検索条件

閉じる

検索結果 1995 件

著者 Yamaguchi Takashi| Ichimura Takumi| Kenneth J. Mackin|
発行日 2008-12-11
出版物タイトル Proceedings : Fourth International Workshop on Computational Intelligence & Applications
2008巻
1号
資料タイプ 会議発表論文
著者 Hasuike Takashi| Ishii Hiroaki|
発行日 2008-12
出版物タイトル Proceedings : Fourth International Workshop on Computational Intelligence & Applications
2008巻
1号
資料タイプ 会議発表論文
著者 Matsui Takeshi| Sakawa Masatoshi| Kato Kosuke| Matsumoto Koichi|
発行日 2008-12
出版物タイトル Proceedings : Fourth International Workshop on Computational Intelligence & Applications
2008巻
1号
資料タイプ 会議発表論文
著者 Hara Akira| Yamaguchi Tomohisa| Ichimura Takumi| Takahama Tetsuyuki|
発行日 2008-12
出版物タイトル Proceedings : Fourth International Workshop on Computational Intelligence & Applications
2008巻
1号
資料タイプ 会議発表論文
著者 Milan Vlach|
発行日 2008-12
出版物タイトル Proceedings : Fourth International Workshop on Computational Intelligence & Applications
2008巻
1号
資料タイプ 会議発表論文
著者 Nishizaki Ichiro|
発行日 2008-12
出版物タイトル Proceedings : Fourth International Workshop on Computational Intelligence & Applications
2008巻
1号
資料タイプ 会議発表論文
著者 井原 敬子|
発行日 1991
出版物タイトル 岡山医学会雑誌
103巻
4号
資料タイプ 学術雑誌論文
著者 岡山大学農学部|
発行日 2009-02
出版物タイトル 岡山大学農学部学術報告
98巻
1号
資料タイプ その他
JaLCDOI 10.18926/14407
タイトル(別表記) PROPOSAL OF ARITHMETIC LESSON MODEL WITH ITS EMPHASIS ON PISA TYPE OF READINGABILITY
フルテキストURL 008_099_108.pdf
著者 延安 浩| 黒﨑 東洋郎|
抄録 PISA型読解力は良好とは言えない状況にある。PISA型読解力の育成は、算数教育においても喫緊の課題である。算数教育の中でPISA型読解力を育成するには、実現したい姿を具体的にイメージ化することが大切である。算数科でPISA型読解力が身についた姿をイメージ化することで、目標が明確になり、目標を達成する方策も具体的になると考える。それでは、読解力が身についた姿とはどのような姿だろうか。PISA型読解力の構成要素は、「理解」「熟考」「活用」である。「理解」とは、問題から必要な情報を取り出し、根拠を基に図・式・ことば等の数学的表現を用いて自分の考えを見出すことである。「熟考」とは、自分の考えを説明し、他者との話し合いの中で自己の考えを振り返ることである。「活用」とは、獲得した知識、技能、考え方を創造的・発展的に新たな学習や日常生活に生かすることである。以上のように考えて、PISA型読解力を育成する授業モデルを開発した。
キーワード PISA 型読解力( PISA type of reading ability) 理解 (understanding) 熟考 (reflection) 活用 (application)
出版物タイトル 岡山大学教育実践総合センター紀要
発行日 2008-03-10
8巻
1号
開始ページ 99
終了ページ 108
ISSN 1346-3705
言語 日本語
論文のバージョン publisher
NAID 120002308365
JaLCDOI 10.18926/14380
タイトル(別表記) A Study of an Effective Teaching Procedure to Pupils' Self-Thinking and Self-Actuating Attitudes
フルテキストURL 007_093_104.pdf
著者 河村 啓司| 黒﨑 東洋郎|
抄録 創造の原動力となる思考力を育てることは喫緊の課題である。算数科で思考力を育成することは、数学的な考え方を育成することである。数学的な考え方は、児童自らが数量や図形に算数的活動を通して関わり、試行錯誤的に考える中で育成されるものと考えられる。本研究は、算数科第4学年「小数」の単元で、自ら考え、活用する力を育てる効果的な指導方法について授業実践を通して実証的に研究する。そのため、まず、「小数」の単元の指導目標を分析し、思考力としての「数学的な考え方」を明らかにする。次に、「数学的な考え方」を伸ばすために効果的な指導方略として「算数的活動」の最適化を検討する。最後に、それぞれの場面での児童の「数学的な考え方」を見取るために指標を基に、「つくる」「活用する」場の比較を通して、児童の「数学的な考え方」がどのように伸びたかを評価し、指導方略の効果を検証する。
キーワード 思考力 (thinking faculty) 数学的な考え方 (mathematical way of thinking) 算数的活動 (mathematical activities)
出版物タイトル 岡山大学教育実践総合センター紀要
発行日 2007-03-10
7巻
1号
開始ページ 93
終了ページ 104
ISSN 1346-3705
言語 日本語
論文のバージョン publisher
NAID 120002308451
JaLCDOI 10.18926/14352
タイトル(別表記) 環境教育に関する生徒の知識、意識、関心に関する調査研究―日本の普通科高校を例として―
フルテキストURL 006_021_032.pdf
著者 アグベコ ジュリオス コフィ| 那須 悦代| 笠井 智美| 渡辺 敏夫| 枝川 和子| 喜多 雅一|
抄録 Education for Sustainable Development(ESD)-Environmental Education, has been a major concern at most UN summits. The 2002 Johannesburg Summit broadened the vision and re-affirmed the objective of the Millennium evelopment Goals (MDS) and proclaimed the Decade of Education for Sustainable Development for the period 2005-2014. This emphasized that education, is critical for promoting sustainable development and improving capacity of the people to address environment and development issues. This paper seeks to report, a finding on the level of student awareness and interests in environmental issues at a High School in Japan (a Super Science High School). A curricula unit was developed in the area of environmental education on soil. An actual chemistry class has been conducted in English. Pre & post lesson questionnaires were administered to the students. The result of the analysis indicates that, students are aware of environmental issues but need to be exposed to these issues in the form of activity-based classroom lessons. This we believe, will enable the students appreciate the fact that ESD is a life-wide and lifelong endeavor which challenges individuals, institutions and societies to view tomorrow as a day that belongs to all of us. This we presume is the main challenge of the MDS.
