JaLCDOI 10.18926/14062
FullText URL Mem_Fac_Eng_OU_42_60.pdf
Author Kikuchi, Junji| Konishi, Masami| Imai, Jun|
Abstract In steel works, molten metals discharged from blast furnace are put into a pan for transportation called torpedo and transported to steel making factory by a locomotive. In molten metals transportation, it becomes issues to prevent temperature drop of molten metals for stable production of down stream plants to shorten transportation time. Therefore it is necessary to make an appropriate plan for molten metals transfer considering the production and the transportation simultaneously. In this paper, molten metals transfer planning method is proposed including production scheduling. That is, torpedo schedule, transfer request assignment and route plan of locomotives are optimized according to each objective.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 60
End Page 70
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308612
JaLCDOI 10.18926/14063
FullText URL Mem_Fac_Eng_OU_42_71.pdf
Author Kawase, Koichi| Konishi, Masami| Imai, Jun|
Abstract In this research, Fuzzy control theory is applied to the inventory control of the supply chain between multiple companies. The proposed control method deals with the amount of inventories expressing supply chain between multiple companies. Referring past demand and tardiness, inventory amounts of raw materials are determined by Fuzzy inference. The method that an appropriate inventory control becomes possible optimizing fuzzy control gain by using SA method for Fuzzy control. The variation of uncertain demand is given to the proposal method. Furthermore, the method of forecasting demand and the effectiveness of fuzzy control method are confirmed by numerical experiments. As the results, the proposal method suppressed increase in an unnecessary cost when demand varies.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 71
End Page 78
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308296
JaLCDOI 10.18926/14064
FullText URL Mem_Fac_Eng_OU_42_79.pdf
Author Notsu Tadafumi| Konishi, Masami| Imai, Jun|
Abstract The operations of a reactor furnace such as a blast furnace still depend on the experiences and intuitions of skilled operators due to the complexity of internal furnace phenomena and high temperature. There is a great demand for stable operations under the circumstances of a decrease in the number of skilled operators and difficulty in technology inheritance. This paper aims to construct mathematical description for control of a reactor furnace. Further, the linear-quadratic-gaussian control system for a reactor furnace is proposed, which estimates inner furnace temperature distribution using measured data near furnace wall. Temperature distribution of a furnace is controlled based on the estimated inner temperature distribution changing of boundary conditions of a furnace. The practicability of the proposed control method was checked through numerical experiments.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 79
End Page 90
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308624
JaLCDOI 10.18926/14065
FullText URL Mem_Fac_Eng_OU_42_91.pdf
Author Ryohei, Hamana| Konishi, Masami| Imai, Jun|
Abstract Various kind of productions are made in semiconductor fabrications, where it employs the production system with multiprocesses and multiple Automated Guided Vehicles(AGVs) for transportation. It is difficult to optimize planning of production and transportation simultaneously because of the complicated flow of semifinished products. This paper describes the formulations of production scheduling, transportation routing and sequence planning of material handling system, and algorithm for simultaneous optimization of plannings by using solution space reduction and simulated annealing method. In this paper, all production system is decomposed to the production scheduling problem, transportation routing problem by AGVs and sequence planning of material handling system with managing stockers and buffers. Production scheduling problem and transportation routing problem are solved by the optimization algorithm using the decomposition routing problem. Sequence planning of material handling robot problem is solved by the algorithm using simulated annealing method.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 91
End Page 103
ISSN 0475-0071
language 日本語
File Version publisher
NAID 120002308279
JaLCDOI 10.18926/14069
FullText URL Mem_Fac_Eng_OU_42_104.pdf
Author Donghui, MA| Torii, Tashiyuki| Shimizu, Kenichi| Matsuba, Akira|
Abstract As model specimens of surface film-bonded materials, pure copper films with a thickness of 100μm were bonded to the surface of steel base with epoxy resin, where the tensile residual stress was measured by an X-ray on the surface copper film. The distribution of initial electric resistance was measured on both copper film and base specimen by a direct current potential drop technique. As a result, there was a good agreement between the measured and theoretical values. From the fatigue testing results, it was shown that the measured electric resistance increased with the fatigue crack length on the copper film, which was almost equal to the theoretical value calculated for a central slit in a plate with finite width. This was probably because the fatigue crack was opened due to the tensile residual stress on the film even under unloading condition. In addition, the internal crack length during fatigue was examined by ultrasonic testing for the film-bonded specimen. As a result, there was a difference in the fatigue crack length between the surface copper film and the inner base.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 104
