Conditions

close

result 3122 件

JaLCDOI 10.18926/15615
FullText URL Mem_Sch_Eng_OU_3_107.pdf
Author Takeda Akira| Torii Sigeru| Oka Hirotosi|
Abstract The electrochemical oxidation of trans-cinnamic acid in a mixed aqueous solution of acetic acid and methanol containing potassium hydroxide was studied. The separation of ketones and aldehydes from the neutral materials using Girard reagent P gave benzaldehyde, tolualdehydes, acetophenone, methylacetophenones, propiophenone, phenacyl acetate, and phenacyl alcohol. The mechanism of the anodic reaction of trans-cinnamic acid has been discussed.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1968-09-01
Volume volume3
Issue issue1
Start Page 107
End Page 112
ISSN 0475-0071
language English
File Version publisher
NAID 120002307863
JaLCDOI 10.18926/15585
FullText URL Mem_Sch_Eng_OU_2_84.pdf
Author Monobe Kazuo| Yamashita Yuhiko|
Abstract The preparative method of giant single crystals of PEO and the experimental results of them by x-ray diffraction and electron microscopy are described. The crystallization of PEO was carried out in a two dimensional crystallization apparatus. From the tridirectional x-ray diffraction patterns on the resulting platelike crystals, it was confirmed that these crystals have a single crystal-like orientation at high supercoolings, the [401] axis is parallel to a growing direction and the [001] axis is perpendicular to the wide surface, and a double orientation at low supercoolings, two axes of [421] and [421] are parallel to a growing direction and the [001] axis is perpendicular to the wide surface.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1967-04-01
Volume volume2
Issue issue1
Start Page 84
End Page 87
ISSN 0475-0071
language English
File Version publisher
NAID 120002307197
JaLCDOI 10.18926/15566
FullText URL Mem_Sch_Eng_OU_2_12.pdf
Author Mizumoto Hisao|
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1967-04-01
Volume volume2
Issue issue1
Start Page 12
End Page 19
ISSN 0475-0071
language English
File Version publisher
NAID 120002307145
JaLCDOI 10.18926/15563
Title Alternative DIRECT COLORIMETRIC AND DIRECT TITRIMETRIC DETERMINATION OF CALCIUM WITH NEW REAGENT (SUPPLEMENTARY REPORT)
FullText URL 006_015_019.pdf
Author Ashizawa, Takashi|
Abstract The author improved the accuracy of the direct colori metric method of calcium determination with azocal-A using an electrophotometer and made an investigation of interfering ions concerning this method. With this improved method calcium content of 0.2-several mgs per liter can be determined using only 5cc. of river water sample with an error of 土10%. Only 2 minutes are enough for a single determination and this method surpassed the ordinary oxalate method in accuracy.
Publication Title 岡山大学温泉研究所報告
Published Date 1952-03
Volume volume6
Start Page 15
End Page 19
ISSN 0369-7142
language Japanese
File Version publisher
NAID 120002307466
JaLCDOI 10.18926/15555
FullText URL Mem_Sch_Eng_OU_1_110.pdf
Author Takamatsu Takeiciro| Sayama Hayatoshi| Tonoike Takao|
Abstract The batch chemical reaction is chosen as the process model to be optimized and the rate constants are functions of pressure only, as the reactions are assumed to occur isothermally. The time optimal control problem considered here means to determine the minimum time path from the given initial compositions to desired final compositions by manipulating the process pressure. A gradient method or a steepest-ascent method is applied to determine the control variable program by using the high speed digital computer. Numerical solutions are presented for the following three cases: (1) no constraint on the operating pressure ...... open and matched terminal constraint. (2) constraint on the operating pressure ...... open terminal constraint. (3) constant operating pressure ...... open terminal constraint.
