Conditions

close

result 352 件

JaLCDOI 10.18926/OER/12408
Title Alternative An Essay on Comparative Case Analyses in Management Studies, Part I.
FullText URL 38_4_039_050.pdf
Author Fujii, Daiji|
Abstract 本稿は,経営学の分野で,比較事例分析という研究方法が,どのように理論産出に貢献しうるかを考察することを目的とした作業の一部である。 経営学の文脈では,実証的研究方法として事例研究が頻繁に実施されている。しかしながら,成果として提出される理論がどの程度妥当なものと認められ得るのかについて,常に批判に晒されるリスクを負っている。単純ではあるけれども,もっとも強力な批判の矛先は,ごく少数の事例を見ただけ では,仮説の検証という意味では心もとない,というその一点に向けられている。確かに事例研究に対する擁護者は存在するけれども,投稿論文でも「仮説」という用語を論文に用いるや否や,匿名査読者から例外なく容赦ない批判を浴びせられるのが現実である。 そもそも事例研究は,仮説の普遍的妥当性を主張するものではない。登場する行為者の目的や動機,さらに行為者間の相互作用過程にまで踏み込んだ,内部一貫した論理展開を行うことのほうが,経営現象をより深いレベルで理解できるはずだという認識が,その主張の根底に流れている。事例分析を行う研究者は,仮説の検証ではなくて,理論産出を目指すのが良いと言い換えられるかもしれない。この目的に照らせば,既存の研究蓄積との対比で問題が提起され,理論的主張に対して事例記述が例証と位置づけられることによって,事例研究は成り立つことになる。 ただしその主張にたどり着くまでの調査過程で,どのような問題を提起し,どのような主張を展開すべきなのかに迷ってしまうことがある。というのは,しばしば事例記述のためのデータ収集には長い時間と多大な労力がかかるために,どこに向かうべきなのか「腹を括る」よりも前に実質的な試行 錯誤を始めざるを得ないからである。 毎日図書館に通って,高度経済成長の最中に出版された(しかも開けばまだ真新しい)新聞の縮刷版をひっくり返したり,やっとの思いでキー・パーソンへのアクセスがかなったにも拘わらず,気の利いた質問のひとつもぶつけられずに悔しい思いをしたり,調査協力者に内容確認を依頼した結果,公表を辞めるよう求められたり,どこに向かうとも知れない憂鬱な作業は続く。さらにその事例については他の誰よりも詳しく通じてしまった結果,理論的な整理が付かないまま膨大な事実を草稿の中で列挙してしまうというのも,多かれ少なかれ誰にでもあり得る。これらのことが定性的な研究方法は「職人仕事」であると皮肉られる理由にもなっており,とくに仮説検証を重視する人々にとっては,追試可能性の低さと結びつけて,格好の批判材料を提供することになる。本稿の意図が,こうした見解に加担することではないのは言うまでもない。しかしながら,筆者自身が事例研究を行う立場だからこそ,それがあまりに感性とか根性論に訴えねばならないもののように思われて,歯がゆい思いをすることも多いのである。 以上のような試行錯誤のプロセスは,研究者として駆け出しの間は当然避けられないものだけれども,標準的とは言わないまでも「何かしら有意義な理論の産出に辿りつくまでに最低限やっておくと良いこと」という意味での研究作法があればこそ,研究者コミュニティ全体での知識の効率的蓄積が可能というものである。その研究作法が,産出された理論の確からしさを一定程度保証してくれる方法論的配慮がなされたものであれば,より望ましい。 ここで有用なアドバイスが,グレイザー・シュトラウス(1967)に求められる。理論産出に主眼を置き,「理論的サンプリング」による絶えざる比較法を用いることで,研究者の着眼は理論的にも有 意味な構成概念へと昇華させることができると示唆されている。理論的サンプリングとは,まず十分な分散を確保したデータがあることを前提としたランダムサンプリングとは対照的に,理論的に有意義と考えられる比較対象を分析者が意図的に選択し,比較分析を何度も繰り返すことで,新たな構成 概念を発見するというものである。 ただし残念なことに,この文献は一読して理解できるという性質のものではない。読者が自らの経験や知識を当てはめながら少しずつ解釈を加えていかないことには,著者の豊かな含意を捉え損なうものである。そこで筆者は,いくつか参考になりそうな文献を渉猟しながら,比較作業が理論の産出 という研究作業にどのような指針を与え,最終的な理論的主張に対して方法論的な正当性をどのように与えうるのかを議論することにした。 筆者自身は経営学を専攻としており,グレイザーらは医療現場を分析対象としている社会学者であるので,両者の認識ギャップを埋める作業は容易ではない。いくらか遠回りのようではあるけれども,まず本稿では経営学者としてグレイザーらの所論に依拠しつつ,実際に比較事例研究を実践した 研究者の著作に当たることから始めようと考えている。続いて次稿以降では,グレイザーらの研究領域である医療現場の社会学を対象にして,彼らの意図するところをより深く掘り下げていくことを予 定している。最終的には,筆者自身の立場を明らかにする作業が必要になるけれども,それはもう少し先のこととなろう。 本稿は,いわば先人の研究実践を事例研究することを通じて,筆者なりの研究作法を探る試行錯誤プロセスの一環であり,相撲で言えばぶつかり稽古のようなものである。
Publication Title 岡山大学経済学会雑誌
Published Date 2007-03
Volume volume38
Issue issue4
