start-ver=1.4
cd-journal=joma
no-vol=15
cd-vols=
no-issue=5
article-no=
start-page=1128
end-page=
dt-received=
dt-revised=
dt-accepted=
dt-pub-year=2023
dt-pub=20230223
dt-online=
en-article=
kn-article=
en-subject=
kn-subject=
en-title=
kn-title=Shear Bond Strength of Resin Luting Materials to Lithium Disilicate Ceramic: Correlation between Flexural Strength and Modulus of Elasticity
en-subtitle=
kn-subtitle=
en-abstract=
kn-abstract=This study investigates the effect of the curing mode (dual-cure vs. self-cure) of resin cements (four self-adhesive and seven conventional cements) on their flexural strength and flexural modulus of elasticity, alongside their shear bond strength to lithium disilicate ceramics (LDS). The study aims to determine the relationship between the bond strength and LDS, and the flexural strength and flexural modulus of elasticity of resin cements. Twelve conventional or adhesive and self-adhesive resin cements were tested. The manufacturer's recommended pretreating agents were used where indicated. The shear bond strengths to LDS and the flexural strength and flexural modulus of elasticity of the cement were measured immediately after setting, after one day of storage in distilled water at 37 degrees C, and after 20,000 thermocycles (TC 20k). The relationship between the bond strength to LDS, flexural strength, and flexural modulus of elasticity of resin cements was investigated using a multiple linear regression analysis. For all resin cements, the shear bond strength, flexural strength, and flexural modulus of elasticity were lowest immediately after setting. A clear and significant difference between dual-curing and self-curing modes was observed in all resin cements immediately after setting, except for ResiCem EX. Regardless of the difference of the core-mode condition of all resin cements, flexural strengths were correlated with the LDS surface upon shear bond strengths (R-2 = 0.24, n = 69, p < 0.001) and the flexural modulus of elasticity was correlated with them (R-2 = 0.14, n = 69, p < 0.001). Multiple linear regression analyses revealed that the shear bond strength was 17.877 + 0.166, the flexural strength was 0.643, and the flexural modulus was (R-2 = 0.51, n = 69, p < 0.001). The flexural strength or flexural modulus of elasticity may be used to predict the bond strength of resin cements to LDS.
en-copyright=
kn-copyright=

en-aut-name=IrieMasao
en-aut-sei=Irie
en-aut-mei=Masao
kn-aut-name=
kn-aut-sei=
kn-aut-mei=
aut-affil-num=1
ORCID=

en-aut-name=OkadaMasahiro
en-aut-sei=Okada
en-aut-mei=Masahiro
kn-aut-name=
kn-aut-sei=
kn-aut-mei=
aut-affil-num=2
ORCID=

en-aut-name=MaruoYukinori
en-aut-sei=Maruo
en-aut-mei=Yukinori
kn-aut-name=
kn-aut-sei=
kn-aut-mei=
aut-affil-num=3
ORCID=

en-aut-name=NishigawaGoro
en-aut-sei=Nishigawa
en-aut-mei=Goro
kn-aut-name=
kn-aut-sei=
kn-aut-mei=
aut-affil-num=4
ORCID=

en-aut-name=MatsumotoTakuya
en-aut-sei=Matsumoto
en-aut-mei=Takuya
kn-aut-name=
kn-aut-sei=
kn-aut-mei=
aut-affil-num=5
ORCID=

affil-num=1
en-affil=Department of Biomaterials, Okayama University Graduate School of Medicine, Dentistry and Pharmaceutical Science
kn-affil=

affil-num=2
en-affil=Department of Biomaterials, Okayama University Graduate School of Medicine, Dentistry and Pharmaceutical Science
kn-affil=

affil-num=3
en-affil=Department of Prosthodontics, Division of Dentistry, Okayama University
kn-affil=

affil-num=4
en-affil=Department of Prosthodontics, Division of Dentistry, Okayama University
kn-affil=

affil-num=5
en-affil=Department of Biomaterials, Okayama University Graduate School of Medicine, Dentistry and Pharmaceutical Science
kn-affil=
en-keyword=shear bond strength
kn-keyword=shear bond strength
en-keyword=flexural strength
kn-keyword=flexural strength
en-keyword=flexural modulus of elasticity
kn-keyword=flexural modulus of elasticity
en-keyword=resin luting materials
kn-keyword=resin luting materials
en-keyword=durability
kn-keyword=durability
en-keyword=dual-cure vs
kn-keyword=dual-cure vs
en-keyword=self-cure
kn-keyword=self-cure
END