End Page 109
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308537
JaLCDOI 10.18926/14071
FullText URL Mem_Fac_Eng_OU_42_110.pdf
Author Nogami, Yasuyuki| Morikawa, Yoshitaka|
Abstract This paper shows a method for checking the parity of (#Jc − 1)/2 without calculating the order #Jc, where #Jc is the order of genus 2 or 3 hyperelliptic curve.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 110
End Page 114
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308489
JaLCDOI 10.18926/14059
FullText URL Mem_Fac_Eng_OU_42_48.pdf
Author Totsuji, Chieko| Miyake Takashi| Nakanishi Kenta| Tsuruta, Kenji| Totsuji, Hiroo|
Abstract Based on the mapping introduced by the classical-map hypernetted-chain (CHNC) method, classical numerical simulations, Monte Carlo and molecular dynamics, have been applied to the twodimensional electron fluid and the results are compared with those of quantum Monte Carlo simulations hitherto reported. It is shown that polarization properties of the ground state obtained by the diffusion Monte Carlo method are reproduced within the accuracy of quantum simulations by both of two mapping functions for the quantum temperature which have been proposed within the CHNC method. These results may serve as the basis of numerical simulations based on the CHNC method which are applicable to finite non-periodic systems like quantum dots and systems at finite temperatures.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 48
End Page 52
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308425
JaLCDOI 10.18926/14060
FullText URL Mem_Fac_Eng_OU_42_53.pdf
Author Chai Hong| Totsuji, Hiroo|
Abstract In order to transfer quantum information, the use of spin chains has been proposed and their transfer characteristics have been analyzed. As one of the latter, the maximum of the transfer probability over sufficiently long time period is often considered important and some examples with high maximum values have been given. In these examples, the coupling between neighboring spins are tuned so as to attain high efficiency. In this article, we discuss the effect of noise on the values of coupling constant. As a result, we propose a system where the efficiency is high and also the effect of noise is small.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 53
End Page 55
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308635
JaLCDOI 10.18926/14061
FullText URL Mem_Fac_Eng_OU_42_56.pdf
Author Miyake Takashi| Totsuji, Chieko| Nakanishi Kenta| Tsuruta, Kenji| Totsuji, Hiroo|
Abstract We analyze the ground state of the two-dimensional quantum system of electrons confined in a parabolic potential with the system size around 100. We map the system onto a classical system on the basis of the classical-map hypernetted-chain (CHNC) method which has been proven to work in the integral-equation-based analyses of uniform unbounded systems and then apply classical numerical simulations. We find that the confined system undergoes the transition to the spin polarized state with the decrease of the average density and the corresponding critical value is as low as rs ∼ 0.3 in terms of the usual rs parameter estimated for the average density. As the ground state for given value of the rs parameter, our data give the critical value for the transition around 20 which is consistent with the known possibility. The advantage of our method is a direct applicability to geometrically complex systems which are difficult to analyze by integral equations. The application to the structure like quantum dots reported here is the first example of such applications.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 56
End Page 59
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308633
JaLCDOI 10.18926/14056
FullText URL Mem_Fac_Eng_OU_42_18.pdf
Author Kanatani, Kenichi| Yasuyuki Sugaya|
Abstract We classify and review existing algorithms for computing the fundamental matrix from point correspondences and propose new effective schemes: 7-parameter Levenberg-Marquardt (LM) search, EFNS, and EFNS-based bundle adjustment. Doing experimental comparison, we show that EFNS and the 7-parameter LM search exhibit the best performance and that additional bundle adjustment does not increase the accuracy to any noticeable degree.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 18
End Page 35
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308468
JaLCDOI 10.18926/14053
FullText URL Mem_Fac_Eng_OU_42_1.pdf
Author Asatani Jun| Koumoto, Takuya| Toru Fujiwara| Tadao Kasami|
Abstract Two typical examples, the (32, 21, 6) and (64, 45, 8) extended code of primitive permuted BCH codes, are considered. The sets of minimum weight codewords are analyzed in terms of Boolean polynomial representation. They are classied by using their split weight structure with respect to the left and right half trellis sections, and for each class, the standard form is presented. Based on the results, we can generate a proper list of the minimum weight codewords of the codes.
