result 47892 件
JaLCDOI | 10.18926/15825 |
---|---|
FullText URL | Mem_Sch_Eng_OU_20_2_55.pdf |
Author | Taniguchi Takeo| Mitsuoka Kazuhiko| Kajitani Eiji| |
Abstract | In this study a new automatic mesh generator for 2- dimensional finite element analysis is proposed, and its effectivity is surveyed through a number of test examples. Proposed one is for a micro-computer, and the program is written in BASIC. The user needs no preparation for making finite element model in advance. All of the neccessary informations are displayed on CRT display and its user may answer for questions. It is expected that the cost neccessary for preparing the input-data for finite element analysis is largely decreased. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1986-02-28 |
Volume | volume20 |
Issue | issue2 |
Start Page | 55 |
End Page | 66 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307353 |
JaLCDOI | 10.18926/15824 |
---|---|
FullText URL | Mem_Sch_Eng_OU_17_1_97.pdf |
Author | Oda Kiichi| Yoshio Tetsuo| O-oka Kazuo| |
Abstract | A series of ferroelectric glass-ceramics was elaborated by the controlled growth of Ba(1-x)Sr(x)TiO(3) crystal particles in the glass system 60[Ba(1-y)Sr(y)]TiO(3)-10Al(2)O(3)-30SiO(2)(0≦y≦0.2) in molar basis. Analysis of crystal phases by X-ray diffraction revealed that Sr content in Ba(1-x)Sr(x)TiO(3) increased with increasing content of SrO in glasses by its preferential transfer into the crystal phase, and the appropriate temperature for the crystal growth was 1100°C. Curie temperatures of glass -ceramics shifted to lower temperature with increasing SrO content in the crystal and comparatively high dielectric constant was obtained at room temperature for a glass-ceramics with y=0.2. Frequency dependences of dielectric constant and loss tangent were examined in the frequency range from 1 K to 1 M Hz. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1983-02-25 |
Volume | volume17 |
Issue | issue1 |
Start Page | 97 |
End Page | 105 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307890 |
JaLCDOI | 10.18926/15823 |
---|---|
FullText URL | Mem_Sch_Eng_OU_20_2_47.pdf |
Author | Inouye Hiroshi| |
Abstract | When expressway and roads coexist, it is necessary to establish a reasonable traffic share between them. It may be practiced by the regulation of toll-rate of expressway. But at an occasional traffic congestion, the reasonable share is disturbed, so that some traffic control means should be taken. In this paper, we deal how to control inflows on expressway, from a viewpoint of the optimal share between expressway and roads. The minimization of total travel cost in a system is aimed under traffic equilibrium conditions. The problem is formed as a two-stage programming model, and a simple example solving the problem is showed. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1986-02-28 |
Volume | volume20 |
Issue | issue2 |
Start Page | 47 |
End Page | 53 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307423 |
JaLCDOI | 10.18926/15822 |
---|---|
FullText URL | Mem_Sch_Eng_OU_20_2_35.pdf |
Author | Nago Hiroshi| Maeno Shiro| |
Abstract | Under the attack of storm waves, there are many destructions of coastal structures in the forms of sinking and sliding. These types of destructions will be in close relation to the dynamic behavior of sand bed around the structures. From this point of view, in this paper, we investigate the characteristics of the pore water pressure and effective stresses in the highly saturated sand bed under oscillating water pressure theoretically. The results indicate that the oscillating water pressure induce the notable drop of strength of sand bed around the structure under certain condition. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1986-02-28 |
Volume | volume20 |
Issue | issue2 |
Start Page | 35 |
End Page | 45 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307664 |
JaLCDOI | 10.18926/15821 |
---|---|
FullText URL | Mem_Sch_Eng_OU_17_1_81.pdf |
Author | Taniguchi Takeo| Kanei Toshio| |
Abstract | In this investigation the estimation method of the number of iterations for definite convergence condition by use of the Gauss-Seidel method applied for a set of linear equations which is obtained from the finite element analysis (or the finite difference analysis) of any rectangular area subdivided into N*M is proposed. Though the number of iterations can be obtained by using the eigenvalue of the governing equations, the proposed method does not require the eigenvalue but only the values of Nand M. Numerical experiments on this estimation method clarify that the estimated values are within the error bound of 10%. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1983-02-25 |
Volume | volume17 |
Issue | issue1 |
Start Page | 81 |
End Page | 96 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307520 |
JaLCDOI | 10.18926/15820 |
---|---|
FullText URL | Mem_Sch_Eng_OU_17_1_73.pdf |
Author | Myojin Sho| Ohnishi Masahiko| |
