Conditions

close

result 9304 件

JaLCDOI 10.18926/15719
FullText URL Mem_Sch_Eng_OU_13_163.pdf
Author Tanada Yoshihiro| Sano Hiroya|
Abstract A new waveform analyzer based on the Walsh transform is developed and is applied to a real-time filtering of fast pulse signals, and the linear filterings of time signals through the Walsh transform is discussed. The analyzer converts a solitary waveform during 16 μs into the 16 Walsh amplitude spectra in a hybrid manner: it has the sequency band from 62.5 kzps to 500 kzps. The spectra are parallelly held during 16 μs by analog integrators, while serially displayed by the CRT, and one of them is digitally read out. The spectra of the test waves are measured within the error rate of several per cent. The analyzer is applied to the correlative detection of the photoelectric pulse signals in a gasspectroscopic system using a pulse laser, and there composes the matched filter, which is useful for measuring the signals superposed by Gaussian noises with a high accuracy. For the real-time filtering of fast signals, the arithmetic convolution and the frequency power spectra are approximated using the complex Walsh transform. These approximations are of practical use in 16 or 32 dimensions. Then, the matched filters for pulse peaking are given by the approximate convolution and by the dyadic convolution.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1979-03-05
Volume volume13
Start Page 163
End Page 180
ISSN 0475-0071
language English
File Version publisher
NAID 120002307519
JaLCDOI 10.18926/15717
FullText URL Mem_Sch_Eng_OU_13_153.pdf
Author Fukui, Kiyoshi| Nogi, Shigeji| Yamada, Masuo| Sakakibara, Akira|
Abstract A unified treatment of injection and mutual phase locking phenomena in microwave oscillators coupled by a network characterized by a Y-matrix is presented. Under certain simplifying assumptions, steady state solutions such as locking frequency and oscillation phase relation are given with emphasis placed on the coupling-network dependence of locking bandwidth. Also, some examples of locking system specified by y(21)=0, Y(21)= Y(12) and y21= -Y12 are briefly discussed.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1979-03-05
Volume volume13
Start Page 153
End Page 162
ISSN 0475-0071
language English
File Version publisher
NAID 120002307532
JaLCDOI 10.18926/15716
FullText URL Mem_Sch_Eng_OU_12_29.pdf
Author Yamamoto Tatsuma| Yamamoto Yoshitake| Nishida Hideki| Yasuhara Kiyotaka|
Abstract The distributed circuit properties based on pores in the etched aluminum oxide film of the electrolytic capacitor have been analysed by the mathematical equation. This paper proposes the selection and the determining method of the parameters appearing in the analysis.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1978-02-25
Volume volume12
Start Page 29
End Page 36
ISSN 0475-0071
language English
File Version publisher
NAID 120002307968
JaLCDOI 10.18926/15715
FullText URL Mem_Sch_Eng_OU_13_133.pdf
Author Ohta, Mutsuo| Kanadani, Teruto| Yamada, Masuo| Sakakibara, Akira|
Abstract Aging and reversion in dilute Al-Ag alloys are studied by means of the measurements of electrical resistivity. Results obtained are as follows: 1) Increase in the as-quenched resistivity is found for a low quenching temperature. This increase may be due to the fluctuation of solute concentration at the quenching temperature. 2) When the fluctuation exists in the alloy, the aging rate becomes slow and the maximum resistivity in the isothermal aging curve becomes small as the vacancyconcentration becomes low. The maximum resistivity becomes large again when the vacancy concentration becomes further lower, and finally the maximum does not appear. 3) These behaviors are explained in terms of the difference in the rate of growth of the G.P. zones in the regions of higher and lower solute concentration induced by the fluctuation and in terms of the change of this difference with vacancy concentration. 4) G.P. zones may be formed by the spinodal decomposition with indefinite surfaces at first, grown to larger ones with difinite surfaces and changed to ordered nzones in the alloy. 5) It is confirmed that G.P. zones are formed by the nucleation-and-growth mechanism also in Al-Ag alloys above the spinodal temperature.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1979-03-05
