検索結果 745 件
| JaLCDOI | 10.18926/15550 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_78.pdf |
| 著者 | Himei Toyoji| Inoue Jyunichi| Fukumori Kooichi| |
| 抄録 | The operation, mainly in a steady state, of a half controlled single-phase bridge circuit with a finite inductive load, has been treated analytically. Some operation features of particular bridge circuits are discussed. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 78 |
| 終了ページ | 83 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307828 |
| JaLCDOI | 10.18926/15549 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_70.pdf |
| 著者 | Nakata Takayoshi| Ishihara Yoshiyuki| Moriyasu Tadataka| |
| 抄録 | In this paper, we describe the way to compute circuit constants of the impulse voltage generator by means of the digital computer, when an impulse voltage waveform is given. The definition of waveform is to be revised, and this definition is adopted to our computation. From the results, we can see the influence of revising definition upon circuit constants. We also devised graphs, from which we can easily determine the L-C-R circuit constants. (see Fig.2(a)) |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 70 |
| 終了ページ | 77 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307723 |
| JaLCDOI | 10.18926/15548 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_63.pdf |
| 著者 | Mine Tadao| Yamamoto Tatuma| Baba Yukinobu| |
| 抄録 | The well-known steady state solution of nonlinear oscillatory circuits based on the use of Fourier series, the so-called harmonic balance, is a powerful method because of its wide applicability. Yet, this method has not only difficulties to solve transcendental equations or algebraic equations of higher orders, but gives no transient state solution. The harmonic approximation and the extended harmonic approximation defined in this report are linearization methods which give approximations of steady state and transient state simultaneously. Furthermore the method enables an unification and extension of miscellaneous linearization methods. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 63 |
| 終了ページ | 69 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307143 |
| JaLCDOI | 10.18926/15547 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_59.pdf |
| 著者 | Yamashista Yuhiko| Yokoyama Fumiyoshi| Monobe Kazuo| |
| 抄録 | Fujiwara's oriented crystallization method was applied to poly (ethylene oxide) to obtain a uniform texture composed of parallel fibrils which correspond to the structure of a radial direction of spherulites. Two different x-ray diffraction patterns in crystallite orientation of the spherulite radius were obtained. From these patterns and crystallization conditions it could be determined that the spherulite radius has a [401] rotation axis below about 50℃ and two [421] and [421]rotation axes above about 50℃. A reasonable interpretation was given for these two ways of spherulitic crystallization, based on the growth features of lamellar crystals of poly (ethylene oxide). That is, it is concluded that a second order transition in poly (ethylene oxide) lamellar crystals near the temperature of 50℃ is responsible for the change of the rotation axis in spherulite radius. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 59 |
| 終了ページ | 62 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307666 |
| JaLCDOI | 10.18926/15546 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_54.pdf |
| 著者 | Moriwake Tosio| |
| 抄録 | Condensation of 6-methoxy- and 6-methylthio-2-propionaphthone with t-butyl α-bromoisobutyrate gave the corresponding t-butyl β-hydroxy esters in yields of 80 and 84% respectively. The treatment of the β-hydroxy esters with iodine in the presence of red phosphorus in boiling acetic acid effected reductive cleavage to produce 6-hydroxy- and 6-methylthio-α, α-dimethyl-β-ethyl-2 naphthalenepropionic acid in yields of 33 and 34% respectively. Reduction of the former ester in the presence of palladium-charcoal in acetic acid gave α, α-dimethyl-β-ethyl-6-methoxy-2-naphthalenepropionic acid in a 49% yield. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 54 |
| 終了ページ | 58 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307698 |
| JaLCDOI | 10.18926/15545 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_51.pdf |
| 著者 | Moriwake Tosio| |
| 抄録 | Condensation of σt -butyl chloroacetate and ketones by means of magnesium in ether or benzene alone was carried out but the excellent yields of P-hydroxy ester could not be obtained, and the results of the condensation of t -butyl bromoacetate and ketones by means of magnesium and mercuric chloride in benzene were also disappointing. When a mixture of benzene and ether was used as solvent in the condensation of t-butyl chloroacetate and ketone in the presence of magnesium and mercuric chloride, the yields of p-hydroxy esters from cyclohexanone and methyl isobutyl ketone were 62 and 71 % respectively, and were comparable with those of other condensing methods. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 51 |
| 終了ページ | 53 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307140 |
| JaLCDOI | 10.18926/15544 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_47.pdf |
| 著者 | Takeda Akira| Wada Satosi| Ohmura Yutaka| |
| 抄録 | a-Chloro-N-arylisobutyrimidyl chloride (I) reacted with ethyl sodiomalonate to afford N-aryl-2,2-dimethyl-3 carbethoxysuccinimide. This reaction seems to proceed in a different mechanism from that of the synthesis of tetronic acids(2) and is supposed to involve a primary attack of the carbanion at the a-carbon atom of the chloride followed by the cyclization. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 47 |