Publication Title Memoirs of the School of Engineering, Okayama University
Published Date 1966-03-31
Volume volume1
Issue issue1
Start Page 110
End Page 115
ISSN 0475-0071
language English
File Version publisher
NAID 120002307978
JaLCDOI 10.18926/15519
Author 大島 良雄|
Publication Title 放射能泉研究所報告
Published Date 1949-12
Volume volume2
Start Page 1
End Page 19
language Japanese
File Version publisher
NAID 40017532935
Author Matsubara, Fumie| Inoue, Taeko| Kitani, Hikaru| Tanizaki, Yoshiro|
Published Date 1994-09
Publication Title 岡大三朝分院研究報告
Volume volume65
Content Type Data or Dataset
JaLCDOI 10.18926/15472
FullText URL Mem_Fac_Eng_OU_23_2_9.pdf
Author Kuroda Tsutomu| Osaki, Hirokazu| Matsuda, Masaaki| Fujisawa Keita|
Abstract Multi-item flexible manufacturing systems have been spread to correspond the short life-cycle and the diversification of products. Part handling plays an important role to operate multi-functional robot efficiently in these systems, and many jigs are widely used to hold a part. They should be exchanged at once according to changing products. In this paper, we propose a pin jig which holds a part with two pins, and design method of the position, length and diameter of those pins for a cylindrical part. This jig has the following characteristics. As a surface of the jig is inclined to use gravity, the part can be fixed without any external forces. Therefore the structure of jig becomes simple, and loading and unloading of a part becomes easy for a robot hand.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1989-03-30
Volume volume23
Issue issue2
Start Page 9
End Page 19
ISSN 0475-0071
language English
File Version publisher
NAID 120002307693
JaLCDOI 10.18926/15403
FullText URL Mem_Fac_Eng_OU_27_2_19.pdf
Author Nara, Shigetoshi| Totsuji, Hiroo|
Abstract Numerical simulations of a single layer recurrent neural network model in which the synaptic connection matrix is formed by summing cyclic products of succesive patterns show that complex dynamics can occur with the reduction of a connectivity parameter which is the number of connection between neurons. The structure in these dynamics is discussed from the viewpoint of realizing complex function using complex dynamics.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1993-03-25
Volume volume27
Issue issue2
Start Page 19
End Page 40
ISSN 0475-0071
language English
File Version publisher
NAID 120002307451
JaLCDOI 10.18926/15378
FullText URL Mem_Fac_Eng_OU_35_191.pdf
Author Yoshida Takanobu| Munesawa, Yoshiomi| Osaki, Hirokazu| Kajihara, Yasuhiro| Ohta Kazuharu|
Abstract We developed the disassembly system that uses the impulsive load and disassembly tools to disassemble used appliances economically. The main components of this system are impulse hammer, a lift table and developed disassembly tools. Several types of disassembly tools are developed to punch out fastened portion on a part and cut off the shaft of screw or connection pin of IC-chip. A simulation model is proposed to explain and formulate how the fastening point of product is broken and cut. Three kinds of disassembly tools are designed. The actual disassembly system is developed by using proposed simulation models and disassembly tools.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2001-03-27
Volume volume35
Issue issue1-2
Start Page 191
End Page 196
ISSN 0475-0071
language English
File Version publisher
NAID 120002307328
JaLCDOI 10.18926/15369
FullText URL Mem_Fac_Eng_OU_30_1_19.pdf
Author Nakamura, Takao| Yamamoto, Yoshitake|
Abstract This paper describes a new measurement method and principle of detection of biodynamics using bioelectrical impedance method based on four-electrode technique with sinusoidal constant current. This method uses a human body itself as a part of the sensor. First, we show a bioelectrical impedance measuring device and the change of bioelectrical resistance is measured in human movement. Second, we proposes a principle of detection of biodynamics based on correspondence of magnitude, form and stability of movement to impedance waveform. Hence we can use this method for the judgement of sports skill using the impedance characteristics.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1995-12-28
Volume volume30
Issue issue1
Start Page 19
End Page 24
ISSN 0475-0071
language English
File Version publisher
NAID 120002307151
JaLCDOI 10.18926/15359
FullText URL Mem_Fac_Eng_OU_34_19.pdf
Author Okada, Akira| Uno, Yoshiyuki| Okajima, Isao|