Volume volume13
Start Page 133
End Page 152
ISSN 0475-0071
language English
File Version publisher
NAID 120002307468
JaLCDOI 10.18926/15714
FullText URL Mem_Sch_Eng_OU_12_23.pdf
Author Yamashita Yuhiko| Monobe Kazuo|
Abstract A new realistic, structural model is proposed for the glassy solid state of poly(ethylene terephthalate) (PET). The model is considered basing on crystallization behaviors from the glassy state of PET, and in particular including the evidence from the estimation of chain folding energy in this report. When PET is quenched from its melt into the glassy state, irregular folds with lower conformational energy remain in glassy structure and disturb the three dimensional arrangement of the chains connected with the folds. In conclusion, we suggested that the structure of glassy PET is not in amorphous state which is represented by the interpenetrating random coil model, but in frozen metastable state which can be approached from the chain folded structure of polymer crystals.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1978-02-25
Volume volume12
Start Page 23
End Page 28
ISSN 0475-0071
language English
File Version publisher
NAID 120002307771
JaLCDOI 10.18926/15713
FullText URL Mem_Sch_Eng_OU_11_2_51.pdf
Author Inouye Hiroshi|
Abstract In this paper some computational methods of traffic assignment are proposed. At first solutions of traffic assignment by the equal travel times principle used nonlinear programmings are showed. They are a method to approximate by a quadratic programming, a method to use the SUMT transformation, a method to apply Rosen's gradient projection method and a method to apply the conjugate gradient projection method. Through a computational example the efficiency of them are compared. To decide route flows uniquely in traffic assignment by the equal travel times principle, a method requesting route flows such that the joint probability is a maximum under supposed a priori probabilities is proposed. In case of a traffic assignment in a large scale road network, it is significant to improve the efficiency of route searches. For this purpose a technique of minimum time route search by division of a network is proposed.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1977-01-25
Volume volume11
Issue issue2
Start Page 51
End Page 71
ISSN 0475-0071
language English
File Version publisher
NAID 120002307829
JaLCDOI 10.18926/15712
FullText URL Mem_Sch_Eng_OU_13_119.pdf
Author Ohta, Mutsuo| Yamada, Masuo| Kanadani, Teruto| Sakakibara, Akira|
Abstract The effects of the fluctuation of solute concentration on the process of aging in Al-10wt % Zn alloy were studied by measurements of the intensity of small-angle X-ray scattering and by electron microscopy. Specimen was quenched from a higher temperature(T(Ql), mainly 300℃) to an intermediate temperature (T(Q2), 110~230℃), held there for a time, quenched again into iced water and aged isothermally at 0℃ or 40℃. Results obtained are as follows: (1) When the specimen was held at T(Q2) for a sufficient time and aged at relatively high temperatue(e.g. Ihr at 125℃ and aged at 40℃), a two-step increasing of both resistivity and integrated intensity was found. (2) Each of the steps has characteristics of the formation of G.P. zones by the spinodal decomposition. (3) When the maximum resistivity(p(max)) takes a minimum, Size distribution of the G.P. zones, estimated from the difference between Guinier and Porod radii, is much broader than that at p(max) in the usual direct quenching. (4) When the holding time at T(Q2) is long enough, the size distribution at p(max) is as broad as that at p(max) in the usual case. (5) After a prolonged aging under the condition that P(max) takes minimum, G.P. zones grow markedly and become oblate ellipsoidal with a major axis of about 20nm. (6) These results are consistently understood in terms of the fluctuation of solute concentration at T(Q2) and the change in the concentration of vacancies during annealing at T(Q2). That is, it is considered that these results are due to the difference in aging behavior between the regions of relatively high concentration and the ones of low concentration induced by the fluctuation.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1979-03-05
Volume volume13
Start Page 119
End Page 132
ISSN 0475-0071
language English
File Version publisher
