検索結果 9827 件
| JaLCDOI | 10.18926/15723 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_13_195.pdf |
| 著者 | Sano, Hiroya| 古賀 隆治| Tanada Yoshihiro| Kosaka, Megumi| |
| 抄録 | The maximally attainable accuracy of an airpollution monitoring system is investigated. The system is composed of a tunable pulsed dye laser as the light source, photodiodes as the opto-electric converter and a low noise electronic signal processor specifically designed by the authors. The extreme value of the accuracy is given in terms of the standard deviation of the attenuation. The value is 3.4×10(-4)[Nep√(pulse number)] for an averaged value for multiple laser shots. Also the wavelength reproduceability of a dye laser was examined, which resulted in that a computer should take a part in the wavelength control in order that this method should be feasible. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1979-03-05 |
| 巻 | 13巻 |
| 開始ページ | 195 |
| 終了ページ | 207 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307857 |
| JaLCDOI | 10.18926/15712 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_13_119.pdf |
| 著者 | Ohta, Mutsuo| Yamada, Masuo| Kanadani, Teruto| 榊原 精| |
| 抄録 | The effects of the fluctuation of solute concentration on the process of aging in Al-10wt % Zn alloy were studied by measurements of the intensity of small-angle X-ray scattering and by electron microscopy. Specimen was quenched from a higher temperature(T(Ql), mainly 300℃) to an intermediate temperature (T(Q2), 110~230℃), held there for a time, quenched again into iced water and aged isothermally at 0℃ or 40℃. Results obtained are as follows: (1) When the specimen was held at T(Q2) for a sufficient time and aged at relatively high temperatue(e.g. Ihr at 125℃ and aged at 40℃), a two-step increasing of both resistivity and integrated intensity was found. (2) Each of the steps has characteristics of the formation of G.P. zones by the spinodal decomposition. (3) When the maximum resistivity(p(max)) takes a minimum, Size distribution of the G.P. zones, estimated from the difference between Guinier and Porod radii, is much broader than that at p(max) in the usual direct quenching. (4) When the holding time at T(Q2) is long enough, the size distribution at p(max) is as broad as that at p(max) in the usual case. (5) After a prolonged aging under the condition that P(max) takes minimum, G.P. zones grow markedly and become oblate ellipsoidal with a major axis of about 20nm. (6) These results are consistently understood in terms of the fluctuation of solute concentration at T(Q2) and the change in the concentration of vacancies during annealing at T(Q2). That is, it is considered that these results are due to the difference in aging behavior between the regions of relatively high concentration and the ones of low concentration induced by the fluctuation. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1979-03-05 |
| 巻 | 13巻 |
| 開始ページ | 119 |
| 終了ページ | 132 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307931 |
| JaLCDOI | 10.18926/15697 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_5_61.pdf |
| 著者 | Misaki Takayoshi| Okamoto Takuji| Yamamoto Hideki| |
| 抄録 | An asynchronous delay line for PAM signal having controlled delay capability is proposed. The delay line in a cascaded chain of identical memory cells. Each sample of the sequence of the input PAM signals passes or is shifted in particular cell depending on whether the succeeding cell is empty or not. A cell is composed of two memory capacitors with the peripheral control circuits. In this paper, especially, an example of the circuit for cell is shown and its several characteristics are discussed. At the end, some experimental results are given. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1970-09-01 |
| 巻 | 5巻 |
| 号 | 1号 |
| 開始ページ | 61 |
| 終了ページ | 66 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307866 |
| JaLCDOI | 10.18926/15695 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_2_113.pdf |
| 著者 | Kono Ichiro| Sellmeijer J.B.| |
| 抄録 | This paper deals with the groundwater flow in a semi-confined aquifer causing the phenomena of consolidation and free surface lowering. Since the main effect of consolidation has taken place before noticeable lowering of the free surface, one may solve each phenomenon on its own. The real solution may be obtained by the principle of superposition. However, the solution for lowering the free surface is delayed due to the cosolidation by a certain timelapse, depending on the placecoordinates. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1976-01-27 |