Keywords Boolean polynomial representation extended BCH codes minimum weight codewords binary shift invariance property
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 1
End Page 9
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308333
JaLCDOI 10.18926/14058
FullText URL Mem_Fac_Eng_OU_42_44.pdf
Author Ogawa Takafumi| Tsuruta, Kenji| Totsuji, Chieko| Totsuji, Hiroo| Hiroshi Iyetomi|
Abstract To analyze vibrational properties of Si crystal with a single charge-neutral vacancy, we perform large-scale simulations based on tight-binding molecular-dynamics method. Vibrational modes and frequencies are obtained by diagonalizing dynamical matrix within a harmonic approximation. Results indicate that there exist vibrational modes spatially localized around the vacancy and large frequency shifts associated with the localized modes contribute significantly to reduction of the vibrational free energy.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 44
End Page 47
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308412
JaLCDOI 10.18926/17822
FullText URL Mem_Fac_Eng_OU_43_1.pdf
Author Shimizu, Kenichi| Torii, Tashiyuki| Ishida, Koki|
Abstract Using a fatigue testing method by which fatigue cracks can be initiated and propagated in a film adhered to cover an elliptical through-hole in a base plate subjected to push-pull cyclic loads, annealed copper films with the thickness of 100μm and those reduced the thickness from the 100μm to 50μm by an electro-polishing were fatigued under a constant stress amplitude with a stress ratio of zero. The crystal rotation behavior with the fatigue crack propagation was investigated by measuring the crystal orientation around the fatigue crack initiated from the notch root before and after fatigue testing, using EBSD (Electron Back-scatter Diffraction) method. Then, the change of crystal orientation with fatigue testing was evaluated quantitatively from the misorientation between the crystal orientation matrix on the same point obtained before and after fatigue testing. As a result, the angle of the crystal rotation obtained from the region showing the high fatigue crack propagation rate was larger than that obtained from the region showing the low fatigue crack propagation rate for the film with the thickness of 100μm, while the fatigue crack propagated faster in the film with the thickness of 50μm than that with the thickness of 100μm regardless of the small crystal rotation angles with the fatigue testing for the film with the thickness of 50μm.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 1
End Page 7
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308710
JaLCDOI 10.18926/17853
FullText URL Mem_Fac_Eng_OU_43_113.pdf
Author Sakemi, Yumi| Kato, hidehiro| Nogami, Yasuyuki| Morikawa, Yoshikawa|
Abstract Barreto–Naehrig (BN) curve has been introduced as an efficient pairing-friendly elliptic curve over prime field F(p) whose embedding degree is 12. The characteristic and Frobenius trace are given as polynomials of integer variable X. The authors proposed an improvement of Miller's algorithm of twisted Ate pairing with BN curve by applying X of small hamming weight in ITC–CSCC2008; however, its cost evaluation has not been explicitly shown. This paper shows the detail of the cost evaluation.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 113
End Page 116
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308945
JaLCDOI 10.18926/17851
FullText URL Mem_Fac_Eng_OU_43_108.pdf
Author Nekado, Kenta| Kato, Hidehiro| Nogami, Yasuyuki| Morikawa, Yoshitaka|
Abstract Recently, pairing-based cryptographies such as ID-based cryptography and group signature have been studied. For fast pairing calculation, not only pairing algorithms but also arithmetic operations in extension field must be efficiently carried out. The authors show efficient arithmetic operations of extension field for Xate pairing especially with Freeman curve.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 108
End Page 112
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308904
JaLCDOI 10.18926/17849
FullText URL Mem_Fac_Eng_OU_43_99.pdf
Author Kato, Hidehiro| Nogami, Yasuyuki| Morikawa, Yoshitaka|
Abstract A square root (SQRT) algorithm in extension field F(p(m))(m = r(0)r(1)・・・r(n−1)・2(d), r(i) : odd prime, d : positive integer) is proposed in this paper. First, a conventional SQRT algorithm, the Tonelli-Shanks algorithm, is modified to compute the inverse SQRT in F(p(2d)), where most of the computations are performed in the corresponding subfields F(p(2i)) for 0 ≤ i ≤ d-1. Then the Frobenius mappings with addition chain are adopted for the proposed SQRT algorithm, in which a lot of computations in a given extension field F(p(m)) are also reduced to those in a proper subfield by the norm computations. Those reductions of the field degree increase efficiency in the SQRT implementation. The Tonelli-Shanks algorithm and the proposed algorithm in F(p(6)) and F(p(10)) were implemented on a Core2 (2.66 GHz) using the C++ programming language. The computer simulations showed that, on average, the proposed algorithm accelerated the SQRT computation by 6 times in F(p(6)), and by 10 times in F(p(10)), compared to the Tonelli-Shanks algorithm.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 99