| 終了ページ | 50 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307888 |
| JaLCDOI | 10.18926/15543 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_44.pdf |
| 著者 | Takeda Akira| Torii Sigeru| |
| 抄録 | Acetylation of γ,γ-dimethyl-α,β-dicarbethoxybutyrolactone in benzene in the presence of sodium hydride was attempted. The structure of the condensation product was assigned to O-acetyl derivative, which was converted into γ,γ-dimethyl-β-carbethoxy-α-carboxybutyrolactone whose structure is also discussed by IR spectrum. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 44 |
| 終了ページ | 46 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307861 |
| JaLCDOI | 10.18926/15542 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_37.pdf |
| 著者 | Takahashi Katsuaki| Tanioka Mamoru| Yoshio Tetsuo| |
| 抄録 | Studies were carried out in order to know in some detail the transport phenomena through the interface in the viscous liquid moving in laminar flow. Experiments were carried out using ca. 88% glycerin solution, one added with an acid, and the other with alkali together with a small amount of phenolphthalein. Acidic glycerin solution was supplied to a long transparent cuvette of rectangular cross section through which the liquid was made to move slowly enough to establish the laminar flow, thin cords of coloured basic solution were introduced in the direction normal to the axis of flow at regular time intervals. The so obtained patterns of bending cords shortening in regular succession were photographed also at regular time intervals. The authors attribute the origin of the changing patterns of the cords to the velocity gradient existing in the acidic solution which accelerates the diffusion by increasing the concentration gradient near the cords as well as the increase of the interfacial area, and also the decrease of the thickness of the cords. Based on these idea a mathematical analysis was carried out and was obtained an equation which gives the change of the concentration distribution of two dimensional cords. Fair agreement was obtained between the results of mathematical analysis and those of experiments. Furthermore, the influence of the thickness of the cords, and that of the velocity gradient as well as of the diffusion coefficient on the concentration at the center of the cords were discussed. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 37 |
| 終了ページ | 43 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307624 |
| JaLCDOI | 10.18926/15540 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_29.pdf |
| 著者 | Takahashi Teruo| |
| 抄録 | In this report, gas absorption by a rotating cylindrical liquid jet, whose water traveling length is short, is considered experimentally. Experiments of absorption are proceeded in pure C0(2) gas and water at 20℃: C0(2) gas is cross-currently contacted with a liquid jet. From experimental results, absorption rate was observed to be large immediately after liquid was spouted from small hole drilled through rotating cylinder. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 29 |
| 終了ページ | 36 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307556 |
| JaLCDOI | 10.18926/15539 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_23.pdf |
| 著者 | Yamada Toshiro| Kitagawa Shigeru| |
| 抄録 | For assessing the qualities of sheet metal for deep-drawing by the tension test, γ value is adopted generally. However, it is difficult and complicated to obtain the precise value of it. In order to obtain the value precisely and easily, the authors have made trialy the devices to measure directly the elongation and the reductions of width and thickness; these devices are transducers to which the electrical resistance strain gauges are applied. By using these devices, precise, continuous, multipoint and quick measurement can be done. It has been clarified by the continuous measurements that γ values are not the same relating to the elongations. It is recommended that one uses γ value obtained at about 25% elongation. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 23 |
| 終了ページ | 28 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307551 |
| JaLCDOI | 10.18926/15538 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_13.pdf |
| 著者 | Kashiwada Yukio| Akiyama Koichi| |
| 抄録 | In order to make clear how the efflux angle changes in a small crankcase scavenged engine cylinder and in a large loop scavenged engine cylinder, the inlet flow pattern in the single cycle model cylinder has been observed by a high speed motion camera. In general, the scavenging air stream is not effluent in the designed direction of the scavenging port at comparatively slight opening, and the efflux angle changes in proportion to port opening advance. In a small crankcase scavenged engine cylinder, to keep the scavenging air stream in the direction of the scavenging port it is effective to incline the scavenging air passage between the crankcase and the cylinder, and to make thicker the cylinder wall where located scavenging port. In a large loop scavenged engine cylinder to coincide the scavenging air stream with the direction of the scavenging port in the early stage of the scavenging, it has an effect to set the guide plate the position of 1/2 at port height. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 13 |
| 終了ページ | 22 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307846 |
| JaLCDOI | 10.18926/15537 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_1_1.pdf |
| 著者 | Honda Kazuo| Konaga Tetsuro| |