| 巻 | 10巻 |
| 号 | 2号 |
| 開始ページ | 113 |
| 終了ページ | 136 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307163 |
| JaLCDOI | 10.18926/15693 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_2_81.pdf |
| 著者 | 榊原 精| |
| 抄録 | To acquire information on the interaction between oxygen molecules in solid phase, studies have been carried out on the magnetic properties of solid oxygen, oxygen-argon and oxygen-fluorine. Review of the studies on the interaction between oxygen molecules is cited. Magnetic susceptibility was measured by the Faraday method as a function of temperature from 12 K to the melting point of them. Pure oxygen both in α and β phase indicates paramagnetism corresponding to long-range antiferromagnetic order. Oxygen -argon mixtures of 92~66 mol% oxygen content indicate large susceptibility corresponding to δ phase, which can be interpreted in terms of the cluster of oxygen molecules in trimer. Small paramagnetism was found for the oxygenfluorine mixture even as dilute as 10 mol% oxygen content, which may be due to the strong antiferromagnetic interaction. This can be interpreted in terms of super-exchange interaction between oxygen molecules via fluorine molecule. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1976-01-27 |
| 巻 | 10巻 |
| 号 | 2号 |
| 開始ページ | 81 |
| 終了ページ | 111 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307359 |
| JaLCDOI | 10.18926/15692 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_2_63.pdf |
| 著者 | Fujiwara Yutaka| Osaki Hirokazu| Kikuchi Susumu| |
| 抄録 | We tried to look at the allocation techniques in plant layout from the point of view of decision making theory. And it was made clear that Laplace, Minimax and Hurwicz princilpe can be applied to the allocation techniques. The techniques based on these principles were called Laplace method, Minimax method and Hurwicz method. In this paper algorithms and computer programs of these methods were described in order to solve the layout problems effectively. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1976-01-27 |
| 巻 | 10巻 |
| 号 | 2号 |
| 開始ページ | 63 |
| 終了ページ | 80 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307132 |
| JaLCDOI | 10.18926/15691 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_5_47.pdf |
| 著者 | Takahashi Katsuaki| Miura Yoshinari| |
| 抄録 | Diffusion phenomena of silver ion in the molten sodium diborate of low silver ion content were investigated at the temperature range from 880℃ to 625℃ by means of chronopotentiometry. From the results, it was shown that the silver ion was reduced reversibly to metallic state at the silver electrode used and silver ion was transported only by diffusion in case that transition time in a potential-time relation was within several seconds. Diffusion coefficients measured at various temperatures satisfied Arrhenius equation. The activation energy of diffusion and diffusion coefficient were respectively 32Kcal/mol and 6.5×10(-7) cm(2)/sec at the liquidous temperature. By comparing these values with those obtained in some molten salts, the difference of structure between the molten glass and molten salts was discussed. Moreover, the consideration for the size of borate anion existing in the molten glass was also tried from the viewpoint of rate process and from Stokes-Einstein's equation. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1970-09-01 |
| 巻 | 5巻 |
| 号 | 1号 |
| 開始ページ | 47 |
| 終了ページ | 53 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307810 |
| JaLCDOI | 10.18926/15690 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_2_55.pdf |
| 著者 | Nakata Takayoshi| Ishihara Yoshiyuki| Matsubara Kazunori| Nakano Masanori| |
| 抄録 | A new method have been developed based upon analogue-to-digital conversion techniques and memories. The method involves the scaling of operating frequency from "real" to "optimum" for the power loss measurement. The advantages of using this techniques are as follows: (1) extreme availability at lower frequency region, (2) high accuracy and high stability, (3) simple measuring procedure, (4) digital indication. This method can be measured the power losses over the frequency range 0.1Hz to 1kHz for magnetic circuit and d.c. to 1kHz in such a purely resistive circuit. We estimate the accuracy of this core loss measuring system within 1.0% over all these frequency range. Using this system, specific core losses of the various grades of silicon iron have been measured in the frequency range 0.1Hz to 200Hz. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1976-01-27 |
| 巻 | 10巻 |
| 号 | 2号 |
| 開始ページ | 55 |
