Author Faculty of Engineering, Okayama University|
Published Date 2001-12
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Volume volume36
Issue issue1
Content Type Others
Author Faculty of Engineering, Okayama University|
Published Date 2002-03
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Volume volume36
Issue issue2
Content Type Others
Author Faculty of Engineering, Okayama University|
Published Date 2002-03
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Volume volume36
Issue issue2
Content Type Others
JaLCDOI 10.18926/46947
FullText URL mfe_38_1-2_005_014.pdf
Author Ishimaru, Kazuhito| Konishi, Masami| Imai, Jun| Nishi, Tatsushi|
Abstract Temperature distribution in the reactor furnace is mainly operated by gas blowing from multiple tuyeres and material charge distribution. The objective of our research is obtain the optimal profile of gas flow to control temperature distribution in the reactor furnace in the shortest possible time. We formulated the optimization problem to reduce deviation of temperature distribution from its desired one in the reactor furnace. Based on the formulation, gas blow conditions are optimized by a sequential quadratic programming method to realize the desired temperature distribution. The validity of the method was checked through numerical experiments.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2004-03
Volume volume38
Issue issue1-2
Start Page 5
End Page 14
ISSN 0475-0071
language 英語
File Version publisher
NAID 80016785933
JaLCDOI 10.18926/44495
FullText URL mfe_045_001_014.pdf
Author Akiyoshi, Tatsuro| Imai, Jun| Konishi, Masami|
Abstract This paper presents a method of the controller design for the handling machine by using dsPIC(Digital Signal Processor + Peripheral Interface Controller). Recently, many manufacturing robots are operated in manufacturing facilities, with the aim of labor, cost saving, and improvement of the productivity. Such robots need to have positioning performance of high precision and simultaneously to save cost. In this paper, a digital optimal servo controller is designed, and it is implemented into our barebones controller which involves dsPIC. We have designed and manufactured the controller which is added suitable peripherals to improve the consistency between the mechanical machine operating in continuous time and controller in discrete time. The significance of this research is that digital implementation of the embedded system which has performance-limitation has ensured a comparable result, against the one with PC which has broad utility. When it is used as a controller, it is possible to restrain product prices greatly equivalent PC precision. We demonstrate potential that good control can be achieved even with low cost. Our research has lead to the viability of lower cost and higher performance system for the production process at factories.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2011-01
Volume volume45
Start Page 1
End Page 14
ISSN 1349-6115
language 英語
Copyright Holders Copyright © by the authors
File Version publisher
NAID 120002905951
JaLCDOI 10.18926/44496
FullText URL mfe_045_015_026.pdf
Author Kanatani, Kenichi| Rangrajan, Prasanna| Sugaya, Yasuyuki| Niitsuma, Hirotaka|
Abstract We present a new least squares (LS) estimator, called “HyperLS”, specifically designed for parameter estimation in computer vision applications. It minimizes the algebraic distance under a special scale normalization, which is derived by rigorous error analysis in such a way that statistical bias is removed up to second order noise terms. Numerical experiments suggest that our HyperLS is far superior to the standard LS and comparable in accuracy to maximum likelihood (ML), which is known to produce highly accurate results in image applications but may fail to converge if poorly initialized. Our HyperLS is a perfect candidate for ML initialization. In addition, we discuss how image-based inference problems have different characteristics form conventional statistical applications, with a view to serving as a bridge between mathematicians and computer engineers.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2011-01
Volume volume45
Start Page 15
End Page 26
ISSN 1349-6115
language 英語
Copyright Holders Copyright © by the authors
File Version publisher
NAID 120002905952
JaLCDOI 10.18926/44497
FullText URL mfe_045_027_036.pdf
Author Kanatani, Kenichi| Sugaya, Yasuyuki|
Abstract We describe in detail the algorithm of bundle adjustment for 3-D reconstruction from multiple images based on our latest research results. The main focus of this paper is on the handling of camera rotations and the efficiency of computation and memory usage when the number of variables is very large; an appropriate consideration of this is the core of the implementation of bundle adjustment. Computing the fundamental matrix from two views and reconstructing the 3-D structure from multiple views, we evaluate the performance of our algorithm and discuses technical issues of bundle adjustment implementation.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2011-01