Start Page 39
End Page 50
ISSN 03863069
language Japanese
Copyright Holders 岡山大学経済学会
File Version publisher
NAID 120002304919
JaLCDOI 10.18926/OER/12407
Title Alternative Evolving Technical Capabilities in Turmoil : A Field Research on The Value Chain Network of Denim Jeans Industry in The Setouchi District (1)
FullText URL 39_2_001_020.pdf
Author Fujii, Daiji| Tomae, Hisao| Yamamoto, Tomoyuki| Inoue, Jiro|
Abstract 本稿は,岡山大学経済学部と(財)岡山経済研究所の共同研究プロジェクトの一環として行われた調査研究の報告書に加筆修正を加えたものである。その報告書は,会員組織である岡山経済研究所の会員向け冊子として配布される予定であり,それとは別に経営学などの研究者に向けて成果を公表することが,本稿の目的となっている。紙幅の制約上,いくつかの独立した論考としての体裁をとりながら連続して掲載する予定であり,その構成は以下の通りである。
Publication Title 岡山大学経済学会雑誌
Published Date 2007-09
Volume volume39
Issue issue2
Start Page 1
End Page 20
ISSN 03863069
Related Url http://eprints.lib.okayama-u.ac.jp/12400/ http://eprints.lib.okayama-u.ac.jp/12383/
language Japanese
Copyright Holders 岡山大学経済学会
File Version publisher
NAID 120002304912
JaLCDOI 10.18926/OER/12400
Title Alternative Evolving Technical Capabilities in Turmoil : A Field Research on The Value Chain Network of Denim Jeans Industry in The Setouchi District (2)
FullText URL 39_3_023_042.pdf
Author Fujii, Daiji| Tomae, Hisao| Yamamoto, Tomoyuki| Inoue, Jiro|
Abstract 本稿の目的は,産地型集積の維持・発展メカニズムの分析に先立つ予備的作業として,三備地区が他の繊維・アパレル産地に比較して産地力の持続に成功していることをフィールド調査を通じて考察することである。これに必要な作業としてまず,デニム・ジーンズの歴史や,ジーンズの消費財としての特殊性,三備地区がジーンズに出会ってから今日に到るまでの大きな流れなどを掴む。また倉敷市児島地区を中心とした製販ネットワークの現状を具体的に報告する。前稿で述べたように,産業集積にアプローチするうえで比較優位説を展開した「ヘクシャー=オリン定理」を採用するのと並行して,Porter(1990a,1990b)が前提するようなプレイヤーの自律的行 為能力を重視したいというのが,本研究の立場であった。ヘクシャー=オリン定理を適用すると,綿花の産地であった三備地区で綿素材を中心とした繊維・アパレル産業が形成されたことを理解しやすいであろうし,時代の変化に応じて企業が戦略的に経営の舵を切る様子に着目し,児島地区を中心とした製販ネットワークを産地型集積の一例として捉えることもまた有意義な作業であろう。ジーンズ産地の持続・発展のメカニズムを考察するとき,さらに一歩踏み込んで既存の産業集積論では説明しきれない部分を探し出し,より包括的な理解を構築したいと考えている。そこで<実践コミュニティ>という新しい視座の導入を試みるのだけれども,具体的には,産地内の企業間の切磋琢磨や競争的な試行錯誤が,ジーンズ産地の持続・発展に影響を与えた可能性を探求したいと考えている。ただしその分析作業は,次章以降の課題である。本章では,既存の理論を若干意識しながら,まずデニム・ジーンズや三備地区の簡単な歴史を振り返り,ジーンズ固有の厚地,芯白,綾織といった特性について説明し,三備地区が綿花の産地から紡績,織物,縫製など繊維産地へ発展した流れを追う(第2節)。続いて,企業が戦略的に経営の舵を切っていく「ジーンズ国産化」の流れを追う(第3節)。すなわち他のアパレル製品と比較してデニム・ジーンズの最大の特徴であり,またアメリカのジーンズには本来なかった洗い加工技術を中心にして,三備地区のジーンズ作りに対する取組みを概観する。続いてインタビューを通じて得られた三備地区に関するイメージを報告する。まず集積の主体である企業群を大きく3つの業態に分割し,それらの特徴を理念型として整理し,それぞれのメリットとデメリットを報告する(第4節)。続いて集積メリットのひとつとして,若手経営者の起業を促す要素を考察し,どのような試みが展開されているのかを報告する(第5節)。
Publication Title 岡山大学経済学会雑誌
Published Date 2007-12
Volume volume39
Issue issue3
Start Page 23
End Page 42
ISSN 03863069