| 終了ページ | 61 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307969 |
| JaLCDOI | 10.18926/15688 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_2_45.pdf |
| 著者 | Himei Toyoji| Nakanishi Senichiro| Komatubara Hitoshi| Kawata Sigeo| Onishi Fujio| Tabuchi Takashi| |
| 抄録 | When a transformer is energized, the inrush of abnormally high magnetizing current may be noted for a short time until normal flux conditions are established. This may cause the failure of a protective relay, so many preventives are usually accepted for the purpose of normal relay performance. The authors, instead, now have tried to control the inrush current itself, by means of the soft starting method using two reverse parallel thyristors. In this paper, the method to control the inrush current itself, is presented by the soft-starting method using thyristors. The experimental results of this Method verifies the good controlability of the transient magnetic flux of a transformer and then the availability of the control of magnetizing inrush current in the cases of a single phase connection and a three phase one. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1976-01-27 |
| 巻 | 10巻 |
| 号 | 2号 |
| 開始ページ | 45 |
| 終了ページ | 54 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307871 |
| JaLCDOI | 10.18926/15685 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_2_25.pdf |
| 著者 | Torii, Sigeru| Tanaka, Hideo| |
| 抄録 | Ethyl dl-jasmonate (1a) and ethyl dl-2-epi-jasmonate (1b), novel constitutents in jasmin absolute from Italian Jasminum grandiflorum L, were prepared from 8-endo-(2'-cis-pentenyl)-3-oxo-2-oxa-bicyclo [3.2.1] octane, jasmine acid δ-lactone(2). Improvement of the preparation of the intermediate (9), a key precursor of (2), was made by different route via lactonization of (7) and/or (8). NMR and IR spectra (la) and (1b) are given. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1976-01-27 |
| 巻 | 10巻 |
| 号 | 2号 |
| 開始ページ | 25 |
| 終了ページ | 30 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307609 |
| JaLCDOI | 10.18926/15684 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_2_15.pdf |
| 著者 | Shimamoto Yuzuru| Tanaka Yutaka| |
| 抄録 | Results of calculations and experiments on the cold co-axial flow presented in this paper are summalized as follows ; (1) A theoretical expression method for co-axial flow field of two dimension is investigated to estimate more exactly the flow profile and the velocity gradient. (2) Measurements of mixing length were carried out for the confined co-axial jet flow. On the basis of measured data, inquiry is made for the propriety of the assumption proposed in the previous paper (1) that the mixing length may be expressed as a function of the minimum distance to the nearby wall. (3) Experimental inquiry was also done on the corelation between Lagrangian length scale and the mixing length. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1976-01-27 |
| 巻 | 10巻 |
| 号 | 2号 |
| 開始ページ | 15 |
| 終了ページ | 24 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307794 |
| JaLCDOI | 10.18926/15681 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_2_1.pdf |
| 著者 | Honda Kazuo| Hosokawa Norio| Sarai Takaaki| |
| 抄録 | The diffracted intensity of X-ray depends upon several physical and geometrical factors such as structure, multiplicity, absorption and Lorentzpolarization and measuring conditions such as time constant and scanning speed of detector on counter method[l]. For analyzing on the X-ray stress measurement, especially, profile shape of X-ray diffraction which is affected by geometrical factors such as absorption and Lorentz-polarization is very important. In order to eliminate these factors affecting the stress measured by using X-ray, the correcting factors were introduced and those theoretical values were calculated. After this theoretical calculation, it is found that as the half value breadth increases the difference between the stress measured by using X-ray and the corrected one becomes larger and larger under same measuring condition. When the ideal diffracted intensity of X-ray is assumed Cauchy distribution the measured stress depends upon measuring condition for same specimen, but it is independent of measuring condition in Gauss, distribution. Consequently, it is found that the stress measured by using X-ray must be corrected under each measuring condition and the method of correction is made clear and proved experimentally in this paper. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1976-01-27 |
| 巻 | 10巻 |
| 号 | 2号 |
| 開始ページ | 1 |