Abstract In EDM, the machining characteristics greatly depend on the energy distribution. Therefore, it is very important to clarify the energy distribution for understanding various phenomena in EDM. In this paper, the energy distribution in EDM with graphite electrode is investigated by measuring the temperatures of electrode and workpiece. Experimental analysis shows that the material removal rate depends on energy density while the electrode wear greatly depends on the adhesion of heat resolved carbon from machining fluid, and the energies distributed into electrode and workpiece are almost constant regardless of pulse duration.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2000-03-27
Volume volume34
Issue issue1-2
Start Page 19
End Page 26
ISSN 0475-0071
language English
File Version publisher
NAID 120002307707
JaLCDOI 10.18926/15346
FullText URL Mem_Fac_Eng_OU_35_9.pdf
Author Abe, Takeji| Tsuboi, Tomoaki|
Abstract The evaluation of microscopic inhomogeneity of polycrystalline aluminum is performed by measuring the hardness in respective grains. The recently developed ultra-micro hardness tester is used and the effects of the test pattern, the indentation load and the indenting velocity are examined. Then, the relationship between the increase in the hardness caused by the work hardening and the deformation of respective grains are statistically investigated. The hardness testing mode in which the initial load is applied before the onset of measurement gives more stable results than the testing mode without the initial load. The test condition with the indentation load of 9.8mN and the indentation velocity of 0.2 μm/sec seems to be optimum and gives the least dispersion of the measured values in grains. It is shown that the hardness values of respective grains in polycrystalline aluminum as well as their dispersion increase with the applied plastic strain. Discussion is made on the microscopic deformation behavior of polycrystalline aluminum.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2001-03-27
Volume volume35
Issue issue1-2
Start Page 9
End Page 19
ISSN 0475-0071
language English
File Version publisher
NAID 120002307825
Author Matsubara, Fumie| Endou, Hiroi| Inoue, Taeko| Kitani, Hikaru| Tanizaki, Yoshiro|
Published Date 1993-06
Publication Title 岡大三朝分院研究報告
Volume volume64
Content Type Data or Dataset
JaLCDOI 10.18926/15328
Title Alternative Relationship between bone mineral densities of second metacarpal bone and lumber spine
FullText URL 063_099_105.pdf
Author Nakai, Mutsuo| Okuda, Hiroyuki| Akiyama, Tsuneo| Takatori, Akimasa| Tanizaki, Yoshiro|
Abstract QCTおよびDIP法による測定値の相関性について検討し,DIP法による腰椎骨塩量の推定および,スクリーニングへの適用について考察した。QCT値とΣGS/DやMClとの相関関係の検討では.対象のQCT値が低値か高値かによって相関関係がかなり異なることが明らかになった。すなわち,QCT値が低い領域は,QCT値と,ΣGS/DやMCIに明らかな正の相関関係が認められたが,一方, QCT値が高い領域では,相関関係は認められなかった。また,ΣGS/D=2.8mmAI以上,またはMCI=0.48以上の症例においては腰椎圧迫骨折の危険は小さく,ΣGS/D=1.8mmAI以下,またはMCI=0.24以下の症例においては腰椎圧迫骨折の危険が大きい可能性が示唆された。
Keywords 骨粗鬆症 (osteoporosis) 骨塩量 (bone mineral density) QCT (quantitative computed tomography) DIP法 (digital image processing method)
Publication Title 岡大三朝分院研究報告
Published Date 1992-06
Volume volume63
Start Page 99
End Page 105
ISSN 0913-3771
language Japanese
File Version publisher
NAID 120002307484
JaLCDOI 10.18926/15307
Title Alternative 気管支喘息におけるハウスダストアレルギー. 血清IgE値とIgE抗体価と年齢との関連
FullText URL 064_031_035.pdf
Author Tanizaki, Yoshiro| Kitani, Hikaru| Mifune, Takashi| Mitsunobu, Fumihiro| Kajimoto, Kazuhiro| Sugimoto, Keisuke| Yokota, Satoshi| Hiramatsu, Junichi| Ochi, Koji| Harada, Hideo| Tada, Shinya| Kimura, Ikuro|
Abstract Serum IgE levels and IgE antibody values in relation to patient age were examined in 50 patients with house dust mite (HDm) sensitive asthma, 1. IgE antibody values to HDm were highest in patients between the ages of 10 and 19, and the values generally low in those over the age of 40. 2. High IgE antibody values to HDm were accompanied by high serum IgE levels in patients between 10 and 19. IgE antibody values and serum IgE levels were in general low in patients over age 40. In patient under age 9, serum IgE levels were less than 500 IU/ml in 5 of the 10 subjects despite an increased value of IgE antibodies to HDm. These results suggest that an increased production of IgE antibodies to HDm is usually accompanied by an increased production of total IgE in younger subjects. However, an increase in production of IgE antibodies is not always related to an increase in production of total IgE in patients under age 9. The results also show that production of IgE antibodies to HDm and total IgE is in general low in older patients despite the hyperreactivity to HDm.
Keywords Serum IgE (血清IgE) IgE antibodies (IgE抗体) house dust mite (ダニ) bronchial asthma (気管支喘息)
Publication Title 岡大三朝分院研究報告
Published Date 1993-06
Volume volume64
Start Page 31
End Page 35
ISSN 0918-7839
language English
File Version publisher
NAID 120002307674
JaLCDOI 10.18926/15302
Title Alternative 気管支喘息における気道内リンパ球の出現とその意義.IgE系反応との関連について.