Abstract | Some extension is made of the previous papers of the same title in order to investigate (1) what aspect consumers' surplus has according to the characteristics of inverse demand curve and (2) where the maximum consumers' surplus is reached in an equilibrium of toll revenues and cost. As for (1) three kinds of inverse demand curves are assumed in general form. The marginal consumers' surplus to expansion of expressway network is proved to be of definite sign (positive or negative) or equal to zero according to each curve assumed. For each of curves, the region where consumers' surplus finds its maximum is also shown on the expressway users ~ network expansion plane. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1983-02-25 |
Volume | volume17 |
Issue | issue1 |
Start Page | 73 |
End Page | 79 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307936 |
JaLCDOI | 10.18926/15819 |
---|---|
FullText URL | Mem_Sch_Eng_OU_17_1_61.pdf |
Author | Maeno Shiro| Nago Hiroshi| |
Abstract | In this paper the liquefaction of sand bed under oscillating water pressure are treated as a basic study of the prevention works against the scouring around the hydraulic structures. The results of the former resurch show that the occurrence of the liquefaction depends on both properties of the oscillating water pressure and of the sand layer. Considering the latter properties, that is, the resistivity against the liquefaction increases with the increase of the permeability of the sand bed, we propose the displcement method as one of the prevention works, which is a method to displace the upper layer of the sand bed by the sand with large permeability. The effects of this method are investigated theoretically and experimentally. By the experimental study, it is shown that the proposed displacement method has the apparent effect to prevent the liquefaction. The experimental results are explained fairly well by the theoretical analysis based on the theory of the flow through the elastic porous media. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1983-02-25 |
Volume | volume17 |
Issue | issue1 |
Start Page | 61 |
End Page | 71 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
JaLCDOI | 10.18926/15818 |
---|---|
FullText URL | Mem_Sch_Eng_OU_20_2_21.pdf |
Author | Yamada, Masuo| Ohta, Mutsuo| Sakakibara, Akira| |
Abstract | A series of small-angle X-ray scattering photographs with monochromated and point focussed copper Ka(1) radiation was taken of a single crystal of an Al-4mass % Cu alloy at the as-quenched state from 823K and at successive stages of ageing at 313K. The crystal was so oriented that the incident direction of the radiation was along [001] axis, and was cooled with liquid nitrogen during the exposure. The pattern of the as-quenched state was homogeneous, but each of the patterns of the aged states consisted of streaks along [100] and [010] directions and a quasi-ring around the trace of the incident beam on the film (even at the shortest ageing time. l6sec). The most intense regions were found in [100], [010] , [100] and [010] directions on the ring. With the progress of the ageing the streaks and the ring became more intense and narrower. The results can be interpreted from points of view of the formation of the GP zones parallel to {100} planes ab initio, the effect of the inter-particle interference on scattering of X-rays, and the growth of the GP zones with the ageing. Guinier radius of the GP zones at each stage can be obtained from intensity change along [110], and the values are reasonably consistent with those obtained from the cross section of the streak. The presence of multi-layer zones, besides the one-layer ones, is suggested from the humps found on several intensity curves along [100] at later stages. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1986-02-28 |
Volume | volume20 |
Issue | issue2 |
Start Page | 21 |
End Page | 33 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307538 |
JaLCDOI | 10.18926/15817 |
---|---|
FullText URL | Mem_Sch_Eng_OU_17_1_41.pdf |
Author | Mori Chuji| Hattori Susumu| Hamate Shinya| |
Abstract | The algorithm of automatic stereo plotting by iterative image correlation from aerial photographs and the corresponding empirical tests are described. The algorithm is oriented to off-line process, using a image scanner and a general purpose computer, and consists of 3 hierarchical correlation steps, based on one-dimensional matching using usual correlation maximum. For the correlation calculation, the FFT is effectively used. Though some defects exist in the algorithm at present, close contour plotting to middle scale maps is available except in hilly regions, in which marked features in ground covers do not exist. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1983-02-25 |
Volume | volume17 |
Issue | issue1 |
Start Page | 41 |
End Page | 60 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307285 |
JaLCDOI | 10.18926/15816 |
---|---|
FullText URL | Mem_Sch_Eng_OU_17_1_15.pdf |
Author | Himei Toyoji| Nakanishi Sen-ichiro| Funabiki Shigeyuki| Komatsubara Hitoshi| Kurose Osamu| |
Abstract | An ac phase control circuit by thyristor is widely used in industry, The characteristics of the singlephase circuit with series RLC elements are numerically analyzed, and is reported the interesting phenomenon of step-up voltage without transformer. However, the performance of three phase phase control circuit with series RLC elements is not made clear. In this paper, the performance of three-phase control circuit of a balanced and an unbalanced load with series RLC elements is described. The analytical programs with each load are developed, and it is clarified that the calculated by this analytical program agree well with the measured. The calculated results, e.g. waveforms, RMS values of voltage and current, power, and power factor are illustrated and discussed the step-up phenomenon in three phase. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1983-02-25 |
