JaLCDOI 10.18926/15454
FullText URL Mem_Fac_Eng_OU_22_63.pdf
Author Myojin Syo| Kishino Keiichi| Yamada Masahito|
Abstract The paper is a case study mode choice in interregional occupational person trips. Disagregate behavioral model of logit type is applied to the occupational person trips from Tsuyama area in Okayama Prefecture to Osaka area. The model turned out to give asignificant explanation of the interregional mode choice characteristics. Travel time, travelling expenses and " with or wi thout heavy baggage " were found to be significant.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-03-31
Volume volume22
Start Page 63
End Page 70
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307421
JaLCDOI 10.18926/15451
FullText URL Mem_Fac_Eng_OU_22_45.pdf
Author Kohno, Iichiro| Nishigaki, Makoto| Takeshita, Yuji|
Abstract There are two classifications of the mechanism of levee failure caused by floods; local seepage failure and progressive failure. The fundamental causes of levee failure produced by piping and erosion were studied and the safety of river leves during floods evaluated in terms of soil machanics. The critical hydraulic gradient and the process of progressive failure were obtained from one- and two- dimensional model experiments for piping and erosion. Problems inherent in and preventive measures against levee failure are discussed. In particular, effects of the Tsukinowa method, the most representative Japanese flood fighting method, were studied experimentally and improvements proposed.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-03-31
Volume volume22
Start Page 45
End Page 62
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307536
JaLCDOI 10.18926/15450
FullText URL Mem_Fac_Eng_OU_22_35.pdf
Author Totsuji, Hiroo|
Abstract Several methods to derive thermodynamic sum rules for a system including charged particle are proposed and applied to charged mixtures as well as one-component systems. The validity of the statements is examined carefully with respect to the ordering in the powers of the wave number. As for the mixture of electrons and ions, it is shown how the aspect of the one-component plasma or the ionic mixture appears when electrons become strongly degenerate.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-03-31
Volume volume22
Start Page 35
End Page 44
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307661
JaLCDOI 10.18926/15449
FullText URL Mem_Fac_Eng_OU_22_15.pdf
Author Furutani, Yoichiro| Totsuji, Hiroo| Komaki Kunitaka| Tanabe Masahiro|
Abstract An effective potential of an isolated partially ionized high-Z ion, calculated within the framework of the statistical models of atoms, is injected into the one-electron Schrödinger equation, in view of evaluating the electron density and comparing it with the results of statistical models. Starting from this initial value, a self-consistent electron density is obtained on the basis of the density functional theory, where quantum natures of electrons are fully taken into account.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-03-31
Volume volume22
Start Page 15
End Page 34
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307361
JaLCDOI 10.18926/15446
FullText URL Mem_Fac_Eng_OU_22_1.pdf
Author Oka, Hisao| Yamamoto, Tatsuma|
Abstract Biomechanical impedance is relatively small compared to industrial mechanical impedance. Thus it is difficult to measure it precisely. A biomechanical impedance measuring system was developed for portable use by means of random excitation. This system doesn't require a fixed body and vibrator supporting apparatus. In order to obtain an impedance spectrum, the FFT processing is performed using a personal computer. The spectra of the biomechanical impedance which is measured on body surfaces depend on body positions and can be roughly classified into three spectra patterns : soft, stiff and intermediate. During the measurement, the measuring conditions (preload, diameter of the vibrating tip etc.) influence the results. However, it became clear that the linearity of the biomechanical impedance was satisfied in the limited measuring conditions. Accordingly it is possible to standardize the impedance and to compare it with the results under different measuring conditions.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 1988-03-31
Volume volume22
Start Page 1
End Page 14
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307480