FullText URL 063_019_024.pdf
Author Tanizaki, Yosihiro| Kitani, Hikaru| Okazaki, Morihiro| Mifune, Takashi| Mitsunobu, Fumihiro| Tanimizu, Masakuni| Honke, Naoko| Kusaura, Yasuhiro| Kimura, Ikuro|
Abstract Relationship of the proportion of lymphocytes in bronchoalveolar lavage (BAL) fiutd to IgE-mediated reactions and to ventilatory function was studied in two age-matched asthma groups : group A of 11 subjects with BAL lymphocytes over 30% and group B of 11 subjects with BAL leyphocytes less than 10%. Of the eleven subjects in group A, 3 (27.3%) were atopic and 4 (36.4%) were non-atopic. The proportion of BAL lymphocytes in subjects with serum IgE level more than 300 IU/ml, who were all older than 50 years, was significantly higher than that in subjects with serum IgE less than 100 IU/ml in group A (p<0.05). While of the eleven subjects of group B, 5 (45.5%) were atopic and 4 (36.4%) were non-atopic. The value of % V(25) was significantly higher in the atopics compared with the non-atopics in group A (p<0.05), although no significant difference was found in the value of % V(25) between the two asthma types in group B. The results show that an increased number of lymphocytes in BAL fluid may be enhanced by IgE-mediated allergic reactions in the elderly, and that the decreased value of % V(25) may be associated withan increased number of lymphocytes in BAL fluid in non-atopics.
Keywords Lymphocytes (リンパ球) BAL fluid (BAL液) IgE antibody (IgE抗体) bronchial asthma (気管支喘息)
Publication Title 岡大三朝分院研究報告
Published Date 1992-06
Volume volume63
Start Page 19
End Page 24
ISSN 0913-3771
language English
File Version publisher
NAID 120002307202
JaLCDOI 10.18926/15239
Title Alternative The subjective lived experience that patients have with chronic renal disease
FullText URL 012_1_019_026.pdf
Author Idei, Fumiko| Kato, Kumiko|
Abstract 本研究では慢性腎疾患を有する若い成人の内的経験世界を検討した。5名の患者が疾病に関してどのようなことを経験しているのかについて非組織的な深層面接を受けた。分析の結果,患者の内的経験世界は,(1)患者が経験している感情や思考,(2)疾病や自己についての解釈,(3)重要な他者への信頼,(4)自己の変化と発達(成長)という4つに特徴づけられることが明らかになった。しかるべき質の高い看護を提供するためには,看護者は,患者の内的経験世界を理解することが必要である。
Keywords 慢性腎疾患 (Chronic renal disease) 青年後期 (Young adulthood) 主観的体験世界 (Subjective lived experience) 自己 (Self) 重要他者 (Significant others)
Publication Title 岡山大学医学部保健学科紀要
Published Date 2001-12-25
Volume volume12
Issue issue1
Start Page 19
End Page 26
ISSN 1345-0948
language Japanese
File Version publisher
NAID 120002307642
JaLCDOI 10.18926/15166
FullText URL Mem_Fac_Eng_OU_31_1_19.pdf
Author Totsuji, Hiroo| Kishimoto, Tokunari| Totsuji, Chieko|
Abstract As a model of dusty plasmas in external fields, Yuka.wa system in a one-dimensional external field is analyzed by molecular dynamics simulations and theoretical approaches. It is shown that particles form clear thin layers (sheets) at low temperatures and the number of layers changes discretely with characteristic parameters of the system, accompanying the rearrangements of whole system from nearly equipartitioned layers to also nearly equipartitioned layers. The number, positions and populations of layers are obtained as functions of characteristic parameters. The shell (sheet) model which has been successful for confined one-component plasmas is extended to this system and results of numerical experiments are reproduced to a good accuracy. The effect of cohesive energy in each layer is of essential importance to reproduce discrete changes in the number of sheets.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1996-12-27
Volume volume31
Issue issue1
Start Page 19
End Page 33
ISSN 0475-0071
language English
File Version publisher
NAID 120002307616
Author Wake, Hidenori|
Published Date 2009-08-03
Publication Title 岡山医学会雑誌
Volume volume121
Issue issue2
Content Type Journal Article