| 終了ページ | 13 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307339 |
| JaLCDOI | 10.18926/15679 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_1_49.pdf |
| 著者 | Ohta, Mutsuo| Kawazoe, Hisami| 榊原 精| |
| 抄録 | Binding energy between a vacancy and a Zn atom in Al was investigated by measurement of as-quenched resistivity in Al-0.021at % Zn and pure-Al, with the estimation of vacancy loss during quenching. The contribution of clusters to resistivity in Al-0.021at % Zn waa also investigated. Their results are summarized as follows: (1) The results of isothermal and isochronal annealing indicate that clusters in Al-0.021at % Zn cnuld not be detected beyond the experimental errors. (2) The model applied to estimate the vacancy loss in pure-Al has enough validity. The quantitative estimation of clusters ana the improvement in experimental conditions are greatly desired, which enable the more detailed, analysis of the data. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1975-07-01 |
| 巻 | 10巻 |
| 号 | 1号 |
| 開始ページ | 49 |
| 終了ページ | 59 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307807 |
| JaLCDOI | 10.18926/15678 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_1_39.pdf |
| 著者 | Ohta Mutsuo| Hamamoto Takao| |
| 抄録 | As to Al-Zn alloy, the difference between the formation of G.P.zones and that of clusters was investigated by measurements of electrical resistivity. The results obtained were summarised as follows: (1) G.P.zones formed during the quench and quenched-in vacancies increase greatly as-quenched resistivity P(o) as quenching temperature Tq is raised, and clusters increase slightly P(o) as Tq is lowered. (2) For one Tq and one Ta, the time required to reach P(e)' for Al-1.3at % Zn alloy is longer than that for Al-3.0at % Zn alloy. This is due to the difference of number of zinc atom in the clusters. (3) For one Ta and one concentration of zinc, the time required to reach p'(e) at Tq = 170℃ is longer than that at Tq = 300℃. This is due to the difference in concentration of quenchedin vacancies. As to Al-Cu alloy, the solvus temperature for G.P.zones was determined from the existence of P(m) in ageing curves by measurements of electrical resistivity. Consequently the solvus temperature is between 20℃ and 60℃. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1975-07-01 |
| 巻 | 10巻 |
| 号 | 1号 |
| 開始ページ | 39 |
| 終了ページ | 47 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307266 |
| JaLCDOI | 10.18926/15676 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_1_17.pdf |
| 著者 | Osaki Hirokazu| Kikuchi Susumu| |
| 抄録 | In multivariate analysis, the linear discriminant analysis and the test for differences between mean values of two populations are of wide application. It is not essential to increase the variables only in order to increase the degree of accuracy of discrimination or test without evaluating the effect of variables. Therefore the computer program of selection procedures of variables in these two methods is mentioned in this paper. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1975-07-01 |
| 巻 | 10巻 |
| 号 | 1号 |
| 開始ページ | 17 |
| 終了ページ | 37 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307596 |
| JaLCDOI | 10.18926/15674 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_10_1_1.pdf |
| 著者 | Nakajima Toshikatsu| Nakagawa Heisaburo| |
| 抄録 | This paper describes the basic boundary conditions in angular grinding, which is widely applied as a high efficiency machining and where a complicated-shaped workpiece is ground at the same time. The angular grinding is first classified into three basic types, an external, a surface and an internal angular grinding, depending on the axis angle between the wheel and the work axes. The undeformed chip shape, which is characterized by the interference angle, the maximum chip thicknes and the chip length, is then analyzed in each type of angular grinding. The effects of grinding conditions such as the axis angle, the speed ratio, the radius ratio and the successive cutting edge spacing upon the geometry of undeformed chip are discussed to make clear the relations between the basic boundary conditions and the working conditions in angular grinding. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1975-07-01 |
| 巻 | 10巻 |
| 号 | 1号 |
| 開始ページ | 1 |
| 終了ページ | 16 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307122 |
| JaLCDOI | 10.18926/15673 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_4_57.pdf |
| 著者 | Takahashi Teruo| Kitamura Yoshiro| |