Volume | volume17 |
Issue | issue1 |
Start Page | 15 |
End Page | 40 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307185 |
JaLCDOI | 10.18926/15815 |
---|---|
FullText URL | Mem_Sch_Eng_OU_20_2_1.pdf |
Author | Miyahara Toshiro| Takahashi Teruo| |
Abstract | Bubble columns are extensively used in the chemical industry. This paper evaluates the present state of the art on the size of bubbles from a sieve plate and gas holdup, mainly on the basis of the results of the authors, including previous ones. The size of bubbles formed from a sieve plate has an insignificant effect of chamber volume, and gas holdup shows some different behavior, depending on the hole diameter to liquid depth. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1986-02-28 |
Volume | volume20 |
Issue | issue2 |
Start Page | 1 |
End Page | 20 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307288 |
JaLCDOI | 10.18926/15814 |
---|---|
FullText URL | Mem_Sch_Eng_OU_17_1_1.pdf |
Author | Takahashi Teruo| Miyahara Toshiro| |
Abstract | This paper deals with the comparison of gas-liquid holdup and froth height on a perforated plate under various operational conditions such as liquid stagnant, cocurrent, countercurrent and crosscurrent gas-liquid flow system. Tendency to foam is remarkable in countercurrent and crosscurrent flow system. The crosscurrent flow system is suitable for the operation of mass transfer from the point of view of gas-liquid holdup. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1983-02-25 |
Volume | volume17 |
Issue | issue1 |
Start Page | 1 |
End Page | 13 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307710 |
JaLCDOI | 10.18926/15813 |
---|---|
FullText URL | Mem_Sch_Eng_OU_16_2_89.pdf |
Author | Kohno Iichiro| Nishigaki Makoto| |
Abstract | In this paper are described on the finite element analysis of the nonsteady behavior of interface between salt- and freshwater in coastal groundwater. In order to investigate the validity and the accuracy of this numerical analysis solution, the results calculated by this finite element analysis have been compared with the laboratory model tests. The numerical results showed the very good agreement with the experimental data. Moreover, some applications of this analytical method have been performed. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1982-03-29 |
Volume | volume16 |
Issue | issue2 |
Start Page | 89 |
End Page | 99 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307453 |
JaLCDOI | 10.18926/15812 |
---|---|
FullText URL | Mem_Sch_Eng_OU_16_2_75.pdf |
Author | Okamoto Takuji| |
Abstract | Some modifications of an asynchronous ring arbiter are proposed. This arbiter is composed of a chain of cells. Each cell has one to one correspondence to a device. In the chain, there exists only one privilege to arbitrate conflicts of requests from many devices. A class of modifications is high speed arbiters, obtained by increasing the number of connecting wires between two adjacent cells. As the results, the time required for the privilege to pass through a cell decreases by about one-half compared with the original arbiter. Another class of modifications is arbiters with priority rules. They are obtained by adding a few hardware to the original arbiter. The priority order of request acknowledgements in all the cells is specified. Using above modifications, conflicts of requests in many digital systems may be feasibly arbitrated. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1982-03-29 |
Volume | volume16 |
Issue | issue2 |
Start Page | 75 |
End Page | 87 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307859 |
JaLCDOI | 10.18926/15811 |
---|---|
FullText URL | Mem_Sch_Eng_OU_20_1_45.pdf |
Author | Korenaga Takashi| Moriwake Tosio| Takahashi Teruo| |
Abstract | A simple system was developed for the fully automatic and continuous measurement of chemical oxygen demand (COD) in wastewater samples based on colorimetry of dichromate. A sample and a solution of sulfuric acid (1+1) containing 2mM potassium dichromate are continuously pumped with a double-reciprocating micro-pump at each flow rate of 0.3 ml/min. The wastewater sample is filtered at first with a 100-mesh stainless filter and then mixed with the dichromate solution in the mixing joint. The mixture is introduced into a reaction coil made of poly(tetrafluoroethylene) tubing (1 mm i.d., 3 mm o.d., and 20 m length), being placed in an oil bath (120℃). After reaction, the mixture passes into a quartz tubular flow-through cell (10 mm path length, 18 μl volume) in a spectrophotometer, and the absorbance is measured at 445 nm. The COD value of the sample is automatically estimated from the amount of decreased absorbance. The system was successfully applied to COD measurement of some waters, and to continuous monitoring of COD in wastewater of university laboratories. The system was also evaluated by comparing with the flow injection analyzer system previously developed by the authors. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1985-11-08 |
