Conditions

close

result 2585 件

Author Satoh, Toru|
Published Date 1988
Publication Title 岡山医学会雑誌
Volume volume100
Issue issue5-6
Content Type Journal Article
Author Inokuchi, Ikuo| Masuda, Yu| Takatsuka, Mayu| Ogura, Yoshio| Fujimoto, Akiko|
Published Date 1987-06-30
Publication Title 岡山医学会雑誌
Volume volume99
Issue issue5-6
Content Type Journal Article
Author Suga, Masakazu|
Published Date 1988
Publication Title 岡山医学会雑誌
Volume volume100
Issue issue3-4
Content Type Journal Article
Author Matsubara, Hitoshi|
Published Date 1987-04-30
Publication Title 岡山医学会雑誌
Volume volume99
Issue issue3-4
Content Type Journal Article
JaLCDOI 10.18926/15838
FullText URL Mem_Sch_Eng_OU_21_2_9.pdf
Author Kawara Osami| Nasu Kiyotaka|
Abstract This study dealt with the characteristics of hydrodynamics of Kojima Lake and the influence of a regional sewage treatment system in construction on the lake. Clockwise and anticlockwise circulations are caused by seasonal winds in summer and winter, respectively. The distribution of a conservative material continuously discharged off the shore of the sewage treatment plant is scarcely affected by seasonal winds and river discharges. The sewage treatment system improves the water quality of the lake except T-N.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1987-03-05
Volume volume21
Issue issue2
Start Page 9
End Page 19
ISSN 0475-0071
language English
File Version publisher
NAID 120002307442
JaLCDOI 10.18926/15832
FullText URL Mem_Sch_Eng_OU_21_1_57.pdf
Author Sakata Kenji| Kohno Iichiro|
Abstract New prediction equations of shrinkage and creep of concrete are proposed, and the efficiency of the new equations are investigated through a number of experimental data. Furthermore,the characteristics and applications of the prediction equations presented in the codes of many countries are also discussed. The results showing that the new equations could estimate shrinkage and creep of concrete within a certain measure of accuracy were obtained.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1986-11-15
Volume volume21
Issue issue1
Start Page 57
End Page 70
ISSN 0475-0071
language English
File Version publisher
NAID 120002307146
JaLCDOI 10.18926/15830
FullText URL Mem_Sch_Eng_OU_21_1_31.pdf
Author Totsuji Hiroo|
Abstract Surface properties of classical one-component plasma are investigated by numerical experiments on the system with periodicity in two directions perpendicular to the planar surface. The density profile, the electrostatic potential, the electric field, and the surface energy are obtained for intermediate values of the coupling parameter of bulk part r and compared with earlier experiments on spherical system. For r=10, the surface energy is almost the same as earlier result. For r =1, however, the surface energy is reduced about a factor of 2. The consistency of experimental values of the potential with the exact relation is checked and necessity of large system size is pointed out.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1986-11-15
Volume volume21
Issue issue1
Start Page 31
End Page 43
ISSN 0475-0071
language English
File Version publisher
NAID 120002307599
JaLCDOI 10.18926/15829
FullText URL Mem_Sch_Eng_OU_21_1_17.pdf
Author Akagi Fumio| Osaki Hirokazu|
Abstract Assembly line balancing is to assign work elements to serial work stations so as to make the work content at each station as close as possible to one limiting cycle time or pitch time, i.e., an upper time limit over every station. Until now, it is usually assumed that the performance rates of work stations are constant. But in practice the performance abilities of workers, machines or robots are varied by their own working conditions. Then the actual station times are different from standard ones, and consequently the line balance may diminish in many cases. Therefore in this paper, we propose an improved balancing method, in which work elements can be assigned to the work station having the upper time limit changed by its performance rate or ability. Further we develop the computer program of the proposed method and provide an illustrative problem and computational results. In an application of our method to the practical problems, it is shown that the actual efficiency of the production line becomes near that planned.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1986-11-15
Volume volume21
Issue issue1
Start Page 17
End Page 30
ISSN 0475-0071
language English
File Version publisher
NAID 120002307409
JaLCDOI 10.18926/15826
FullText URL Mem_Sch_Eng_OU_17_2_1.pdf
Author Nakanishi Sen-ichiro| Katsuyama Yoshiaki| Himei Toyoji|
Abstract The paper presents the computer aided design (CAD) method, the program, the design and the experimental results of inverse parallel thyristor phase control circuits. The calculated values agree well with the measured. The CAD program contains the next two methods which are inquired carefully by authors, such as (i) the optimization by SUMT (Sequential Unconstrained Minimization Technique) method, and (ii) the combined use of the gradient and the cramp calculation methods.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1983-06-30