| 抄録 | Although the stability of Newtonian liquid jet has been investigated experimentally and theoretically, many problems has remained unsolved. Especially, the stability of liquid jets in immiscible liquid systems has been little studied. Furthermore, one has to point out that the stability of jets may be influenced by the turbulence in the nozzle and the velocity profile. This work presents the experimental result about the effect of the nozzle length on the breakup length of liquid jets in the air and in the immiscible liquid, as the beginning of a systematic investigation of the influence by these factors on the breakup of jet. The dependence of the initial amplitude of surface disturbances on the nozzle geometry is presented for evaluating the effect of the nozzle length on the breakup length of laminar liquid jet in the air and in the immiscible liquid. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1969-09-01 |
| 巻 | 4巻 |
| 号 | 1号 |
| 開始ページ | 57 |
| 終了ページ | 64 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307482 |
| JaLCDOI | 10.18926/15654 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_7_2_89.pdf |
| 著者 | Nakata Takayoshi| Ishihara Yoshiyuki| Morimoto Hideki| |
| 抄録 | This paper deals with the magnetic characteristics (the flux distributions, core losses, etc.) of threephase core-type transformers with double-layer. In the preceding report, only linear solutions have been given. In this paper, also non-linear solutions are discussed. Therefore, the flux waves of each magnetic path are distorted and contain various harmonics. When core losses are calculated, the hysteresis losses of minor loops are taken account. The results of analysis are compared with those of experiments. It is concluded that the principal cause for increasing core losses of this type core is the eddy current loss produced by harmonic fluxes. The flux distributions and the core losses depend on the shapes of the magnetization curve and the core-loss curve, that is, on the quality of the materials. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1972-10-13 |
| 巻 | 7巻 |
| 号 | 2号 |
| 開始ページ | 89 |
| 終了ページ | 100 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307260 |
| JaLCDOI | 10.18926/15653 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_7_2_85.pdf |
| 著者 | Nakata Takayoshi| Ishihara Yoshiyuki| |
| 抄録 | A new method for representing distorted wave forms is investigated. The method suggested by us is a modified vector symbolic method. It has been hitherto thought that the vector symbolic method cannot be applied to the distorted waves, because the rotating speeds of each harmonic vector are not identical. Representing the argument of the n-th harmonic vector by l/n times as large as the phase angle of the harmonic component, the relative positions of respective harmonic vectors are invariable wherever the standard vector is put, and the wave shape can be deduced from the vector diagram. We found various correspondences between the wave forms and the vector diagrams. Therefore, the wave shape can be estimated from the vector diagram, and the mutual relationships between two wave forms can also be known. In electric or magnetic circuits, the causes of distorted wave forms are in general obvious. Therefore, there are very often the fixed relationships between the amplitudes and phase angles of the harmonics. Further, in polyphase a.c. circuits, there are often the fixed relationships between corresponding harmonics in the wave forms of the respective phases. When the wave forms of those circuits are discussed, the new method investigated in this paper may offer a useful key. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1972-10-13 |
| 巻 | 7巻 |
| 号 | 2号 |
| 開始ページ | 85 |
| 終了ページ | 88 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307535 |
| JaLCDOI | 10.18926/15650 |
|---|---|
| フルテキストURL | Mem_Sch_Eng_OU_7_2_49.pdf |
| 著者 | Hosokawa Norio| Kodera Yoichi| |
| 抄録 | This paper deals with the stress-strain curves of single crystal and polycrystal considering the workhardening and the anisotropy which is due to the difference of workhardening on each slip system. The results obtained are summarized as follows: 1) The equations of workhardening on each slip system are derived according to the dislocation theory. 2) And it is found that the stress-strain curves of Cu single crystal and polycrystal calculated by using the workhardening equation with proper coefficients agree well with the experimental values. |
| 出版物タイトル | Memoirs of the School of Engineering, Okayama University |
| 発行日 | 1972-10-13 |
| 巻 | 7巻 |
| 号 | 2号 |
| 開始ページ | 49 |
| 終了ページ | 60 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307885 |