Volume | volume20 |
Issue | issue1 |
Start Page | 45 |
End Page | 52 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307695 |
JaLCDOI | 10.18926/15810 |
---|---|
FullText URL | Mem_Sch_Eng_OU_16_2_59.pdf |
Author | Hida M.| Maeda H.| Tanabe K.| Kamijo N.| Terauchi H.| |
Abstract | The EXAFS spectroscopy equipment constructed from an asymmetrical cut flat monochromator and PSPC is applied to the structural determination of pure α-iron which has small difference (0.038nm) in the first and second nearest neighbour distance. The efficiency of the curve fitting method for the two shell model of known structure material (α-iron) is discussed, in addition to describing the details of the experimental procedure of our new type of spectrometer and of the EXAFS data analysis. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1982-03-29 |
Volume | volume16 |
Issue | issue2 |
Start Page | 59 |
End Page | 74 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307651 |
JaLCDOI | 10.18926/15809 |
---|---|
FullText URL | Mem_Sch_Eng_OU_16_2_45.pdf |
Author | Funabiki Shigeyuki| Iyasu Masakatsu| Kamura Tsutomu| Himei Toyoji| |
Abstract | In this paper, the analysis of transient performance of two-phase induction motor driven by a voltage source inverter with current limiter is described. The motor is represented by using a two-axis model, that is, the Kron primitive machine. The state equations of mechanical-electrical system are derived. The calculation method with a discrete point of time is employed in order to decrease the CPU time of computer. The calculated results gained from this method agree well with the measured. Then, with the aid of this analytical method, the discussions on transient performance of this system are also performed. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1982-03-29 |
Volume | volume16 |
Issue | issue2 |
Start Page | 45 |
End Page | 58 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307761 |
JaLCDOI | 10.18926/15808 |
---|---|
FullText URL | Mem_Sch_Eng_OU_20_1_35.pdf |
Author | Yamada, Masuo| Sakakibara, Akira| Ohta, Mutsuo| |
Abstract | Photographic method for measurement of small-angl X-ray scattering (SAXS) is improved. Intense pointfocussing incident beam is obtained by using doubly bent crystal monochromator made of aluminium single crystal. Microphotometry and the subsequent calculation to obtain profiles, Guinier and Porod radii, integrated intensities, and so on are facilitated by using microcomputer. Integrated SAXS intensities measured from an Al-Zn alloy which has been treated under the same heat treatment conditions are coincident with one another with probable errors less than ±6 % . Ratio of the integrated intensities obtained from two Al-Zn alloys of different composition is reasonable compared with the quasi-equilibrium phase diagram. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1985-11-08 |
Volume | volume20 |
Issue | issue1 |
Start Page | 35 |
End Page | 43 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307157 |
JaLCDOI | 10.18926/15807 |
---|---|
FullText URL | Mem_Sch_Eng_OU_16_2_31.pdf |
Author | Himei Toyoji| Nakanishi Sen-ichiro| Funabiki Shigeyuki| |
Abstract | The influence of magnetic saturation of iron-core on the performance of thyristor phase control circuit with series RLC elements is described. The circuit is analyzed by applying an approximate model of three straight lines to the flux Φ vs. current i curve of the iron-core reactor. And the influence on waveforms, r.m.s. values, power factor and response are discussed. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1982-03-29 |
Volume | volume16 |
Issue | issue2 |
Start Page | 31 |
End Page | 43 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307371 |
JaLCDOI | 10.18926/15806 |
---|---|
FullText URL | Mem_Sch_Eng_OU_16_2_17.pdf |
Author | Himei Toyoji| Nakanishi Sen-ichiro| Funabiki Shigeyuki| |
Abstract | The phase control characteristics in a thyristor phase control circuit with parallel resonance elements indicate very interesting phenomenon. Several extreme values appear on the phase control curve. The phenomenon is different from the step-up one in a thyristor phase control circuit with series RLC elements which is interpreted as series resonance. To comprehend the circuit performance with those loads, it is necessary that the phenomenon on extreme value is physically clarified from other viewpoints. In this paper the performance in this circuit is studied from two viewpoints of a natural oscillation and a parallel resonance. Then, it is found that the performance depends on a natural frequency in thyristor conducting period and a parallel resonance frequency in thyristor non-conducting period. Therefore, the interesting phenomenon on extreme value is affected by the alternative of natural frequency or parallel resonance frequency. |
Publication Title | Memoirs of the School of Engineering, Okayama University |
Published Date | 1982-03-29 |
Volume | volume16 |
Issue | issue2 |
Start Page | 17 |
End Page | 29 |
ISSN | 0475-0071 |
language | English |
File Version | publisher |
NAID | 120002307189 |