| 抄録 | In the field of mechanical engineering, the need for a simple but effective way of evaluating the fatigue strength and lifetime of structural materials is an important problem with which the design engineers have faced. Accordingly, a cunsiderable amount of investigations have been made in this field. However, the basic nature of fatigue damage and the conditions which lead to the initiation and propagation of fatigue cracks are not sufficiently understood. Nor any satisfactory method of assessing the exact state of fatigue damage has yet been found. X-ray diffraction technique is not a new as the method of experimental study, but has often been adopted for direct and non-destructive observations of change in the local structures of crystalline materials at fundamental research. X-ray technique is one of the most powerful means to investigate the changes of microscopic- structure due to external forces, considering the fatigue phenomena occur on the surface of materials. Accordingly, one of the authors have studied the relations of half-value breadth of X-ray diffraction lines, residual stresses and hardness and number of cycles of fatigue stresses in detail for various sorts of engineering metallic materials. In the results of a number of experiments, it has been found that the variation in half-value breadth showed very regular relation with number of stress cycles, the authors have reported that the lifetime of materials in fatigue could be predicted. Consequently, it needs to investigate whether or not this predicting method is fitted for alloy containg α and β phase, moreover, it is interesting to make clear the fatigue mechanism of such materials which are present two phases having the different yield stress and type of crystal structure. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1966-03-31 |
| 巻 | 1巻 |
| 号 | 1号 |
| 開始ページ | 1 |
| 終了ページ | 12 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307488 |
| JaLCDOI | 10.18926/15480 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_25_1_1.pdf |
| 著者 | Gao Hong| 和田 力| 則次 俊郎| |
| 抄録 | How to reduce and simplify the calculation for image recognition is a very attractive and important issue in order to realize the real time control of a robot based on the image recognition results. This paper describes a method of extracting 2 - dimensional geometrical features of cubic objects based on the normal vector distributions from the visual information obtained with the laser range finder to reduce the calculation of the image recognition. In this research a laser beam is scanned in the horizontal plane to which the cubic objects stand vertically and the laser spot is detected with a TV camera every sampling time. These spots make an intermittent locus which includes some special lines corresponding to the cubic objects. To extract the features of the cubic objects, we utilize the normal vectors formed on the locus. If some normal vectors distribute in the same direction and the origin of the normal vectors are very close to their neighbor's, these normal vectors can be classified into the same class, -the straight line class. Because the normal vectors on the neighbor surfaces of the cubic objects are vertical to each other, we use this property to determine the pair of straight lines which belong to the cubic objects. Making the histogram based on the normal vectors with the same direction, we obtain the peaks which are supported by the points on the cubic object surfaces. Then, the points can be extracted from the set of points on the whole locus inversely according to the relations with the peaks and the features of the cubic object can be extracted by applying method of least square to these extracted points. The experiments proved the availability of the proposed processing algorithm. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1990-12-14 |
| 巻 | 25巻 |
| 号 | 1号 |
| 開始ページ | 1 |
| 終了ページ | 13 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002308010 |
| JaLCDOI | 10.18926/15466 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_24_1_1.pdf |
| 著者 | 吉田 彰| 大上 祐司| 藤井 正浩| |
| 抄録 | To clarify the effects of a drive system lubricant additive upon rolling fatigue of rollers manufactured from carburized and hardened steel, three types of oil were used as lubricants: one mineral base oil and the other two mineral base oils to which an S-P additive package and ATF additive package were added, respectively. These specimens were tested for sliding/rolling fatigue and examined for failure on the surface, rolling fatigue strength, and other properties. Roller surface temperatures and inter-roller frictional coefficients were found scarcely affected by the type of oil used. Irrespective of the difference in oil type, failure on the surface was found to be entirely spalling attributable to cracks generated in the subsurface. The depth at which spalling cracks had taken place was found nearly coincident with the depth at which a ratio of reversing orthogonal shear stress to hardness had amplitude A(Tyz/Hv) maximized. These depths were larger as Hertz stress became more prominent. Nevertheless, they were found hardly affected by the type of oil. Although rolling fatigue strength did not show a significant difference dependent upon the type of oil, it may be said that fatigue life would be somewhat negatively affected by an extreme pressure coated film with a content of sulfur and phosphorus. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1989-11-29 |
| 巻 | 24巻 |
| 号 | 1号 |
| 開始ページ | 1 |
| 終了ページ | 12 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307588 |
| JaLCDOI | 10.18926/15455 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_23_1_1.pdf |
| 著者 | 松田 正明| 大崎 紘一| |