Related Url http://eprints.lib.okayama-u.ac.jp/12407/ http://eprints.lib.okayama-u.ac.jp/12383/
language Japanese
Copyright Holders 岡山大学経済学会
File Version publisher
NAID 120002304834
JaLCDOI 10.18926/OER/12383
Title Alternative Evolving Technical Capabilities in Turmoil :A Field Research on The Value Chain Network of Denim Jeans Industry in The Setouchi District (3)
FullText URL 39_4_177_187.pdf
Author Fujii, Daiji| Tomae, Hisao| Yamamoto, Tomoyuki| Inoue, Jiro|
Abstract This paper is the final report of our field research of the denim Jeans value chain network in the Setouchi district. Based on the argument delivered in our earlier reports, we now concentrate on the mechanism which underlies the survival of the district under the fierce global competitive pressures. We suggest that local economies such as ours full of small and medium sized producers of denim jeans tend to have individualistic industrial climates. Textile converters and fashion designers and the like do not hesitate to learn from their competitors by imitation. This is because they usually receive training on commercial knowledge and technical skills through their actual daily jobs instead of formal education at professional schools. Imitation is not only an important part of their professional learning, but also one of effective ways to save experimental costs to raise numerous ideas and prototype new products. This tendency creates a certain level of homogeneity of product designs, which also creates certain pressures for the manufacturers to differentiate themselves from their own competitors. Under this anbivalent iudustrial climate, the manufacturers seek their uniqueness through improvised reinterpretation of the original product designs. This uniqueness which creeps in the imitation process may come from the recent movement where some of young and entrepreneurial startups and the like acquire deserted production capacities that used to be owned by older generations. Faced with the recent fierce competitive pressures, such old generations have lost their motivation to continue their business and deserted their production facilities. The younger generation gives lives to such facilities and receives wider learning opportunities and flexible production capabilities under the new low−volume diversified production paradigm. Under this new circumstance, planned obsolescence of products becomes common and overall design and production capabilities are deemed to evolve quite quickly and effectively.
