in index distributions between males and females.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 78
終了ページ 82
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308500
JaLCDOI 10.18926/14120
フルテキストURL Mem_Fac_Eng_OU_40_1_36.pdf
著者 内田 厚| 東辻 千枝子| 鶴田 健二| 東辻 浩夫|
抄録 We present a Stochastic-Difference-Equation (SDE) approach to long time-scale molecular dynamics (MD) simulations, which are required for nanosecond-scale phenomena. In this method, the MD trajectory in a fixed time period is obtained as a stationary solution of an action functional based on an error accumulation of the equation of motion along the path, thus reducing the problem to a boundary-value problem, instead of an initial-value problem in the ordinary MD method. We apply the method to formation processes of Cu thin film via nanocluster deposition onto a substrate. The applicability of the SDE algorithm to the problem and the effects of the choice of SDE parameters on the optimization processes of configuration pathway are examined.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 36
終了ページ 39
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308517
JaLCDOI 10.18926/14121
フルテキストURL Mem_Fac_Eng_OU_40_1_40.pdf
著者 三宅 隆| 東辻 千枝子| 鶴田 健二| 東辻 浩夫|
抄録 The electron system of arbitrary degeneracy can be mapped onto a classical system where electrons of the same spin are assigned an additional interaction and the effect of degeneracy is taken into account through an imaginative temperature. We apply this method to electrons in quantum dots modeled as two-dimensional electron liquid confined in a finite domain by a harmonic potential. We analyze distribution functions by molecular dynamics instead of solving integral equations which are not so useful in the case without translational invariance.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 40
終了ページ 43
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308268
JaLCDOI 10.18926/14124
フルテキストURL Mem_Fac_Eng_OU_40_1_64.pdf
著者 金谷 健一|
抄録 This article summarizes recent advancements of the theories and techniques for 3-D reconstruction from multiple images. We start with the description of the camera imaging geometry as perspective projection in terms of homogeneous coordinates and the definition of the intrinsic and extrinsic parameters of the camera. Next, we described the epipolar geometry for two, three, and four cameras, introducing such concepts as the fundamental matrix, epipolars, epipoles, the trifocal tensor, and the quadrifocal tensor. Then, we present the self-calibration technique based on the stratified reconstruction approach, using the absolute dual quadric constraint. Finally, we give the definition of the affine camera model and a procedure for 3-D reconstruction based on it.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 64
終了ページ 77
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308332
JaLCDOI 10.18926/14123
フルテキストURL Mem_Fac_Eng_OU_40_1_53.pdf
著者 金谷 健一| 菅谷 保之| Hanno Ackermann|
抄録 In order to reconstruct 3-D Euclidean shape by the Tomasi-Kanade factorization, one needs to specify an affine camera model such as orthographic, weak perspective, and paraperspective. We present a new method that does not require any such specific models. We show that a minimal requirement for an affine camera to mimic perspective projection leads to a unique camera model, which we call a symmetric affine camera, which has two free functions. We determine their values from input images by linear computation and demonstrate by experiments that an appropriate camera model is automatically selected.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 53
終了ページ 63
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308664
JaLCDOI 10.18926/14122
フルテキストURL Mem_Fac_Eng_OU_40_1_44.pdf
著者 菅谷 保之| 金谷 健一| 金沢 靖|
抄録 Dense point matches are generated over two images by rectifying the two images to align epipolar lines horizontally, and horizontally sliding a template. To overcome inherent limitations of 2-D search, we incorporate the “naturalness of the 3-D shape” implied by the resulting matches. After stating our rectification procedure, we introduce our multi-scale template matching scheme and our outlier removal technique using tentatively reconstructed 3-D shapes. Doing real image experiments, we discuss the performance of our method and remaining issues.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 44
終了ページ 52
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308593
JaLCDOI 10.18926/14098
フルテキストURL Mem_Fac_Eng_OU_40_1_16.pdf
著者 阿部 快洋| 小西 正躬| 西 竜志| 今井 純|
抄録 In this study, auto tuning of PID control gains in hot strip looper controller is made based on RNN model. Neuro emulator is employed to model the characteristics of looper dynamics. Combining neuro emulator and RNN model, auto tuning system of PID control gains is constructed. As the inputs to RNN, plural evaluation functions which reflect individual preference of human experts. Further, Self learning mechamism is embeded to RNN model which enables adaptation to the change in rolling chracteristics. Through numerical experiments, the effect of the proposed method is ascertained.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 16
終了ページ 22
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308615
JaLCDOI 10.18926/14097
フルテキストURL Mem_Fac_Eng_OU_40_1_9.pdf
著者 貫名 高史| 小西 正躬| 西 竜志| 今井 純|
抄録 Controls of the temperature, pressure and flowing quantity are important for the stable operation of the product quality in the distillation tower. The usual measuring way of product quality estimation is made by the off-line analysis. In this paper, online estimation method of product quality is studied for improving the product quality. The estimation method based on stochastic analysis was developed for online estimation. In this paper, the data of temperature, pressure and flow volum in the distillation tower are treated. As the estimation models, RNN (Recurrent Neural Net Work) and PLS (Partial Least Square Regression Method) were adopted. The actual plant data were used in the analysis. Both PLS and RNN models could compensate each other to improve the accuracy in estimation.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 9
終了ページ 15
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308095
JaLCDOI 10.18926/14126
フルテキストURL Mem_Fac_Eng_OU_40_1_84.pdf
著者 Nogami, Yasuyuki| Morikawa, Yoshitaka|
抄録 This paper particularly deals with elliptic curves in the form of E(x, y) = y(2) − x(3) −b = 0, b ∈ F(* q) , where 3 divides q−1. In this paper, we refer to the well-known twist technique as x-twist and propose y-twist. By combining x-twist and y-twist, we can consider six elliptic curves and this paper proposes a method to obtain the orders of these six curves by counting only one order among the six curves.