キーワード Environmental Education (環境教育) Awareness (意識) Students' interest (関心) Curriculum (環境教育カリキュラム) Soil
出版物タイトル 岡山大学教育実践総合センター紀要
発行日 2006-03-25
6巻
1号
開始ページ 21
終了ページ 32
ISSN 1346-3705
言語 英語
論文のバージョン publisher
NAID 120002308079
JaLCDOI 10.18926/14350
タイトル(別表記) 高校段階への科学教材の開発:カンボジアにおける洗剤に関する研究授業の実践
フルテキストURL 006_011_020.pdf
著者 セット セング| 三好 美恵| 喜多 雅一|
抄録 A study lesson dealing with the detergent concept was carried out at an upper secondary school in Cambodia after a number of teaching materials concerning with detergent were prepared for classroom activities. Through the pre-/post tests and questionnaires responded by students, the lesson study was evluated high appreciation and satisfactory. The activities prepared in the lesson study were applicable by students. It is also recommended that it can be appropriately introduced as part of curriculum at upper secondary schools in Cambodia and other developing countries which required teaching materials.
キーワード detergent(洗剤) volume of water drop(水滴の体積) surface tension of water(表面張力) knowledge improvement of students(生徒の知識改善) Cambodia(カンボジア)
出版物タイトル 岡山大学教育実践総合センター紀要
発行日 2006-03-25
6巻
1号
開始ページ 11
終了ページ 20
ISSN 1346-3705
言語 英語
論文のバージョン publisher
NAID 120002308221
JaLCDOI 10.18926/14157
フルテキストURL Mem_Fac_Eng_39_1_82.pdf
著者 Wang, Feng| Nogami, Yasuyuki| Morikawa, Yoshitaka|
抄録 In this paper, we focus on developing a high-speed square root (SQRT) algorithm required for an elliptic curve cryptosystem. Examining Smart algorithm, the previously well-known SQRT algorithm, we can see that there is a lot of computation overlap in Smart algorithm and the quadratic residue (QR) test, which must be implemented prior to a SQRT computation. It makes Smart algorithm inefficient. The essence of our proposition is thus to present a new QR test and an efficient SQRT algorithm to avoid all the overlapping computations. The authors devised a SQRT algorithm for which most of the data required have been computed in the proposed QR test. Not only there is no computation overlap in the proposed algorithm and the proposed QR test, but also in the proposed algorithm over GF(p(2)) (4 | p − 1) some computations can be executed in GF(p); whereas in Smart algorithm over GF(p(2)) all the computations must be executed in GF(p(2)). These yield many reductions in the computational time and complexity. We implemented the two QR tests and the two SQRT algorithms over GF(pm) (m=1, 2) in C++ language with NTL (Number Theory Library) on Pentium4 (2.6GHz), where the size of p is around 160 bits. The computer simulations showed that the proposed QR test and the proposed algorithm over GF(p(m)) were about 2 times faster than the conventional QR test and Smart algorithm over GF(p(m)).