End Page 107
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308980
JaLCDOI 10.18926/17847
FullText URL Mem_Fac_Eng_OU_43_93.pdf
Author Ueno, Hirokazu| Morikawa, Yoshitaka|
Abstract This paper investigates the relation between error distribution and predictive order of minimum mean abusolute error predictors (MMAE predictors) designed for lossless coding of grayscale images. Design of MMAE predictors reduces to the linear programming problem. Let k be the number of coefficients in a predictor (predictor order), we imagine that predictor order k may have a distribution shaping effect. Main purpose of this paper is to ensure that k has such an effect.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 93
End Page 98
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308979
JaLCDOI 10.18926/17844
FullText URL Mem_Fac_Eng_OU_43_75.pdf
Author Ohe, Keita| Konishi, Masami| Imai, Jun|
Abstract As is well known, an advanced knowledge and know-how are needed in the design and the diagnosis work. Further, human experts can cope with the recent trend of customers needs. Therefore, the design and the diagnosis work have been privately performed in the past, and its information cannot be shared. In addition, the number of experts is decreasing. It is a very important problem to maintain and to extend experts technologies having been built up. For the purpose, methods and systems for technical inheritance of the advanced techniques of the skilled engineers are needed to train the unskilled operators and also can assist skilled operators. In this research, attention is focused on the design of analog filter circuit. To attain the target, the circuit structural classifier system to support design work is developed. Furthermore, simulation technology for hot strip rolling mills based on distributed agents is presented aimed to develop tools for the diagnosis of hot strip rolling mills operation.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 75
End Page 92
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308900
JaLCDOI 10.18926/17843
FullText URL Mem_Fac_Eng_OU_43_61.pdf
Author Kawamura, Mao| Konishi, Masami| Yamagata, Katuki| Shimomura, Koichi|
Abstract In this research, a Human Interface system is designed intended to mobile crane. The intervention of human is unavoidable to attain the high performance of electro mechanical system. As is known, crane operation is complicated. Recently, the decrease of expert person induced crane accident. So in near future, it is required a partial automation of crane operation and human support technology. We are aiming at the development of the operation support system for a crane. In this research, development of the hydro mechanical models representing both of static and dynamics movements are made. Further, actual experimental data of operating mobile crane, which are electrical signal data and three-dimension (3D) position of moving load is measured. The actual operating data are compared with the model and it is found that the developed electromechanical model can explain the behaviors of actual data.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 61
End Page 74
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308930
JaLCDOI 10.18926/17841
FullText URL Mem_Fac_Eng_OU_43_55.pdf
Author Inoue, Shinichiro| Konishi, Masami| Imai, Jun|
Abstract In this research, an image processing method and a system for inspection support of a rod figured cutting tool are developed. As is well known, the visual inspection of a cutting tool by image processing is not easy, because cutting blade have a helical blade structure. To cope with the problem, an experimental facility with rotation and longitudinal tool shift functions to enable acquisition of blade surface pictures along a cutting rod is developed. The type of the defect treated in this paper is the spot of coating on blade surface. To judge the quality of the processed image of blade surface, neural network with autonomous learning is used. The processed image of cutting tool is divided into 64 × 64 blocks used for the input to the neural networks. Before input, each block data is preprocessed applying a edge detection filter and a transformation by the discrete fourier transform (DFT). Using these technologies, the experimental inspection system is built and tested to check the capabilities of the inspection algorithms. The diagnostic performance of the surface defect of a cutting tool was confirmed. There remained a problem to mis judge the normal tools as the defect.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 55
End Page 60
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308973