キーワード elliptic curve twist third power residue/non-residue
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 83
終了ページ 94
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308548
JaLCDOI 10.18926/14096
フルテキストURL Mem_Fac_Eng_OU_40_1_1.pdf
著者 馬 有理| 清水 憲一| 鳥居 太始之|
抄録 A testing for bent fatigue crack propagation under mixed-mode conditions was carried out using fatigue and annealed slant precracks with different slant angles, β ,defined as the angle between loading and precrack directions in a rectangular plate. As a result, bent fatigue crack from the fatigue precrack with β =45deg. propagated under mixed-mode conditions with mode II stress intensity factor (K(II))(est) evaluated from the discontinuous displacement measured along the crack. On the other hand, bent fatigue crack from the fatigue precrack with β =60deg. and from the annealed precracks with both slant angles of β =60deg. and β =45deg. propagated under the mode I behavior. This was because the compressive residual stress near the fatigue precrack caused contact to each other between the upper and the lower surfaces of the precrack with the smaller slant angle β . Furthermore, the fatigue crack propagation rates indicated almost the same relationship for all the data, using the mixed-mode effective stress intensity factor (K(M))(est), calculated from the discontinuous displacement measured along the bent fatigue crack.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 1
終了ページ 8
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308402
JaLCDOI 10.18926/14099
フルテキストURL Mem_Fac_Eng_OU_40_1_23.pdf
著者 菊池 純二| 小西 正躬| 西 竜志| 今井 純|
抄録 In steel works, iron ores are stored in ore yard and sent to various plants of down stream accoding to transfer requests. To attain stable operation, it is neccesary to keep a certain allowable stock level in ore tanks of all plants. To this purpose, ore transfer routing method has been developed based on decentralized agent method. In case of disaster such as a big earthquake or a big fire, damages in the facilities of industrial complex may be unavoidable. In this paper, decentralized optimization method is tested to cope with such emergencies. Decentralized agents corresponding to kind of ore make their own transfer route plan exchanging information with others. As the application of the proposed method, transfer scheduling in ore yard in steel works are made in case of destruction of transfer facilities.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 23
終了ページ 30
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308160
JaLCDOI 10.18926/14152
フルテキストURL Mem_Fac_Eng_39_1_52.pdf
著者 金森 克也| 東辻 千枝子| 鶴田 健二| 東辻 浩夫|
抄録 Thermal behavior of Coulomb clusters in a three dimensional confining potential is investigated by molecular dynamics simulations for system sizes of 1,000 to 20,288 ions. The specific heat of the system of shell-structured 20,000 ions is peaked almost at the same temperature as the system of bcc-structured 20,288 ions with much sharper structure for the latter. The diffusion coefficient and the peak to valley ratio of the two-dimensional pair distribution function on the outermost shell are obtained both as a function of temperature. The rotational movement of each shell in the system of 104 ions is observed.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2005-01
39巻
1号
開始ページ 52
終了ページ 55
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308445
JaLCDOI 10.18926/14155
フルテキストURL Mem_Fac_Eng_39_1_63.pdf
著者 金谷 健一|
抄録 Geometric fitting is one of the most fundamental problems of computer vision. In [8], the author derived a theoretical accuracy bound (KCR lower bound) for geometric fitting in general and proved that maximum likelihood (ML) estimation is statistically optimal. Recently, Chernov and Lesort [3] proved a similar result, using a weaker assumption. In this paper, we compare their formulation with the author’s and describe the background of the problem. We also review recent topics including semiparametric models and discuss remaining issues.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2005-01
39巻
1号
開始ページ 63
終了ページ 70
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308366
JaLCDOI 10.18926/14153
フルテキストURL Mem_Fac_Eng_39_1_56.pdf
著者 菅谷 保之| 金谷 健一|
抄録 We present a new method for extracting objects moving independently of the background from a video sequence taken by a moving camera. We first extract and track feature points through the sequence and select the trajectories of background points by exploiting geometric constraints based on the affine camera model. Then, we generate a panoramic image of the background and compare it with the individual frames. We describe our image processing and thresholding techniques.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2005-01
39巻
1号
開始ページ 56
終了ページ 62
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308594
JaLCDOI 10.18926/14149
フルテキストURL Mem_Fac_Eng_39_1_40.pdf
著者 Al-Sehaim, Sulaiman| 小西 正躬| 能勢 和夫|
抄録 In this paper, two problems, plant allocation problem and that of transfer routing from plants to customers, are considered simultaneously. Especially, adaptation scheme for emergency cases are checked. To solve these problems, decentralized agent based optimization procedures are used. In our study, oil production and products transfer in Saudi Arabia are treated. Through numerical experiments, practicability of the proposed method is verified.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2005-01
39巻
1号
開始ページ 40
終了ページ 45
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308505
JaLCDOI 10.18926/14134
フルテキストURL Mem_Fac_Eng_39_1_1.pdf
著者 Vladimir I. Klochikhin| 藤井 正浩| 吉田 彰|
抄録 Improvement of wear resistance and durability of machine elements with sliding friction pairs is the important tribological problems. The wear resistance has been determined with many configurative parameters, technological parameters, and operational parameters. In this study kinematics of cylindrical joint (CJ), whose motion is reciprocating and rotating, and influence of various parameters on wear resistance of friction pair was investigated.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2005-01
39巻
1号
開始ページ 1
終了ページ 6
ISSN 0475-0071
言語 English
論文のバージョン publisher
NAID 120002308183