Volume volume17
Issue issue2
Start Page 1
End Page 14
ISSN 0475-0071
language English
File Version publisher
NAID 120002307323
JaLCDOI 10.18926/15817
FullText URL Mem_Sch_Eng_OU_17_1_41.pdf
Author Mori Chuji| Hattori Susumu| Hamate Shinya|
Abstract The algorithm of automatic stereo plotting by iterative image correlation from aerial photographs and the corresponding empirical tests are described. The algorithm is oriented to off-line process, using a image scanner and a general purpose computer, and consists of 3 hierarchical correlation steps, based on one-dimensional matching using usual correlation maximum. For the correlation calculation, the FFT is effectively used. Though some defects exist in the algorithm at present, close contour plotting to middle scale maps is available except in hilly regions, in which marked features in ground covers do not exist.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1983-02-25
Volume volume17
Issue issue1
Start Page 41
End Page 60
ISSN 0475-0071
language English
File Version publisher
NAID 120002307285
JaLCDOI 10.18926/15816
FullText URL Mem_Sch_Eng_OU_17_1_15.pdf
Author Himei Toyoji| Nakanishi Sen-ichiro| Funabiki Shigeyuki| Komatsubara Hitoshi| Kurose Osamu|
Abstract An ac phase control circuit by thyristor is widely used in industry, The characteristics of the singlephase circuit with series RLC elements are numerically analyzed, and is reported the interesting phenomenon of step-up voltage without transformer. However, the performance of three phase phase control circuit with series RLC elements is not made clear. In this paper, the performance of three-phase control circuit of a balanced and an unbalanced load with series RLC elements is described. The analytical programs with each load are developed, and it is clarified that the calculated by this analytical program agree well with the measured. The calculated results, e.g. waveforms, RMS values of voltage and current, power, and power factor are illustrated and discussed the step-up phenomenon in three phase.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1983-02-25
Volume volume17
Issue issue1
Start Page 15
End Page 40
ISSN 0475-0071
language English
File Version publisher
NAID 120002307185
JaLCDOI 10.18926/15804
FullText URL Mem_Sch_Eng_OU_16_2_1.pdf
Author Yokoyama Fumiyoshi|
Abstract A deconvolution method for the X-ray diffraction line profile is proposed, which is based on the conventional least-squares method. The true profile is assumed to be a functional form. The numerical values of parameters of the function assumed are determined so that the calculated profile, which is a convolution of the function and the instrumental profile, has a minimum deviation from the observed one. The method is illustrated by analysis of the X-ray powder diffraction profile of sodium chloride 222 reflexion under the assumption that the true profile is a Gaussian or a Cauchy function.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1982-03-29
Volume volume16
Issue issue2
Start Page 1
End Page 16
ISSN 0475-0071
language English
File Version publisher
NAID 120002307445
JaLCDOI 10.18926/15795
FullText URL Mem_Sch_Eng_OU_16_1_65.pdf
Author Kohno Iichiro| Nishigaki Makoto|
Abstract The purposes of this research is an investigation of the intrusion of sea water into coastal aquifers. For this subject, this paper deals with proposing rational methods of getting diffusion coefficient and dispersion parameter for flow in porous media in a laboratory. These parameters of soil are indispensable in order to apply an analytical approach or a numerical approach to actual salt water intrusion problems. Experimental apparatuses were constructed and test procedures were also developed to measure concentration behaviors in a saturated porous media by using electro conductivity probe. As the results, the diffusion coefficients for the Toyoura standard sand and the Asahi river sand determined by two methods, that is, "Boltzman's transformation method" and "Instantaneous profile analysis method". The longitudinal coefficient of dispersion for one-dimensional flow was also determined by the least squares curve fitting method with a function of a certain range of seepage velocity.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1982-03-01
Volume volume16
Issue issue1
Start Page 65
End Page 89
ISSN 0475-0071
language English
File Version publisher
NAID 120002307205
JaLCDOI 10.18926/15793
FullText URL Mem_Sch_Eng_OU_16_1_47.pdf
Author Mori Chuji| Hattori Susumu| Tanabe Hiroshi|