NAID 120002307931
JaLCDOI 10.18926/15711
FullText URL Mem_Sch_Eng_OU_11_2_37.pdf
Author Kawara Osami|
Abstract In this paper, we compare ozone with chlorine regarding following respects; (1)Disinfection efficiency (2)Oxidation power (3)Effects of secondary effluents treated by ozone or chlorine on aerobic microorganisms. Both ozone and chlorine are powerfull oxidizing agents. However,those are greatly different from each other in effects of treatment. Ozone is superior to chlorine in oxidation of organics, perfection of disinfection and effects on aerobic microorganisms. On the other hand, chlorine is superior in disinfection of Coliform group bacteria. Based on these results,it may be concluded that chlorination will be effective in disinfection of effluents which do not contain so much contaminants. However in case of rather highly cotaminated effluents, ozonation will be suitable.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1977-01-25
Volume volume11
Issue issue2
Start Page 37
End Page 49
ISSN 0475-0071
language English
File Version publisher
NAID 120002307819
JaLCDOI 10.18926/15710
FullText URL Mem_Sch_Eng_OU_11_2_27.pdf
Author Nago Hiroshi|
Abstract In this paper the influence of a vertical lip upon the contraction coefficients of underflow gates is discussed. The coefficients of inclined gates with a vertical lip are investigated theoretically by using the method of conformal mapping. Solutions are obtained numerically for several values of the inclination of gate bottom. Theoretical solutions show that;as the length of a lip increases, the coefficient rapidly decreases from the value for the inclined gate, and when the length becomes of the order of a gate openning,it takes a value to be nearly equal to that for a vertical gate. These theoretical results are verified by experiments.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1977-01-25
Volume volume11
Issue issue2
Start Page 27
End Page 36
ISSN 0475-0071
language English
File Version publisher
NAID 120002307779
JaLCDOI 10.18926/15709
FullText URL Mem_Sch_Eng_OU_13_95.pdf
Author Ohta, Mutsuo| Kanadani, Teruto| Yamada, Masuo| Sakakibara, Akira|
Abstract Aging process in Al-Zn alloys was studied by the measurements of the electrical resistivity when the alloy was quenched from a high temperature, about 300℃ (the first quenching temperature), to an intermediate temperature, between 110℃ and 230℃ (the second quenching temperature), held at this temperature for a time, quenched again into iced water and aged at a low temperature. Variation of the holding time at the second quenching temperature brings about the variation of the isothermal aging curves. Maximum resistivity of the isothermal aging curve, p(max) , decreases at first, passes a minimum and then increases to reach a stationary value as the holding time at the intermediate temperature increases. It is pointed out that this phenomenon is mainly due to the fluctuation of solute concentration and the vacancy concentration decreasing at the intermediate temperature.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1979-03-05
Volume volume13
Start Page 95
End Page 117
ISSN 0475-0071
language English
File Version publisher
NAID 120002307526
JaLCDOI 10.18926/15706
FullText URL Mem_Sch_Eng_OU_13_83.pdf
Author Akagi Fumio| Osaki Hirokazu| Kikuchi Susumu|
Abstract To assign work elements to the work stations in an assembly or manufacturing line, various computer programs have been developed and used. And it does that the number of stations or the cycle time is even given. But in practice it is desirable to obtain the assignment which shows the highest efficiency of line balancing under all possible combinations of the number of stations and the cycle time. Therefore we propose a computer program of the assignment method in which the efficiency of line balancing, Ebb and the number of stations, NN are regarded as variables. In this method the minimum value (EEb) of efficiency and the constant term (d) by which Ebb is reduced are given previously. And for any COmbination of Ebb (EE
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1979-03-05
Volume volume13
Start Page 83
End Page 93
ISSN 0475-0071
language English
File Version publisher
NAID 120002307716
JaLCDOI 10.18926/15705
FullText URL Mem_Sch_Eng_OU_11_1_31.pdf
Author Inouye Hiroshi|