Volume volume45
Start Page 27
End Page 35
ISSN 1349-6115
language 英語
Copyright Holders Copyright © by the authors
File Version publisher
NAID 80021759249
JaLCDOI 10.18926/44498
FullText URL mfe_045_036_045.pdf
Author Kanatani, Kenichi| Niitsuma, Hirotaka|
Abstract We present a new method for optimally computing the 3-D rotation from two sets of 3-D data. Unlike 2-D data, the noise in 3-D data is inherently inhomogeneous and anisotropic, reflecting the characteristics of the 3-D sensing used. To cope with this, Ohta and Kanatani introduced a technique called “renormalization”. Following them, we represent a 3-D rotation in terms of a quaternion and compute an exact maximum likelihood solution using the FNS of Chojnacki et al. As an example, we consider 3-D data obtained by stereo vision and optimally compute the 3-D rotation by analyzing the noise characteristics of stereo reconstruction. We show that the widely used method is not suitable for 3-D data. We confirm that the renormalization of Ohta and Kanatani indeed computes almost an optimal solution and that, although the difference is small, the proposed method can compute an even better solution.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2011-01
Volume volume45
Start Page 36
End Page 45
ISSN 1349-6115
language 英語
Copyright Holders Copyright © by the authors
File Version publisher
NAID 80021759250
JaLCDOI 10.18926/44499
FullText URL mfe_045_046_053.pdf
Author Nogami, Yasuyuki| Yanagi, Erika| Izuta, Tetsuya| Morikawa, Yoshitaka|
Abstract Recently, composite order pairing–based cryptographies have received much attention. The composite order needs to be as large as the RSA modulus. Thus, they require a certain pairing–friendly elliptic curve that has such a large composite order. This paper proposes an efficient algorithm for generating an ordinary pairing–friendly elliptic curve of the embedding degree 1 whose order has two large prime factors as the RSA modulus. In addition, the generated pairing–friendly curve has an efficient structure for the Gallant–Lambert–Vanstone (GLV) method.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2011-01
Volume volume45
Start Page 46
End Page 53
ISSN 1349-6115
language 英語
Copyright Holders Copyright © by the authors
File Version publisher
NAID 120002905955
JaLCDOI 10.18926/44500
FullText URL mfe_045_054_059.pdf
Author Nekado, Kenta| Takai, Yusuke| Nogami, Yasuyuki| Morikawa, Yoshitaka|
Abstract Recently, pairing–based cryptographies have attracted much attention. For fast pairing calculation, not only pairing algorithms but also arithmetic operations in extension field should be efficient. Especially for final exponentiation included in pairing calculation, squaring is more important than multiplication. This paper considers squaring algorithms efficient for cubic extension field which is often used for pairing implementaions.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2011-01
Volume volume45
Start Page 54
End Page 59
ISSN 1349-6115
language 英語
Copyright Holders Copyright © by the authors
File Version publisher
NAID 80021759252
JaLCDOI 10.18926/46948
FullText URL mfe_38_1-2_015_027.pdf
Author Torigoe, Takashi| Konishi, Masami| Imai, Jun| Nishi, Tatsushi|
Abstract In these days, mechanical systems are becoming more complex and highly automated. So, there exist wide variety of demands for reliable diagnostic technology. A reliable data analysis and quantitative diagnosis method of mechanical system is necessary for the purpose. In this paper a quantitative diagnosis method for looper height control system has been developed based on neural network technologies. The wavelet transformation is used for pre-processing to analyze characteristics of looper height control system. And, self organizing map neural network is used for the purpose of classification based on the pre-processed data. After that, the classified results are used for quantitative diagnosis in hierarchical neural network.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2004-03
Volume volume38
Issue issue1-2
Start Page 15
End Page 27
ISSN 0475-0071
language 英語
File Version publisher
NAID 80016785934
JaLCDOI 10.18926/46949
FullText URL mfe_38_1-2_029_032.pdf
Author Totsuji, Hiroo| Totsuji, Chieko| Ogawa, Takafumi| Tsuruta, Kenji|
Abstract The structure of dust particles in dusty plasmas under microgravity has been analyzed by molecular dynamics simulation. The charge neutrality condition satisfied by the system composed of dust particles and ambient plasma is properly taken into account. It is shown that dust particles form shell structures at low temperatures and the number of shells are obtained as a phase diagram in the plane of two parameters characterizing the system: the number of particles and the strength of screening. It is also shown that these structures are almost independent of the strength of screening.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2004-03
