| JaLCDOI | 10.18926/15406 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_27_2_59.pdf |
| 著者 | Prokop Jiri| Myojin Sho| |
| 抄録 | The paper presents methods for simulation and examination of the performance of a classification yard, including both manual and computer-aided methods. Presented methods are applicable to the simulation and examination of full range of yards of different types and sizes including manually operated as well as highly automated classification yards. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1993-03-25 |
| 巻 | 27巻 |
| 号 | 2号 |
| 開始ページ | 59 |
| 終了ページ | 71 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307384 |
| JaLCDOI | 10.18926/15404 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_27_2_41.pdf |
| 著者 | Prokop Jiri| Myojin Sho| |
| 抄録 | The fundamental objective of this paper is to aggregate and establish a set of practical principles, guidelines, and procedures to clarify and improve classification yard design and to enhance the efficiency of the design process. The paper primarily addresses theoretical and technical aspects of hump yard height and grade design, placement of the switches and the retarders. It attempts to compile and document yard design procedures, based on the Theory of Energy Head and Energy Loss. This procedures are applicable to the design of new yards, rehabilitation of the existing yards of different types and sizes including manually operated as well as highly automated classification yards. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1993-03-25 |
| 巻 | 27巻 |
| 号 | 2号 |
| 開始ページ | 41 |
| 終了ページ | 58 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307241 |
| JaLCDOI | 10.18926/15403 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_27_2_19.pdf |
| 著者 | 奈良 重俊| 東辻 浩夫| |
| 抄録 | Numerical simulations of a single layer recurrent neural network model in which the synaptic connection matrix is formed by summing cyclic products of succesive patterns show that complex dynamics can occur with the reduction of a connectivity parameter which is the number of connection between neurons. The structure in these dynamics is discussed from the viewpoint of realizing complex function using complex dynamics. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1993-03-25 |
| 巻 | 27巻 |
| 号 | 2号 |
| 開始ページ | 19 |
| 終了ページ | 40 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307451 |
| JaLCDOI | 10.18926/15400 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_27_2_11.pdf |
| 著者 | 岡 久雄| 山本 辰馬| Saratani Keiji| Tanaka Masahiro| Kawazoe Takayoshi| |
| 抄録 | The use of dental implants has increased together with increases in the human life span and it has become an imperative subject for dentists to familiarize themselves with this treatment modality. Unfortunately, there has been no practical and quantitative method for in vivo evaluation of the stability of dental implants. In the tooth mobility examination, the tactile sense of natural teeth is different from that of dental implants. The authors have developed an automatic diagnosis system of tooth mobility for clinical use. The biomechanical mobility of peri-implantium is measured with a pseudo-random vibration, from which the viscoelasticity c1, c2, k of peri-implantium is obtained. The diagnosis system has been applied to the quantitative evaluation of the stability of implants : endodontics endosseous implants (titanium pin), endosseous implants (Bioceram). It has also been applied to the evaluation of the long-term prognoses of dental implantation (Bioceram) and the examination of Intramobile implant (IMZ), and the satisfactory results have been obtained. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1993-03-25 |
| 巻 | 27巻 |
| 号 | 2号 |
| 開始ページ | 11 |
| 終了ページ | 17 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002308018 |
| JaLCDOI | 10.18926/15399 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_27_2_1.pdf |
| 著者 | 梶原 康博| 大崎 紘一| |
| 抄録 | Precedence relation in assembly has been determined by experience only. Now, an expert system is developed for determining such precedence relation. The conjugate states of the units of a product are shown in face frames and unit frames following the frame model. Seven rules are formulated. They consider geometrical interference of units, and make the precedence relation enable operation time to be shorter, and the number of JIG and substandards to be smaller. These rules are programized by computer language(PROLOG). |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1993-03-25 |
| 巻 | 27巻 |
| 号 | 2号 |
| 開始ページ | 1 |
| 終了ページ | 9 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307210 |
| JaLCDOI | 10.18926/15370 |
|---|---|
| フルテキストURL | Mem_Fac_Eng_OU_27_2_73.pdf |
| 著者 | Kroumov Valeri T.| 井上 昭| 増田 士朗| |
| 抄録 | This report deals with the problem of designing an adaptive observer for estimating unknown periodical disturbances. This is very practical problem because in the area of control of servomechanisms such disturbances are always encountered. When the disturbance cannot be directly measured or eliminated at the source it is necessary to perform a prediction. When a periodical disturbance is present the frequencies appear as unknown parameters and they have to be identified. In order to identify the unknown parameters, it is necessary to transform the composite system model, which contains the models of the controlled system and the disturbances, into observable canonical form. In addition, an inverse transformation is required to calculate the estimates of the present disturbances. In this report, firstly, a review of an adaptive observer for estimation of unknown periodical disturbances is presented. Later a calculation of the disturbance estimate is derived using the algebraic programming system REDUCE. The proposed method here allows to perform all the necessary transformations and to obtain the disturbance estimation without using the transformation matrix. The calculations of these transformations are complicated and, hitherto, there is no simple method to perform them. The results of disturbance estimation are illustrated by two examples. |
| 出版物タイトル | Memoirs of the Faculty of Engineering, Okayama University |
| 発行日 | 1993-03-25 |
| 巻 | 27巻 |
| 号 | 2号 |
| 開始ページ | 73 |
| 終了ページ | 85 |
| ISSN | 0475-0071 |
| 言語 | 英語 |
| 論文のバージョン | publisher |
| NAID | 120002307731 |