| 抄録 | Display equipment has been used as communication media in the factory, office, and home. In order to communicate effectively, it is necessary to clarify the characteristics of eye movement in the case of looking at the display. The development of Eye Camera enables us to measure eye movement during work, so that we can collect the many data of eye movement during work. In this study, we proposed a method to evaluate the visual work using the distribution of visual points in X and Y axis. The cumulative distribution is approximated by the logistic curve which shows the symmetry and kurtosis by the parameter. The proposed method was applied to the three typical display models, that is, the digital meter model, reading model, and game model. In the digital meter model, the visual points were distributed symmetrically along the meters, and the symmetry and kurtosis of the distribution varied by the arranged direction of the meter. In the reading model, the visual points were distributed nearly symmetrically and uniformly in each axis and they were moved around the character and line from the period of spectrum analysis. In the game model, the visual points moved according to the target and were distributed symmetrically in the Y axis. And whether the target moved vertically or horizontally, the kurtosis of the distribution became equal in each axis. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1988-11-22 |
| 巻 | 23巻 |
| 号 | 1号 |
| 開始ページ | 1 |
| 終了ページ | 12 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307354 |
| JaLCDOI | 10.18926/15446 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_22_1.pdf |
| 著者 | 岡 久雄| 山本 辰馬| |
| 抄録 | Biomechanical impedance is relatively small compared to industrial mechanical impedance. Thus it is difficult to measure it precisely. A biomechanical impedance measuring system was developed for portable use by means of random excitation. This system doesn't require a fixed body and vibrator supporting apparatus. In order to obtain an impedance spectrum, the FFT processing is performed using a personal computer. The spectra of the biomechanical impedance which is measured on body surfaces depend on body positions and can be roughly classified into three spectra patterns : soft, stiff and intermediate. During the measurement, the measuring conditions (preload, diameter of the vibrating tip etc.) influence the results. However, it became clear that the linearity of the biomechanical impedance was satisfied in the limited measuring conditions. Accordingly it is possible to standardize the impedance and to compare it with the results under different measuring conditions. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1988-03-31 |
| 巻 | 22巻 |
| 開始ページ | 1 |
| 終了ページ | 14 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307480 |
| JaLCDOI | 10.18926/15432 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_28_1_1.pdf |
| 著者 | 奈良 重俊| Miho Shigeru| 東辻 浩夫| |
| 抄録 | The structural stabilities of bulk Si, Ge, and GaAs are discussed based on the total energy evaluated by the summation of the band structure energy and the short-range repulsive potential between ions. The band structure energy is calculated by means of the simple tight-binding method. The tight-binding parameters are determined so as to fit to the results of a pseude potential calculation and Harrison's model is employed to include the influence of lattice deformation. The short-range-force is assumed to be of the exponential form and parameters are determined so as to reproduce an experimental value of bulk modulus. This treatment qualitatively well describes structural properties in spite of the simple computational procedure and roughly gives the known variation of the total energy for a <100> uniaxial strain. This method is able to be applied to an investigation of the structural stabilities of superlattices, for example, a strained layer superlattice consisting of hetero-semiconductors. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1993-11-30 |
| 巻 | 28巻 |
| 号 | 1号 |
| 開始ページ | 1 |
| 終了ページ | 25 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307238 |
| JaLCDOI | 10.18926/15425 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_26_2_1.pdf |
| 著者 | 稲葉 英男| 大竹 秀雄| 野津 滋| |
| 抄録 | Radiative characteristics of the frost layer melted by radiative heat are experimentally examined. A frost layer is heated from above by the radiative heat from a halogen lamp set. Thermal radiation of the lamp has the wavelength spectrum characteristics similar to those of the solar radiation. The effect of the environmental temperature upon the frost melting process is clarified in experiments. The optical characteristics of reflectivity, absorptivity and transmissivity of the frost layer during the melting of the frost layer are measured using special measuring instruments. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1992-03-28 |
| 巻 | 26巻 |
| 号 | 2号 |
| 開始ページ | 1 |
| 終了ページ | 16 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307428 |
| JaLCDOI | 10.18926/15399 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_27_2_1.pdf |
| 著者 | 梶原 康博| 大崎 紘一| |
| 抄録 | Precedence relation in assembly has been determined by experience only. Now, an expert system is developed for determining such precedence relation. The conjugate states of the units of a product are shown in face frames and unit frames following the frame model. Seven rules are formulated. They consider geometrical interference of units, and make the precedence relation enable operation time to be shorter, and the number of JIG and substandards to be smaller. These rules are programized by computer language(PROLOG). |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1993-03-25 |
| 巻 | 27巻 |
| 号 | 2号 |
| 開始ページ | 1 |
| 終了ページ | 9 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307210 |