Publication Title 岡山大学経済学会雑誌
Published Date 2008-03
Volume volume39
Issue issue4
Start Page 177
End Page 187
ISSN 03863069
Related Url http://eprints.lib.okayama-u.ac.jp/12407/ http://eprints.lib.okayama-u.ac.jp/12400/
language Japanese
Copyright Holders 岡山大学経済学会
File Version publisher
NAID 120002304821
Author Goto, Tanjuro| Oohashi, Yuji| Shimizu, Nozomi| Morisita, Teruhisa| Fujii, Kazunori| Ishikawa, Junya| Shima, Kohji|
Published Date 2008-02
Publication Title 岡山大学農学部学術報告
Volume volume97
Issue issue1
Content Type Departmental Bulletin Paper
Author Fujii, Takashi|
Published Date 2007-03-23
Publication Title
Content Type Thesis or Dissertation
Author Fujii, Akira|
Published Date 2007-03-23
Content Type Thesis or Dissertation
JaLCDOI 10.18926/11650
Title Alternative Maternity swimming at M isasa Hospital of Okayama University Medical School-Fourth report. The growth and development of babies who were born from the mothers who experienced the maternity swimming
FullText URL 062_027_031.pdf
Author Okuda, Hiroshi| Takatori, Akimasa| Kondo, Yuji| Sakata, Junko| Kamimoto, Manabu| Fujii, Junko| Masui, Etsuko| Nagae, Chiho| Kawahara, Mitsuko| Tanizaki, Yoshiro|
Abstract 第1報において妊婦水泳に関する妊婦の認識について報告し,第2報において妊婦水泳の現状とその適応について報告し,第3報にて妊婦水泳が循環器系に与える影響について報告した。今回は,母親が妊婦水泳を行い出生後1年以上経過した児の発育,発達状況についてアンケート調査を行った。その結果,発育e発達状況は艮好であった。現時点で全例正常な発達をしていた。このことより我々の行っている妊婦水泳は児の発育,発達に悪影響を及ぼさないことが確かめられた。
Keywords 妊婦水泳 (Maternity swimming) 児の発育・発達 (Growth and Development of the child)
Publication Title 環境病態研報告
Published Date 1991-08
Volume volume62
Start Page 27
End Page 31
ISSN 0913-3771
language Japanese
File Version publisher
NAID 120002313455
JaLCDOI 10.18926/fest/11639
FullText URL 001_193_198.pdf
Author Shimada, Kiyoshi| Nishimura, Sin-ichi| Fujii, Hiroaki|
Abstract This paper presents a new method for prediction of consolidation settlements of soft grounds. The method is based on the theoretical result which shows that the settlement velocity of soft grounds non-improved or improved with sand drains decreases exponentially with time. Final settlements can be easily derived from the regression analysis for the relationship between the elapsed time and the observed settlement velocity. The method has advantages of its simplicity and capability to give the satisfactorily good estimate of the consolidation settlements, and also the support of the theoretical background.
Keywords consolidation settlement prediction soft ground sand drains one-dimensional consolidation
Publication Title 岡山大学環境理工学部研究報告
Published Date 1996-03
Volume volume1
Issue issue1
Start Page 193
End Page 198
ISSN 1341-9099
language English
File Version publisher
NAID 120002314033
JaLCDOI 10.18926/fest/11636
FullText URL 001_181_192.pdf
Author Fujii, Hiroaki| Narita, Mutsuya| Cheng Chin Thai| Shimada, Kiyoshi| Nishimura, Shinichi| Ofori Emanual|
Abstract This paper describes the prediction of seepage in the impervious zones of six embankment dams by seepage analysis. In addition, by making use of the available monitored pore water pressure data of the first filling of reservoir, back analysis was carried out to estimate the best fit seepage parameters. The estimated parameters were used for further prediction of pore water pressures in subsequent monitored durations with reasonable accuracy. The accuracy of prediction was evaluated quantitatively by the prediction difference and error index. The results show that the error indices in the upstream sides of the impervious zones are smaller than those in the downstream sides.