Abstract In this paper we deal with traffic behaviours on a section of highway including an on-ramp by means of queuing theory. It is the purpose of this paper to provide the adequate capacity for highway on-ramps, which is useful for the design of on-ramps and the traffic control of highway. The highway on-ramp merging is modeled as a queue and the system is solved. Then the maximum possible flows for merging from an on-ramp is obtained in a form of an function of through lane flows. The traffic capacity of an on-ramp is estimated from the relation between the average waiting time before merging and the incoming flow from an on-ramp, which is induced by the theory of queues.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1976-07-20
Volume volume11
Issue issue1
Start Page 31
End Page 43
ISSN 0475-0071
language English
File Version publisher
NAID 120002307164
JaLCDOI 10.18926/15704
FullText URL Mem_Sch_Eng_OU_13_65.pdf
Author Ushio Junichi| Osaki Hirokazu| Kikuchi Susumu|
Abstract We try to evaluate the manual work numerically from a point of view of the homogeneousness and the simultaneousness of both hands using the results of the micromotion study. The weighted coefficient and the balance index are used to evaluate the homogeneousness of both hands. And the simultaneous index is used to evaluate the simultaneous movement of both hands. It is necessary to make a program in order to use efficiently the method to calculate the indexes or the coefficients. Therefore the computer program of these methods is mentioned in this paper.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1979-03-05
Volume volume13
Start Page 65
End Page 81
ISSN 0475-0071
language English
File Version publisher
NAID 120002307987
JaLCDOI 10.18926/15703
FullText URL Mem_Sch_Eng_OU_11_1_19.pdf
Author Koga, Ryuji|
Abstract An optimal control is giyen for regulating power distribution in a nuclear power reactor which has cylindrical geometry. The space dependence of the system is described by expanding space depenident variables by Helmholtz modes. Results are obtained through the principle of optimality and are described by the Riccati-type algebraic equation that the optimal feedback coefficients should satisfy. Use of an integral equation as the system equation makes it possible to deal with actual controlling apparatuses: control rods or rod clusters.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1976-07-20
Volume volume11
Issue issue1
Start Page 19
End Page 30
ISSN 0475-0071
language English
File Version publisher
NAID 120002307572
JaLCDOI 10.18926/15702
FullText URL Mem_Sch_Eng_OU_13_53.pdf
Author Funabiki Shigeyuki| Nakanishi Senichiro| Himei Toyoji|
Abstract An ac chopper circuit, which chops an ac voltage in a complete cycle for any lagging reactive load, is devised. The circuit is constructed of two ac-switches composed of power transistors and diodes. The load voltage is smoothly controlled by varying the time ratio of ac-switch. Transistors operate in a highfrequency chopping mode, thereby the ripples of the source current and the load current are easily filtered. Furthermore the input power factor of this model is better than that of the thyristor phase control circuit. In this paper, the construction and the driving method of this model are described.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1979-03-05
Volume volume13
Start Page 53
End Page 64
ISSN 0475-0071
language English
File Version publisher
NAID 120002307832
JaLCDOI 10.18926/15701
FullText URL Mem_Sch_Eng_OU_11_1_7.pdf
Author Ishii Tadao| Doi Mitsuharu|
Abstract An investigation was made of the anomalous electric field in its various aspects in n-type InSb subjected to strong magnetic field at 77K and 273K, which lead to the conclusion that no open contradiction arose between a part of the present observations and the predictions attainable from Yoshida's model of semimetals. There remained, however, the other part of the experimental results unexplained, being rather natural since an inner property of indium antimonide does not seem so simple comparing with the compensated metals, bismuth and antimony. Especially as for the mechanism of an inversion phenomenon of the polarity of a negative anomalous field at a critical pulse current, we have no available theory to explain at present stage.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1976-07-20