Volume volume38
Issue issue1-2
Start Page 29
End Page 32
ISSN 0475-0071
language 英語
File Version publisher
NAID 80016863328
JaLCDOI 10.18926/46950
FullText URL mfe_38_1-2_033_037.pdf
Author Liman, M. Sanusi| Totsuji, Chieko| Tsuruta, Kenji| Totsuji, Hiroo|
Abstract The dynamic structure factor and the spectrum of the momentum-density fluctuations of 2D Yukawa liquids are analyzed in the domain of weak and intermediate coupling and screenlng parameters. The dispersion relations of the longitudinal and transverse collective excitations are obtained and compared with the random phase approximation (RPA) and harmonic approximation for triangular lattice.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2004-03
Volume volume38
Issue issue1-2
Start Page 33
End Page 37
ISSN 0475-0071
language 英語
File Version publisher
NAID 80016863329
JaLCDOI 10.18926/46952
FullText URL mfe_38_1-2_039_059.pdf
Author Kanatani, Kenichi|
Abstract We investigate the meaning of "statistical methods" for geometric inference based on image feature points. Tracing back the origin of feature uncertainty to image processing operations, we discuss the implications of asymptotic analysis in reference to "geometric fitting" and "geometric model selection", We point out that a correspondence exists between the standard statistical analysis and the geometric inference problem. We also compare the capability of the "geometric AIC" and the "geometric MDL' in detecting degeneracy. Next, we review recent progress in geometric fitting techniques for linear constraints, describing the "FNS method", the "HEIV method", the "renormalization method", and other related techniques. Finally, we discuss the "Neyman-Scott problem" and "semiparametric models" in relation to geometric inference. We conclude that applications of statistical methods requires careful considerations about the nature of the problem in question.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2004-03
Volume volume38
Issue issue1-2
Start Page 39
End Page 59
ISSN 0475-0071
language 英語
File Version publisher
NAID 80016889442
JaLCDOI 10.18926/46953
FullText URL mfe_38_1-2_061_071.pdf
Author Kanatani, Kenichi| Sugaya, Yasuyuki|
Abstract The Tomasi-Kanade factorization for reconstructing the 3-D shape of the feature points tracked through a video stream is widely regarded as based on factorization of a matrix by SVD (singular value decomposition). This paper points out that the core principle is the affine camera approximation to the imaging geometry and that SVD is merely one means of numerical computation. We first describe the geometric structure of the problem and then give a complete programming scheme for 3-D reconstruction.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2004-03
Volume volume38
Issue issue1-2
Start Page 61
End Page 71
ISSN 0475-0071
language 英語
File Version publisher
NAID 80016889443
JaLCDOI 10.18926/14069
FullText URL Mem_Fac_Eng_OU_42_104.pdf
Author Donghui, MA| Torii, Tashiyuki| Shimizu, Kenichi| Matsuba, Akira|
Abstract As model specimens of surface film-bonded materials, pure copper films with a thickness of 100μm were bonded to the surface of steel base with epoxy resin, where the tensile residual stress was measured by an X-ray on the surface copper film. The distribution of initial electric resistance was measured on both copper film and base specimen by a direct current potential drop technique. As a result, there was a good agreement between the measured and theoretical values. From the fatigue testing results, it was shown that the measured electric resistance increased with the fatigue crack length on the copper film, which was almost equal to the theoretical value calculated for a central slit in a plate with finite width. This was probably because the fatigue crack was opened due to the tensile residual stress on the film even under unloading condition. In addition, the internal crack length during fatigue was examined by ultrasonic testing for the film-bonded specimen. As a result, there was a difference in the fatigue crack length between the surface copper film and the inner base.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2008-01
Volume volume42
Issue issue1
Start Page 104
End Page 109
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308537
JaLCDOI 10.18926/14096
FullText URL Mem_Fac_Eng_OU_40_1_1.pdf
Author Ma, YouLi| Shimizu, Kenichi| Torii, Tashiyuki|