Keywords Unsaturated soils fill dams pore water pressure back analysis FEM
Publication Title 岡山大学環境理工学部研究報告
Published Date 1996-03
Volume volume1
Issue issue1
Start Page 181
End Page 192
ISSN 1341-9099
language English
File Version publisher
NAID 120002313591
JaLCDOI 10.18926/fest/11614
Title Alternative Preparation and Properties of ZnO Transparent Conductive Thin Films by Activated Reactive Evaporation Method
FullText URL 002_121_129.pdf
Author Fujiwara, Takashi| Fujii, Tatsuo| Nanba, Tokuro| Takada, Jun| Miura, Yoshinari|
Abstract Zinc oxide films were prepared on silica glass substrates by the use of an r.f. activated reactive evaporation (ARE) method, and were examined by X-ray diffraction (XRD) and scanning electron microscope (SEM). The electrical conductivity of the films and the doping effect of Al ions were also investigated. XRD measurements indicate that the films were c-axis oriented and that an r.f. plasma of Zn and O was necessary for the ZnO film deposition. Substrate temperature, oxygen gas pressure, evaporation rate, r.f. power and Al doping amount affect the c-axis orientation, the growth rate, the microstructure of the films and electrical conductivity. Optimum conditions with a fine texture of the surface and having good ctystallinity as well as good conductivity (≒10(-4)Ω・cm) were as follows : the substrate temperature; 200℃, the total evaporation rate; 1.0Å/s, the oxygen pressure; 2.0×10(-4) Torr, the r.f. power; 250W and the Al evaporation rare ratio; 2~6%. The films with 1.0×10(-3)Ω・cm were prepared at 50℃ for the substrate temperature.
Keywords ZnO film Al doped ZnO transparent conductive film r.f. activated reactive evaporation method
Publication Title 岡山大学環境理工学部研究報告
Published Date 1997-01-10
Volume volume2
Issue issue1
Start Page 121
End Page 129
ISSN 1341-9099
language Japanese
File Version publisher
NAID 120002313550
JaLCDOI 10.18926/fest/11612
FullText URL 002_107_120.pdf
Author Fujii, Hiroaki| Ofori Emmanuel| Shimada, Kiyoshi| Nishimura, Shin-ichi|
Abstract This paper discusses a numerical model that can be used to optimize the installation in a zoned type and a homogeneous type fill dam. Before installation in a real dam to evaluate dam behavior, numerical model described in this paper is carried out on a prototype dam to check the optimum installation, using cross arm measurements. Three cross arm installations at the upstream, the core and downstream to measure displacements are considered. The installation options considered are three cross arm combinations for best installation to verify the safety of dams and to reduce cost. Finite element method is used for generating the displecement field in a linear elastic numerical model. The generated data is used as an input data in the back analysis to check the adequacy of each installation option.
Publication Title 岡山大学環境理工学部研究報告
Published Date 1997-01-10
Volume volume2
Issue issue1
Start Page 107
End Page 120
ISSN 1341-9099
language English
File Version publisher
NAID 120002313925
JaLCDOI 10.18926/fest/11591
Title Alternative Evaluation of Liquefaction Resistance by In-situ Testing and Its Application to Reliability Design
FullText URL 005_145_151.pdf
Author Nishimura, Shin-ichi| Shimizu, Hideyoshi| Fujii, Hiroaki| Shimada, Kiyoshi|
Abstract A calculation method of probability of liquefaction is proposed in this paper. The spatial variability of soil parameters for the dynamic shear strength, i.e., N-values, median grain size, fines contents, and the statistical characteristics of the earthquake frequency are considered in the analysis. The standard penetration test (SPT) is convenient to estimate the spatial variability of the dynamic shear strength and mainly used in this study. Furthermore the determination of dynamic shear strength based on Swedish weight Sounding test also introduced here, because it is the simpler test than SPT. While the statistical model of the earthquake frequency is determined based on the record of historical earthquakes. Using this method the probability of liquefaction is calculated. The sand compaction pile method is considered for the ground improvement against the liquefaction. Finally, the relationship between the sand replacement rate and the probability of liquefaction is clarified.