Abstract A practical example of digital rectification of tilted photographs using a drum scanning micro densitometer and general purpose computers is depicted. The present research covers rectification of projective distorsions, occuring when the camera axis is not truly vertical, and affine distorsions due to curvature of a drum of a scanner. For this purpose, fundamental mathematical expressions were derived. And some pixel interpolation methods necessary for image reconstruction were compared experimentally. The examples revealed, however, that the film was deformed so complexly that they could not be corrected sufficiently only by affine transformation. Accuracy of rectification was checked by use of stereo aerial photographs in terms of residual y-parallaxes. The result showed residual y-parallaxes of ± 1 pixel (± 50 μm) and sometimes ± 2 pixels were observed. They seem to be caused mainly by film deformations which have not been eliminated, and their amount seems to exceed the photogrammetric tolerance.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1982-03-01
Volume volume16
Issue issue1
Start Page 47
End Page 64
ISSN 0475-0071
language English
File Version publisher
NAID 120002307893
JaLCDOI 10.18926/15792
FullText URL Mem_Sch_Eng_OU_19_2_1.pdf
Author Yokoyama Fumiyoshi| Monobe Kazuo|
Abstract The phase transition of urea complexes whose guest components range from n-paraffin to polyethylene was investigated by DSC thermal analysis. The transition temperatures increased with increasing the chain length; the related heats did not change much with the chain length. An X-ray powder diffractometry for urea-polyethylene complex revealed that the complex undergoes the same kind of phase transition between orthorhombic and hexagonal as urea-n-paraffin complex. The transition is interpreted in terms of an order-disorder transition with respect to the orientation of the guest molecule.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1985-02-25
Volume volume19
Issue issue2
Start Page 1
End Page 11
ISSN 0475-0071
language English
File Version publisher
NAID 120002307831
JaLCDOI 10.18926/15785
FullText URL Mem_Sch_Eng_OU_19_1_33.pdf
Author Taniguchi Takeo| Soga Akira|
Abstract Numerical error in the solution of the band matrix method based on the elimination method in single precision is investigated theoretically and experimentally, and the behaviour of the truncation error and the roundoff error is clarified. Some important suggestions for the useful application of the band solver are proposed by using the results of above error analysis.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1984-11-26
Volume volume19
Issue issue1
Start Page 33
End Page 44
ISSN 0475-0071
language English
File Version publisher
NAID 120002307352
JaLCDOI 10.18926/15772
FullText URL Mem_Sch_Eng_OU_15_2_55.pdf
Author Hida Moritaka| Matsumori Nobuo| Terauchi Hikaru|
Abstract X-ray diffuse scatteing intensity measurement has been carried out for the Al-3,82% Cu single crystal in which GP (2) zones are found. The two dimensional equiintensity contour maps in h(1) h(2) 0 plane are obtained from surveying around several reflections. The diffuse intensity around 2 1 0 reflection, which shows a cross like streak, is carefully examined. Warren-Cowley short-range order parameters, a(i), are estimated from the diffuse intensities around 2 1 0 reflection. The component of the intensities coming from atomic displacements was subtracted from the total diffuse intensity. It is found that the equi-intensity contours after the correction of the atomic displacements shows an anisotropic distribution and the GP(2) zone is an ellipsoid with a modified layer structure.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1981-03-30
Volume volume15
Issue issue2
Start Page 55
End Page 67
ISSN 0475-0071
language English
File Version publisher
NAID 120002307124
JaLCDOI 10.18926/15768
FullText URL Mem_Sch_Eng_OU_18_1_57.pdf
Author Ohzuku Tsutomu| Sawai Keijiro| Hirai Taketsugu|
Abstract Basic kinetic equations of chronopotentiometric potential-time curves, in which the equations for reversible, quasi-reversible and irreversible electron transfer process appeared in special cases, were given and a chronopotentiometric method for determining kinetic parameters was proposed therefrom. The method was demonstrated for Fe(3+)/Fe(2+) redox reaction in acidic aqueous media. The limitations of the method and the double-layer charging effects on the potential-time curve were discussed. The extension of the method to more general electrode processes was also considered.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1984-03-30
Volume volume18
Issue issue1
Start Page 57
End Page 73
ISSN 0475-0071
language English
File Version publisher
NAID 120002307985
JaLCDOI 10.18926/15767
FullText URL Mem_Sch_Eng_OU_18_1_43.pdf
Author Ohzuku Tsutomu| Hirai Taketsugu|
Abstract An equation on the current-polarization voltage characteristics of single charge transfer redox reaction on a rotating disk electrode (RDE) was given and a curvefitting method to determine kinetic parameters from an observed polarization curve was proposed therefrom. The method was demonstrated for Fe(2+)/Fe(3+)redox reaction in acidic aqueous electrolyte on Pt-RDE and the limitation of the method was discussed. The extension of the method to multistep charge transfer reaction was also considered.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1984-03-30
Volume volume18
Issue issue1
Start Page 43
End Page 56
ISSN 0475-0071
language English
File Version publisher
NAID 120002307914