Abstract A testing for bent fatigue crack propagation under mixed-mode conditions was carried out using fatigue and annealed slant precracks with different slant angles, β ,defined as the angle between loading and precrack directions in a rectangular plate. As a result, bent fatigue crack from the fatigue precrack with β =45deg. propagated under mixed-mode conditions with mode II stress intensity factor (K(II))(est) evaluated from the discontinuous displacement measured along the crack. On the other hand, bent fatigue crack from the fatigue precrack with β =60deg. and from the annealed precracks with both slant angles of β =60deg. and β =45deg. propagated under the mode I behavior. This was because the compressive residual stress near the fatigue precrack caused contact to each other between the upper and the lower surfaces of the precrack with the smaller slant angle β . Furthermore, the fatigue crack propagation rates indicated almost the same relationship for all the data, using the mixed-mode effective stress intensity factor (K(M))(est), calculated from the discontinuous displacement measured along the bent fatigue crack.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2006-01
Volume volume40
Issue issue1
Start Page 1
End Page 8
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308402
JaLCDOI 10.18926/17822
FullText URL Mem_Fac_Eng_OU_43_1.pdf
Author Shimizu, Kenichi| Torii, Tashiyuki| Ishida, Koki|
Abstract Using a fatigue testing method by which fatigue cracks can be initiated and propagated in a film adhered to cover an elliptical through-hole in a base plate subjected to push-pull cyclic loads, annealed copper films with the thickness of 100μm and those reduced the thickness from the 100μm to 50μm by an electro-polishing were fatigued under a constant stress amplitude with a stress ratio of zero. The crystal rotation behavior with the fatigue crack propagation was investigated by measuring the crystal orientation around the fatigue crack initiated from the notch root before and after fatigue testing, using EBSD (Electron Back-scatter Diffraction) method. Then, the change of crystal orientation with fatigue testing was evaluated quantitatively from the misorientation between the crystal orientation matrix on the same point obtained before and after fatigue testing. As a result, the angle of the crystal rotation obtained from the region showing the high fatigue crack propagation rate was larger than that obtained from the region showing the low fatigue crack propagation rate for the film with the thickness of 100μm, while the fatigue crack propagated faster in the film with the thickness of 50μm than that with the thickness of 100μm regardless of the small crystal rotation angles with the fatigue testing for the film with the thickness of 50μm.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2009-01
Volume volume43
Start Page 1
End Page 7
ISSN 1349-6115
language 英語
File Version publisher
NAID 120002308710
JaLCDOI 10.18926/46954
FullText URL mfe_38_1-2_073_089.pdf
Author Kenmochi, Yukiko| Imiya, Atsushi|
Abstract Boundary tracking and surface generation are ones of main topological topics for three-dimensional digital image analysis. However, there is no adequate theory to make relations between these different topological properties in a completely discrete way. In this paper, we present a new boundary tracking algorithm which gives not only a set of border points but also the surface structures by using the concepts of combinatorial/algebraic topologies. We also show that our boundary becomes a triangulation of border points (in the sense of general topology), that is, we clarify relations between border points and their surface structures.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2004-03
Volume volume38
Issue issue1-2
Start Page 73
End Page 89
ISSN 0475-0071
language 英語
File Version publisher
NAID 80016889444
JaLCDOI 10.18926/46956
FullText URL mfe_38_1-2_097_100.pdf
Author Yamagiwa, Masashi| Hirao, Taichi| Kiyomi, Masaaki| Akao, Tetsuyuki| Mizuki, Eiichi| Ohba, Michio| Sakai, Hiroshi|
Abstract Bacillus thuringiensis subsp. coreanensis A2316 is a newly isolated strain from Yonakunijima Island in Japan. It produces the proteinaceous inclusion body (crystal) which has no insecticidal and hemolytic activities. When the crystal proteins were digested by proteinase K, they exhibited the strong cytotoxicity against human leukemic T cell, MOLT-4. The proteinase K-digested A2316 crystal proteins have little damage upon the cell membrane of MOLT-4, suggesting that the cell death of MOLT-4 was induced through a mechanism other than the colloid-osmotic swelling and cell lysis as caused by hitherto known B. thuringiensis crystal proteins. The 29-kDa polypeptide proved to be an active component of the proteinase K-digested A2316 crystal proteins. EC(50) of the purified 29-kDa polypeptide was 0.0579 μg/ml. The N-terminal amino acid sequence of the 29-kDa polypeptide was identical with that of p29 produced by B. thuringiensis A1519 strain and shared no significant homology with all the known proteins, suggesting that this polypeptide belong to a new family of B. thuringiensis crystal proteins.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2004-03
Volume volume38
Issue issue1-2
Start Page 97
End Page 100
ISSN 0475-0071
language 英語
File Version publisher
NAID 80017001823