Keywords probability of liquefaction reliability design spatial variability of soil parameters statistical model of earthquake frequency dynamic shear strength
Publication Title 岡山大学環境理工学部研究報告
Published Date 2000-02-29
Volume volume5
Issue issue1
Start Page 145
End Page 151
ISSN 1341-9099
language Japanese
File Version publisher
NAID 120002314022
JaLCDOI 10.18926/fest/11569
FullText URL 005_071_079.pdf
Author Jafar Ali Mohammad| Takeshita, Yuji| Fujii, Hiroaki|
Abstract In-situ determination of fundamental hydraulic parameters like variably saturated hydraulic conductivity (K(FS)) and the matric flux potential (Φ(m)) provides a foundation from which several other unsaturated soil parameters can be estimated, namely the Alpha (α*) parameter. This Alpha parameter is the one of the components of 3D unsaturated flow in vadose zone and its value is the measure of the capillary component of unsaturated flow pattern. Here an in-situ technique, Pressure Infiltrometer is introduced to record the steady flow rate applying a constant positive head on an unsaturated soil surface. The aim of this paper is to check the shape factor of 3D flow geometry and to find out its sensitivity on other unsaturated hydraulic parameters and to find out the influence of Alpha parameters on the results of the in-situ estimation of field-saturated hydraulic conductivity.
Keywords Field-saturated hydraulic conductivity Matric flux potential Alpha parameter Shape factor In-situ test
Publication Title 岡山大学環境理工学部研究報告
Published Date 2000-02-29
Volume volume5
Issue issue1
Start Page 71
End Page 79
ISSN 1341-9099
language English
File Version publisher
NAID 120002313869
JaLCDOI 10.18926/fest/11565
Title Alternative An Analysis on the Structure of Evaluating Street Landscape Through Semantic Differential Technique
FullText URL 003_063_074.pdf
Author Inouye, Hiroshi| Fujii, Makiko|
Abstract The structure on the evaluation of street landscape by men is analyzed through semantic differential technique. Some characteristic streets in Okayama and Kurashiki cities are selected for the analysis and they are evaluated by many subjects using their photographs. The results are outlined on their profile curves. Then, they are analyzed through factor analysis and some communal factors are induced. It is explained what these communal factors mean. Finally, it is considered how to make beautiful and comfortable street landscape.
Publication Title 岡山大学環境理工学部研究報告
Published Date 1998-01-14
Volume volume3
Issue issue1
Start Page 63
End Page 74
ISSN 1341-9099
language Japanese
File Version publisher
NAID 120002313379
JaLCDOI 10.18926/fest/11539
Title Alternative One-dimensional Compression Tests of Sludge Cake from Dredged Sludge
FullText URL 006_085_097.pdf
Author Wakitani, Yoshiaki| Fujii, Hiroaki| Nishimura, Shin-ichi| Inoue, Takashi|
Abstract One-dimensional compression tests were performed to investigate compression characteristics of sludge cake used as a construction material. The sludge cake is dewatering product of dredged sludge from the bottom of a lake. The test results show following compression characteristics. (1) For the undisturbed samples, e-log p curves show compressibility of overconsolidated clay ordinatily observed. (2) For the disturbed samples, there observed compressibility close to that of ordinary normally consolidated clay. (3) For the recompressed samples, there observed two turning points on e-log p curve. The compression presures(p(c1) and p(c2)) at those points for the unsubmerged tests have a linear correlation with the recompression pressure(p(s)). The submerged tests give very small values of p(c1) and p(c2) compared with the case of unsubmerged test. (4) For the recompressed samples, the first compression index(C(c1)) after p(c) has a linear correlation with the initial void ratio(e(0)), and the second compression index(C(c2)) shows almost constant value.
