Electric Power Generation of PZT Piezoelectric Ceramics Using Both Direct and Inverse Piezoelectric Effects

The power generation characteristics of lead zirconate titanate (PZT) piezoelectric ceramics (E-PZT) were experimentally investigated using a specialized PZT system which utilizes both the direct and inverse piezoelectric effects inherent to PZT materials. Specifically, electric voltage was generated from the vibration of E-PZT through the inverse piezoelectric effect, induced by mechanical energy transferred from the vibration of a PZT piezoelectric ceramic plate, such as a buzzer (B-PZT). In this system, an insulating material was placed between the B-PZT and E-PZT plates to address the electrical conductivity of the PZT ceramic. Various insulating materials with different thicknesses and different hardness were prepared. Additionally, the PZT systems were mounted in several distinct configurations to evaluate their power generation performance: a fully fixed around the PZT plate and a free-hanging setup. The influence of insulation materials and mounting conditions on electrical output was analyzed at various loading conditions, e.g., loading value and frequency. The results demonstrated that the generated electric voltage decreased with increasing insulation thickness and hardness, suggesting that thinner and softer insulating materials enhance output voltage. Conversely, when the PZT system was securely fixed around the PZT plate with an appropriate fixture, a higher and more stable electric voltage was generated. The voltage generated also varied by the loading condition, which is related to the strain value of the E-PZT plate, demonstrating a linear relationship between the strain and the output voltage. Notably, the strain was significantly influenced by resonant frequencies, which played a crucial role in achieving higher voltage outputs. Based on these experimental results, two power generation systems have been proposed.

This version of the article has been accepted for publication, after peer review (when applicable) and is subject to Springer Nature’s AM terms of use, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: http://dx.doi.org/10.1007/s11664-025-11960-1

This fulltext file will be available in Apr. 2026.