Volume volume11
Issue issue1
Start Page 7
End Page 18
ISSN 0475-0071
language English
File Version publisher
NAID 120002307614
JaLCDOI 10.18926/15700
FullText URL Mem_Sch_Eng_OU_13_45.pdf
Author Fujitsuka Takeshi| Agusa Toru|
Abstract In this paper, the steady state operations of the squarewave inverter circuit with a series R-L load are discussed. The circuit consists of transistors and feedback diodes. The basic equation is derived from its equivalent circuit. Solving the basic equation with steady state conditions, the instaneous value of the load current i is derived. The period t(2) for which the current flows from the supply to the load and the period t(l) for which the current feedbacks through diodes from the load to the supply are calculated from (i), and the ratio of t(l) to t(2) is illustrated using power factor of fundamental wave, pf, as a variable. The ratios of transistor mean current I(tr), diode mean current I(D), supply mean current I(s) to the load current I are illustrated using pf as a variable, too. In result, each current ratios to I is shown in simple expressione. The load current can be calculated simply using the coefficient reading off the figure. In addition, it becomes clear from the figure that the load current is scarcely influenced by the harmonic voltage in less than 0.8 of pf. The ratio t(2)/(t(1)+t(2)) calculated in squarewave voltage, shows the limit of pulse width control whose out put voltage is the squarewave.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1979-03-05
Volume volume13
Start Page 45
End Page 52
ISSN 0475-0071
language English
File Version publisher
NAID 120002307473
JaLCDOI 10.18926/15697
FullText URL Mem_Sch_Eng_OU_5_61.pdf
Author Misaki Takayoshi| Okamoto Takuji| Yamamoto Hideki|
Abstract An asynchronous delay line for PAM signal having controlled delay capability is proposed. The delay line in a cascaded chain of identical memory cells. Each sample of the sequence of the input PAM signals passes or is shifted in particular cell depending on whether the succeeding cell is empty or not. A cell is composed of two memory capacitors with the peripheral control circuits. In this paper, especially, an example of the circuit for cell is shown and its several characteristics are discussed. At the end, some experimental results are given.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1970-09-01
Volume volume5
Issue issue1
Start Page 61
End Page 66
ISSN 0475-0071
language English
File Version publisher
NAID 120002307866
JaLCDOI 10.18926/15696
FullText URL Mem_Sch_Eng_OU_13_1.pdf
Author Tanaka Yutaka|
Abstract In this paper, is proposed a calculating method for the simulation of oscillatory combustion state, and comparisons between estimation results and experimental ones are carried out. With respect to the effects of geometric dimensions of combustion system, and of fueland air-flow rate conditions on characteristics such as an amplitude of oscillation, its fluctuation, and a frequency, a theoretical analysis presents a correct estimation of the phenomena. By use of this analysis, it becomes possible exactly to estimate the changes which take place in the combustion system. On the basis of the quantitative feature of the theoretical results, the influences of the factors such as ignition lag, wall temperature ratio, and heat transmission on the combustion oscillation are studied.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1979-03-05
Volume volume13
Start Page 1
End Page 24
ISSN 0475-0071
language English
File Version publisher
NAID 120002307496
JaLCDOI 10.18926/15695
FullText URL Mem_Sch_Eng_OU_10_2_113.pdf
Author Kono Ichiro| Sellmeijer J.B.|
Abstract This paper deals with the groundwater flow in a semi-confined aquifer causing the phenomena of consolidation and free surface lowering. Since the main effect of consolidation has taken place before noticeable lowering of the free surface, one may solve each phenomenon on its own. The real solution may be obtained by the principle of superposition. However, the solution for lowering the free surface is delayed due to the cosolidation by a certain timelapse, depending on the placecoordinates.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1976-01-27
Volume volume10
Issue issue2
Start Page 113
End Page 136
ISSN 0475-0071
language English
File Version publisher
NAID 120002307163