Keywords sludge cake one-dimensional compression test e~log p curve compression index void ratio
Publication Title 岡山大学環境理工学部研究報告
Published Date 2001-02-28
Volume volume6
Issue issue1
Start Page 85
End Page 97
ISSN 1341-9099
language Japanese
File Version publisher
NAID 120002313853
JaLCDOI 10.18926/fest/11528
Title Alternative Damage factors analysis for small embankment dams due to the Hyogoken-Nambu earthquake special to Hokudan Town
FullText URL 007_055_074.pdf
Author Fujii, Hiroaki| Kunimasa, Kana| Nanba, Akiyo| Yokomizo, Takayuki| Nishimura, Shin-ichi| Shimada, Kiyoshi| Hori, Toshio| Nishiyama, Tatsuro| Wakitani, Yoshiaki|
Abstract This study was performed to clarify which factors affected damage to take-ike (small embankment dams for irrigation in Japanese) of Hokudan Town on Awaji Island in western Japan due to Hyogoken-Nambu earthquake. Multivariate and ordinary statistical analysis were carried out using documentary data (181 damaged and 328 undamaged dams), and ordinary one was done for the results investigated in situ. The model for the multivariate analysis was created with 13 items and 94 categories for 4 groups (Location, Geology Structure, and History of Dam). As a result, the factors causing to damage for dam are (1) the nearest fault (Nojima, Mizukoshi and D2), (2) embankment volume (the larger the more), (3) angle of crest axis to epicenter (diagonal and normal), (4) distance to the nearest fault (less than 500 m), (5) distance to the epicenter (8 to 14 km which almost agree to the location of seismic intensity 7 JMA), (6) play view of dam axis (3 or 4 axes), (7) angle of crest axis to nearest fault (diagonal and normal), (8) elevation of dam site (over 100 m), (9) surface geology of dam site (non-cohesive soil), (10) era of construction (prior to 1891), and (11) soil properties of embankment (constructed of sand, smaller penetration resistance).
Keywords Earth dam earthquake damage site investigation statistical analysis case study
Publication Title 岡山大学環境理工学部研究報告
Published Date 2002-03-22
Volume volume7
Issue issue1
Start Page 55
End Page 74
ISSN 1341-9099
language Japanese
File Version publisher
NAID 120002314039
Author Fujii, Akihito|
Published Date 2006-03-24
Publication Title
Content Type Thesis or Dissertation
JaLCDOI 10.18926/bgeou/9816
FullText URL 098_0013_0021.pdf
Author Yamanaka, Yoshikazu|
Abstract 備中吉備津神社の神職であった藤井高尚(明和元、1764年~天保11、1840年)は、鈴屋門の高足として本居宣長の学問を継承した近世後期を代表する国学者の1人である。『伊勢物語新釈』や『古今和歌集新釈』などの古典研究、および『消息文例』や『松の落葉』といった文章作法書や随筆の執筆などからもわかるように、高尚の国学はおおむね宣長学の歌文の領域を継承したものとされている。しかし、そのなかで『浅瀬のしるべ』は「世人の教えとなるべき諺四十八条を取り上げそれらに託しつつ、著者の日頃の所懐を得意の雅文で綴った」一種の教訓本の体裁をとり、高尚の著作としては異色の部類に属するものである。藤井高尚の国学に関して、筆者はこれまで3回にわたり、本研究集録に「化政期国学の一断面」と題する論考を掲載し、藤井高尚の国学の教化論的性格についての考察を行った。しかし、それらの論考は幾分論点が多岐にわたり、その結果焦点が拡散したうらみがあった。そこで本稿において改めて先の3論考の内容を集約するとともに、藤井高尚の国学の教化論的性格を化政期の教訓をめぐる状況の中に位置づけておきたい。
Keywords 藤井高尚 備中吉備津神社 本居宣長 教化論
Publication Title 岡山大学教育学部研究集録
Published Date 1995-03-15
Volume volume98
Start Page 13
End Page 21
ISSN 0471-4008
language Japanese
File Version publisher
NAID 110000129647
JaLCDOI 10.18926/bgeou/9553
FullText URL 096_0061_0075.pdf
Author Yamanaka, Yoshikazu|
Abstract 本節においては、まずはじめに高尚の国学の全体像をとらえ、次いで『浅瀬のしるべ』における高尚の諺解釈の分析を通して高尚の国学に見られる教化意識の特質を検討し、最後に『道のしるべ』のなかに展開される「神ノ道ノ教」に基づく教化論の特質を、人間像を中心に考察していくこととする。
Keywords 化政期国学 藤井高尚 教化論
Publication Title 岡山大学教育学部研究集録
Published Date 1994-07-15
Volume volume96
Start Page 61
End Page 75
ISSN 0471-4008
language Japanese
File Version publisher
NAID 110000129614