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2005-01
39巻
1号
開始ページ 82
終了ページ 92
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002308422
JaLCDOI 10.18926/14156
フルテキストURL Mem_Fac_Eng_39_1_71.pdf
著者 Nogami, Yasuyuki| Morikawa, Yoshitaka|
抄録 This paper proposes an algorithm for generating prime order elliptic curves over extension field whose extension degree is a power of 2. The proposed algorithm is based on the fact that the order of the twisted elliptic curve is able to be a prime number when the extension degree for the twist operation is a power of 2. When the definition field is F(2(40)−87)(4) , the proposed algorithm can generate a prime order elliptic curve within 5 seconds on PentiumIII (800MHz) with C language.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2005-01
39巻
1号
開始ページ 71
終了ページ 81
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002308036
JaLCDOI 10.18926/14155
フルテキストURL Mem_Fac_Eng_39_1_63.pdf
著者 金谷 健一|
抄録 Geometric fitting is one of the most fundamental problems of computer vision. In [8], the author derived a theoretical accuracy bound (KCR lower bound) for geometric fitting in general and proved that maximum likelihood (ML) estimation is statistically optimal. Recently, Chernov and Lesort [3] proved a similar result, using a weaker assumption. In this paper, we compare their formulation with the author’s and describe the background of the problem. We also review recent topics including semiparametric models and discuss remaining issues.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2005-01
39巻
1号
開始ページ 63
終了ページ 70
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002308366
JaLCDOI 10.18926/14149
フルテキストURL Mem_Fac_Eng_39_1_40.pdf
著者 Al-Sehaim, Sulaiman| 小西 正躬| 能勢 和夫|
抄録 In this paper, two problems, plant allocation problem and that of transfer routing from plants to customers, are considered simultaneously. Especially, adaptation scheme for emergency cases are checked. To solve these problems, decentralized agent based optimization procedures are used. In our study, oil production and products transfer in Saudi Arabia are treated. Through numerical experiments, practicability of the proposed method is verified.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2005-01
39巻
1号
開始ページ 40
終了ページ 45
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002308505
JaLCDOI 10.18926/14148
フルテキストURL Mem_Fac_Eng_39_1_28.pdf
著者 石丸 和史| 小西 正躬| 今井 純| 西 竜志|
抄録 In reactor furnace, due to high temperature and high pressure, data can be measured only near the furnace wall. In this paper, the way to estimate temperature distribution in a reactor furnace using measured data near the furnace walls and to control temperature distribution to the desired temperature distribution was studied. In the estimation, SQP method is employed using measured data near the furnace walls. As the result, the whole temperature distribution in a furnace could be obtained from such limited data. Furthermore, to control the temperature distribution in a reactor furnace, gas flow from multiple tuyeres and supplying material for controlling temperature distribution in a reactor furnace were determined by the SQP method. It was shown that temperature distribution in a furnace was regulated to achieve various desired distribution. Thus, it was verified that complicated temperature distribution in a reactor furnace could be controlled by combining furnace simulation and SQP method.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2005-01
39巻
1号
開始ページ 28
終了ページ 39
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002308270
JaLCDOI 10.18926/14126
フルテキストURL Mem_Fac_Eng_OU_40_1_84.pdf
著者 Nogami, Yasuyuki| Morikawa, Yoshitaka|
抄録 This paper particularly deals with elliptic curves in the form of E(x, y) = y(2) − x(3) −b = 0, b ∈ F(* q) , where 3 divides q−1. In this paper, we refer to the well-known twist technique as x-twist and propose y-twist. By combining x-twist and y-twist, we can consider six elliptic curves and this paper proposes a method to obtain the orders of these six curves by counting only one order among the six curves.
キーワード elliptic curve twist third power residue/non-residue
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 83
終了ページ 94
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002308548
JaLCDOI 10.18926/14098
フルテキストURL Mem_Fac_Eng_OU_40_1_16.pdf
著者 阿部 快洋| 小西 正躬| 西 竜志| 今井 純|
抄録 In this study, auto tuning of PID control gains in hot strip looper controller is made based on RNN model. Neuro emulator is employed to model the characteristics of looper dynamics. Combining neuro emulator and RNN model, auto tuning system of PID control gains is constructed. As the inputs to RNN, plural evaluation functions which reflect individual preference of human experts. Further, Self learning mechamism is embeded to RNN model which enables adaptation to the change in rolling chracteristics. Through numerical experiments, the effect of the proposed method is ascertained.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 16
終了ページ 22
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002308615
JaLCDOI 10.18926/14097
フルテキストURL Mem_Fac_Eng_OU_40_1_9.pdf
著者 貫名 高史| 小西 正躬| 西 竜志| 今井 純|
抄録 Controls of the temperature, pressure and flowing quantity are important for the stable operation of the product quality in the distillation tower. The usual measuring way of product quality estimation is made by the off-line analysis. In this paper, online estimation method of product quality is studied for improving the product quality. The estimation method based on stochastic analysis was developed for online estimation. In this paper, the data of temperature, pressure and flow volum in the distillation tower are treated. As the estimation models, RNN (Recurrent Neural Net Work) and PLS (Partial Least Square Regression Method) were adopted. The actual plant data were used in the analysis. Both PLS and RNN models could compensate each other to improve the accuracy in estimation.
出版物タイトル Memoirs of the Faculty of Engineering, Okayama University
発行日 2006-01
40巻
1号
開始ページ 9
終了ページ 15
ISSN 0475-0071
言語 英語
論文のバージョン publisher
NAID 120002308095